4.8 Article

Smoothing Energy Transfer Enabling Efficient Large-Area Quasi-2D Perovskite Light-Emitting Diodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Vacuum-Assisted Preparation of High-Quality Quasi-2D Perovskite Thin Films for Large-Area Light-Emitting Diodes

Chaoran Chen et al.

Summary: A blade coating method with vacuum processing is developed for high-quality perovskite emitting layer deposition, achieving high external quantum efficiencies in PeLEDs. The scalability of the technology is demonstrated with the fabrication of a large-area device showing bright and uniform emitting characteristics.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Article Chemistry, Multidisciplinary

Sulfonic Zwitterion for Passivating Deep and Shallow Level Defects in Perovskite Light-Emitting Diodes

Ju Zhang et al.

Summary: In this study, perovskite composite films for high performance PeLEDs were developed using zwitterion 3-aminopropanesulfonic acid (APS) as an additive. The sulfonic group of APS can passivate deep and shallow level defects in perovskites via coordinate and hydrogen bonding, leading to improved stability and efficiency of the perovskite composite films.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Nanoscience & Nanotechnology

Exploiting the full advantages of colloidal perovskite nanocrystals for large-area efficient light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, highly efficient large-area PeLEDs with high uniformity were achieved through the use of colloidal perovskite nanocrystals. The precrystallized PNCs were not affected by the film formation process and a modified bar-coating method facilitated the formation of uniform large-area films. This method shows promise for the development of large-scale industrial displays and solid-state lighting.

NATURE NANOTECHNOLOGY (2022)

Article Chemistry, Physical

Defect Healing in FAPb(I1-xBrx)(3) Perovskites: Multifunctional Fluorinated Sulfonate Surfactant Anchoring Enables >21% Modules with Improved Operation Stability

Jun Zhu et al.

Summary: Formamidinium lead triiodide-based perovskite solar cells have shown great potential for future photovoltaic technologies. The introduction of heptadecafluorooctanesulfonic acid tetraethylammonium salt (HFSTT) as a modifier has improved the quality and stability of the perovskite films, leading to high power conversion efficiencies and long-term performance.

ADVANCED ENERGY MATERIALS (2022)

Article Multidisciplinary Sciences

Large-area and efficient perovskite light-emitting diodes via low-temperature blade-coating

Shenglong Chu et al.

Summary: Efficient large-area perovskite light emitting diodes for mass production are hindered by difficulties in obtaining uniform films and high costs. The authors demonstrate sol-gel engineering of low-temperature blade-coated perovskite films, which can address these limitations.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Distribution control enables efficient reduced-dimensional perovskite LEDs

Dongxin Ma et al.

Summary: By using a fluorinated triphenylphosphine oxide additive to control cation diffusion and passivate surfaces, the efficiency and operating lifetimes of perovskite light-emitting diodes have been improved. Although reduced-dimensional perovskites show promise in increasing stability and photoluminescence quantum yield, challenges such as lower EQEs and inferior color purities remain.

NATURE (2021)

Article Multidisciplinary Sciences

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Lingmei Kong et al.

Summary: By incorporating MeS additives to modify quasi-2D RP perovskite films, the structure is reconstructed, energy transfer is enhanced, and defect density is reduced, leading to improved light emission efficiency and device performance.

NATURE COMMUNICATIONS (2021)

Review Physics, Multidisciplinary

Materials, photophysics and device engineering of perovskite light-emitting diodes

Ziming Chen et al.

Summary: The article provides a comprehensive review of the newly developed lighting technology based on metal halide perovskites, covering materials, photophysics, and device engineering. It focuses on the compositional engineering of perovskite structures, physics underlying photo- and electroluminescence, and strategies for boosting device performance in perovskite light-emitting diodes. Key concepts include balancing electron/hole injection, suppression of parasitic carrier losses, improvement of photoluminescence quantum yield, and enhancement of light extraction.

REPORTS ON PROGRESS IN PHYSICS (2021)

Article Chemistry, Multidisciplinary

High-Performance Flexible Self-Powered Photodetectors Utilizing Spontaneous Electron and Hole Separation in Quasi-2D Halide Perovskites

Zhengxun Lai et al.

Summary: This study successfully prepared quasi-2D perovskite films with graded phase distribution using a one-step spin-coating method, and constructed self-powered vertical-structure photodetectors, showing impressive performance with high responsivity and fast response speed. These results highlight the potential of graded quasi-2D perovskite phases for next-generation optoelectronic devices.
Article Multidisciplinary Sciences

High-performance large-area quasi-2D perovskite light-emitting diodes

Changjiu Sun et al.

Summary: The performance of perovskite light-emitting diodes tends to decline as the active area increases, with severe phase-segregation identified as the cause. The introduction of L-Norvaline to construct an intermediate phase has successfully suppressed the phase-segregation, resulting in highly-efficient large-area quasi-2D films.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Domain Controlling by Compound Additive toward Highly Efficient Quasi-2D Perovskite Light-Emitting Diodes

Dezhong Zhang et al.

Summary: In this study, the crystallization process of quasi-2D perovskite films was successfully regulated by introducing a composite additive of ZrO2 nanoparticles and Cryptand complexant, resulting in narrowed n domains distribution and high-performance PeLEDs. The strategy of domain controlling by compound additive provides a powerful way to develop high-performance quasi-2D perovskite optoelectrical devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Perovskite Light-Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual-Additive Strategy for Defect Passivation and Nanostructure Regulation

Zhe Liu et al.

Summary: A synergetic dual-additive strategy was used to prepare perovskite films with low defect density and high environmental stability, leading to the formation of perovskite nanocrystals with a quasi-core/shell structure that exhibited improved stability and efficiency in green PeLEDs.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Unveiling Crystal Orientation in Quasi-2D Perovskite Films by In Situ GIWAXS for High-Performance Photovoltaics

Dong Liang et al.

Summary: GIWAXS was used to investigate the crystal orientation of quasi-2D perovskites during film fabrication process, revealing the impact of intermediate phases on crystalline growth and proposing a strategy of using simple additives to suppress their formation. This approach led to the successful fabrication of high-oriented quasi-2D perovskite solar cells with improved performance.
Article Multidisciplinary Sciences

Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

Peipei Du et al.

Summary: The article discusses the fabrication of efficient CsPbBr3 PeLEDs using a vacuum deposition technique, achieving an external quantum efficiency (EQE) of 8.0% and demonstrating a functional area PeLED of 40.2 cm(2) for potential display applications. The strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters

Yatao Zou et al.

Summary: The chelate effect plays a critical role in controlling the crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses, enhancing the coordination affinity and ultimately improving the efficiency of perovskite light-emitting diodes (PeLEDs).

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Unveiling the additive-assisted oriented growth of perovskite crystallite for high performance light-emitting diodes

Lin Zhu et al.

Summary: Solution-processed metal halide perovskites with additives play a crucial role in passivating defects and influencing the crystallization process. By tracking chemical interactions and crystallographic evolution, suitable additives can be found to improve the quality of perovskite films and device performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Interfacial Anchoring Effect Enables Efficient Large-Area Sky-Blue Perovskite Light-Emitting Diodes

Yang Shen et al.

Summary: This study presents an interface engineering scheme using a multifunctional molecule APDO to manipulate the crystallization of perovskite films, resulting in improved radiative recombination and hole-transport capability for large-area blue perovskite light-emitting diodes. The interface engineering enabled sky-blue perovskite films with uniformity and low trap states, leading to enhanced device performance with peak external quantum efficiency of 9.2% for 100 mm^2 devices and up to 6.1% for 400 mm^2 devices.

ADVANCED SCIENCE (2021)

Article Optics

Triplet management for efficient perovskite light-emitting diodes

Chuanjiang Qin et al.

NATURE PHOTONICS (2020)

Article Optics

Large-area near-infrared perovskite light-emitting diodes

Xiaofei Zhao et al.

NATURE PHOTONICS (2020)

Article Nanoscience & Nanotechnology

High-Efficiency Perovskite Light-Emitting Diodes with Improved Interfacial Contact

Ruiying Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Suppressing Ion Migration Enables Stable Perovskite Light-Emitting Diodes with All-Inorganic Strategy

Lin Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Engineering, Electrical & Electronic

Efficient light-emitting diodes from mixed-dimensional perovskites on a fluoride interface

Baodan Zhao et al.

NATURE ELECTRONICS (2020)

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Nanoscience & Nanotechnology

Perovskite energy funnels for efficient light-emitting diodes

Mingjian Yuan et al.

NATURE NANOTECHNOLOGY (2016)

Article Optics

Highly efficient quantum dot near-infrared light-emitting diodes

Xiwen Gong et al.

NATURE PHOTONICS (2016)

Article Chemistry, Multidisciplinary

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Jizhong Song et al.

ADVANCED MATERIALS (2015)

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

Article Biochemical Research Methods

Quantitative analysis of molecular surface based on improved Marching Tetrahedra algorithm

Tian Lu et al.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2012)

Article Materials Science, Multidisciplinary

Higher-accuracy van der Waals density functional

Kyuho Lee et al.

PHYSICAL REVIEW B (2010)