☆ 4.5 Review

State-of-the-art of polyimide films reinforced with fullerene-design, features and applications

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Composites

A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: Challenges and recommendations for future improvement

Victor E. Ogbonna et al.

Summary: In recent years, advancements in improving the mechanical and tribological properties of polyimide nanocomposites have been significant. However, issues with interfacial adhesion and surface properties degradation have affected their performance. This review summarizes the effects of various nanofillers on the properties of polyimide nanocomposites and provides suggestions for further improvement.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Adsorption and electronic properties of pristine and Al-doped C60 fullerenes using N2O molecule: A theoretical study

Amal M. Alsubaiyel et al.

Summary: The adsorption behaviors of N2O on C60 and Al@C59 fullerenes were studied using density functional theory (DFT). The feasibility of using pristine and Al@C59 fullerenes as N2O absorbents was evaluated, and the electronic properties of the adsorption complexes were analyzed. The interaction between N2O and the fullerenes exhibited binding energies ranging from 0.2 to 41.2 kJ/mol. Al@C59 fullerene showed significant improvement in the sensitivity of N2O, making it a suitable sensor for N2O gas.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Materials Science, Composites

Enhanced mechanical and electrical properties of ECR-glass reinforced polyimide composites with incorporation of TiO2 for insulation applications

Victor E. Ogbonna et al.

Summary: This paper presents the mechanical behavior and electrical properties of novel composites consisting of ECR-glass reinforced polyimide loaded with TiO2 nanoparticles. The results show that the incorporation of TiO2 nanoparticles improves the hardness, stiffness, and elastic modulus of the composites, while reducing the dielectric constant, dielectric loss, and electrical conductivity.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Polymer Science

Colorless polyimide films with low birefringence and retardation: Synthesis and characterization

Xiaohong Li et al.

Summary: Two series of polyimides were synthesized using one-step solution polycondensation. These polyimides showed good solubility, high transparency, low optical birefringence, and low optical anisotropy. They also exhibited high thermal stability, with the lowest birefringence and good transparency observed in PI-1c.

POLYMER (2023)

添加到收藏夹

Article Engineering, Environmental

Multifunctional carbon fiber@NiCo/polyimide films with outstanding electromagnetic interference shielding performance

Jianwei Li et al.

Summary: This study developed EMI shielding materials with outstanding absorption performance, fabricated through a two-step pyrolysis and vacuum-assisted filtration method. The flexible composite film obtained from chopped carbon fibers wrapped with NiCo2O4 nanowire arrays displayed superior EMI shielding effectiveness, indicating promising applications in advanced microelectronic systems for EMI shielding and thermal management.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

High-temperature polyimide dielectric materials for energy storage: theory, design, preparation and properties

Xue-Jie Liu et al.

Summary: This review discusses the key parameters and recent developments in dielectric capacitors with high operating temperature, focusing on the potential of Polyimide (PI) as a dielectric material. It also analyzes synthetic strategies for new functional PI, design engineering of nanofillers, and multilayer structures of PIs. Future research should concentrate on the synthesis of new functional PI and the design of nanofillers and multilayer structures.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Review Polymer Science

A review on polyimide reinforced nanocomposites for mechanical, thermal, and electrical insulation application: challenges and recommendations for future improvement

V. E. Ogbonna et al.

Summary: Polyimide nanocomposites have attracted attention for their superior dielectric, thermal, and corona resistance properties. While they have been used in various applications, issues with interfacial bonding have hindered their mechanical performance in thermal and electrical insulation. Further research and advancements need to be made to improve the properties of polyimide nanocomposites for insulation applications.

POLYMER BULLETIN (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Donor moieties with D-π-a framing modulated electronic and nonlinear optical properties for non-fullerene-based chromophores

Muhammad Nadeem Arshad et al.

Summary: A series of non-fullerene-based substantial chromophores with a D-pi-A framework were designed and studied. The results showed that these chromophores have lower band gaps and efficient charge transfer mechanism, which is significant for nonlinear optical technology.

RSC ADVANCES (2022)

添加到收藏夹

Article Engineering, Environmental

Temperature resistant amorphous polyimides with high intrinsic permittivity for electronic applications

Weiwen Zheng et al.

Summary: By accurate design and polycondensation, a new high-k polyimide with amorphous state, high thermal stability, and self-standing properties is synthesized. It exhibits both high and stable permittivity and excellent thermal stability, making it suitable for energy storage and low-voltage electronic applications even at high temperature.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Polymer Science

Preparation and properties of colorless and transparent semi-alicyclic polyimide films with enhanced high-temperature dimensional stability via incorporation of alkyl-substituted benzanilide units

Xin-Xin Zhi et al.

Summary: By using methyl-substituted benzanilide containing organo-soluble polyimide resins, two colorless and transparent polyimide films with enhanced high-temperature dimensional stability were prepared. The films showed good solution-processability and high optical transparency.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Based on rigid xanthone group and hydrogen bonding to construct polyimide films with low coefficient of thermal expansion, high temperature resistance, and fluorescent property

Long Jiao et al.

Summary: In recent years, the increasing attention has been focused on polyimide (PI) substrate materials with high Tg and low CTE in the rapid development of the flexible OLED field. By designing rigid conjugated structures and hydrogen bonds, the performance of PI films can be improved, but different synthesis methods and components result in different performance characteristics.

EUROPEAN POLYMER JOURNAL (2022)

添加到收藏夹

Article Polymer Science

Transparent polyimide films with ultra-low coefficient of thermal expansion

Tingting Zhang et al.

Summary: New aromatic dianhydride monomers with amide bond structure were synthesized for the application of colorless transparent polyimide (CPI) film with low coefficient of thermal expansion (CTE) in the field of OLED display. CPI films were prepared and showed excellent optical properties, heat stability, and mechanical strength by incorporating amide groups and biphenyl, benzene, or ether bonds into the dianhydride monomer.

HIGH PERFORMANCE POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Multifunctional polyimide films with superheat-resistance, low coefficient of thermal expansion and fluorescence performance

Long Jiao et al.

Summary: A series of novel aromatic polyimide films containing xanthone moiety were prepared and their properties were extensively studied. One of the films shows potential applications in the flexible OLED field, and the xanthone moiety provides fluorescence performance.

POLYMER (2022)

添加到收藏夹

Article Chemistry, Applied

Comparison of new bio-based epoxide-amine coatings with their nanocomposite coating derivatives (graphene, CNT, and fullerene) as replacements for BPA

Ilknur Babahan-Bircan et al.

Summary: The thermal and mechanical properties of new bio-based epoxy-amine coatings and their nanocomposite derivatives including graphenes, carbon nanotubes (CNTs) and fullerenes were compared. The results showed that the epoxy-amine nanocomposite coatings exhibited better thermal and mechanical performance compared to epoxy-amine coatings.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Chemistry, Physical

Modulation of the optoelectronic properties of polyimide (Kapton-H) films by gamma irradiation for laser attenuation and flexible space structures

A. M. Ismail et al.

Summary: Polyimide (PI or Kapton-H), with its excellent insulation, transparency and flexibility, has been proven to have great potential in the fields of optoelectronics, nuclear technology and space industry. This study focuses on investigating the effects of gamma-irradiation on the structural, optical, electrical and dielectric properties of PI film samples. The results reveal changes in crystallite size, absorption edge, refractive index and various spectroscopic bands. The study also explores the impact of gamma-irradiation on the non-linear properties and electrical conductivity of the PI samples.

RADIATION PHYSICS AND CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Characteristics of the Colorless Polyimide-Based Flexible X-ray Detector with Non-Fullerene Acceptor Polymer

Jehoon Lee et al.

Summary: This paper investigates the characteristics of a colorless polyimide film-based flexible organic X-ray detector. The colorless polyimide film, with excellent visible light transmission and physical and chemical stability, can be applied to various applications. The deformation curvature of the colorless polyimide substrate shows similar properties to that of the glass substrate. The proposed detector uses PBDB-T as a donor and PC71BM and ITIC as acceptors. The sensitivity of the detector with ITIC acceptor is 46.82% higher than that with PC71BM acceptor at a bending curvature of R=10 and 135.85% higher at the same curvature with 500 bending cycles.

NANOMATERIALS (2022)

添加到收藏夹

Article Crystallography

Influence of Surface Relief on Orientation of Nematic Liquid Crystals: Polyimide Doped with WS2 Nanotubes

Natalia Kamanina et al.

Summary: The influence of adding WS2 nanotubes to the polyimide substrate film on the orientation of liquid crystal molecules is studied, providing a new approach for controlling the orientation of LC molecules.

CRYSTALS (2022)

添加到收藏夹

Article Engineering, Chemical

Reducing Intermolecular Friction Work: Preparation of Polyimide Films with Ultralow Dielectric Loss from MHz to THz Frequency

Qian Yin et al.

Summary: In this study, a novel liquid-crystal-like polyimide film was designed to reduce the dielectric loss by minimizing intermolecular friction work. The experimental results showed that the liquid-crystal-like film exhibited extremely low Df values at high frequencies and demonstrated excellent overall properties.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Comparison of the properties of polyimide nanocomposite films containing functionalized-graphene and organoclay as nanofillers

Moon Young Choi et al.

Summary: Poly(amic acid) was prepared by the reaction of dianhydride and diamine, and two types of fillers were dispersed in the acid via a solution intercalation method. Polyimide hybrid films were synthesized under various heat treatment conditions. The effects of different nanofiller contents on the properties of the hybrid films were investigated.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Phase behavior of π-conjugated polymer and non-fullerene acceptor (PTB7-Th:ITIC) solutions and blends

Jung Yong Kim et al.

Summary: Phase diagrams of ternary pi-bonded polymer (PTB7-Th) solutions were constructed to investigate the effects of molecular weight, temperature, and electron acceptor species on the solution properties. The morphologies and surface properties of blends composed of PTB7-Th and ITIC were examined using atomic force microscopy and water contact-angle goniometer. The results revealed a phase transition in the PTB7-Th:ITIC system at around 60-70 wt.% ITIC.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Polymer Science

Soluble sulfoxide biphenyl polyimide film with transmittance exceeding 90%

Jiulin Shen et al.

Summary: This study successfully fabricated a soluble sulfoxide biphenyl polyimide with high optical performance and thermal durability. The transparency was further improved by a low-temperature process and an inorganic anti-reflection coating, making it suitable for foldable displays.

POLYMER (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Facile synthesis of super-thermal insulating polyimide aerogel-like films

Jing Ma et al.

iScience (2022)

添加到收藏夹

Article Polymer Science

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in-situ synthesis compounding

Shang Ke Yang et al.

Summary: This study employed PVP@BT nanoparticles as functional nanofillers to fill PI matrix and fabricated PI nanocomposite films. The results showed that the addition of PVP@BT nanoparticles enhanced the molecular weight, viscosity, and dispersion of the nanocomposite films, leading to improved dielectric properties. The nanocomposite films with 10 wt% PVP@BT nanoparticles exhibited a higher dielectric constant and lower dielectric loss compared to pure PI. Additionally, both pure PI and PI nanocomposite films showed excellent thermal stability.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Resistive Switching Characteristics of Fullerene (C60) in Polymannose Thin Film

Kuan Yew Cheong et al.

Summary: This study systematically investigates the effects of incorporating C60 in polymannose-based resistive switching memory for the first time. The use of C60 improves the endurance, stability, and ON/OFF ratio of the devices.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2022)

添加到收藏夹

Review Chemistry, Applied

Progress in low dielectric polyimide film - A review

Yahui Li et al.

Summary: This article reviews the recent research progresses in low-k PI film, including both intrinsic and porous low-k PI films. The dielectric loss (D-f) and the influencing factors are analyzed. The advantages and disadvantages of different routes to generate low-k PI film are summarized, and the dielectric properties, thermal stability, and mechanical properties are compared. This article aims to gain a deeper understanding about low-k PI film and provide a reference for its future development.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Polymer Science

Ultra-high Tg and ultra-low CTE polyimide films based on tunable interchain crosslinking

Long Jiao et al.

REACTIVE & FUNCTIONAL POLYMERS (2022)

添加到收藏夹

Article Engineering, Mechanical

Role of fullerene carbon on tribological performance of polyimide composites at a large temperature span

Qi Huimin et al.

Summary: The effect of fullerene carbon (C60) on the tribological performance of polyimide (PI) composites was investigated at different temperature conditions. The addition of 1.0 wt% C60 was found to greatly enhance the tribological performance, reducing friction coefficients and wear rates compared to pure PI. XPS results suggested the tribo-oxidation and organic-inorganic chelation reaction played a role in the growth of the tribofilm. Molecular dynamics simulation showed that C60 enabled easy shear of PI due to decreased intermolecular forces.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Polymer Science

Selective Destruction of Soluble Polyurethaneimide as Novel Approach for Fabrication of Insoluble Polyimide Films

Andrey L. Didenko et al.

Summary: A novel method for fabricating films based on non-soluble polymers was proposed in this study. By selectively decomposing soluble blocks, an insoluble polyimide film was successfully obtained. The polymeric films obtained by controlled decomposition showed good solvent resistance and similar properties to the homopolymer.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Carboxylated Carbon Nanotube/Polyimide Films with Low Thermal Expansion Coefficient and Excellent Mechanical Properties

Cheng Lu et al.

Summary: In this study, flexible and low CTE PI films modified by C-CNT were fabricated, with the 9 wt.% and 5 wt.% C-CNT/PI films demonstrating the lowest CTE value and highest mechanical properties.

POLYMERS (2022)

添加到收藏夹

Article Optics

Comment on ?Multiple locations of boron atoms in the exohedral and endohedral C60 fullerene?

Jianzhi Xu et al.

Summary: This study theoretically investigated the structures of boron atoms binding in C60, and found that the previously used theoretical methods may be unreliable. The study corrected the previously identified stable structures with more extensive and systematic calculations.

PHYSICAL REVIEW A (2022)

添加到收藏夹

Article Chemistry, Physical

Investigation into self-assembled collagen arrays guided by the surface properties of polyimide films

Yadong Chai et al.

Summary: The mechanism of highly-oriented collagen fibril arrays on rubbed polyimide films has been investigated, revealing the interfacial Col-PI interactions. It was found that the orientation of surface functional groups on the rubbed PI films can be effectively controlled by the rubbing conditions. Nano-grooves with certain dimensions were formed on the surfaces of the films, leading to the highest density of collagen fibril arrays. The orientation and density of the fibril arrays were controlled by the interfacial interactions between the beta-Sheet component of Col and the nano-groove surfaces of the rubbed PI films. This novel technology provides an effective method to fabricate one-directional fibrous nanostructures and control the orientation of biomolecules in vitro.

SOFT MATTER (2022)

添加到收藏夹

Article Chemistry, Physical

Polyimide photodevices without a substrate by electron-beam irradiation

Hongji Yoon et al.

Summary: This study implemented an optoelectronic device comprising only PI, optimizing its photocharacteristics through electron-beam irradiation treatment to achieve higher light absorption and conductive properties. The PI photodetector exhibited a detectivity of 6.38 x 1010 Jones under laser illumination and maintained stability in mechanical characteristics through cyclic bending tests.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Construction of polyimide films with excellent dimensional stability and toughness via incorporating point-to-face multi-coordination structure

Qian Yin et al.

Summary: A novel polyimide film with excellent dimensional stability and toughness was designed in this study, featuring a point-to-face multi-coordination structure. The film exhibited outstanding performance under high temperature, multiple heating-cooling cycles, and cyclic tension due to the destruction and rapid reconstruction of the point-to-face multi-coordination structure. Compared to traditional polyimide films, the film with 20mol% Cu2+ showed significantly reduced thermal expansion coefficient and increased tensile strength, breaking elongation, and fracture energy.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Polymer Science

Improving dimensional stability at high temperature and toughness of polyimide films via adjustable entanglement density

Jiang Yi et al.

Summary: By controlling molecular weight and solid content, the dimension stability and toughness of PI films were improved, leading to increase of Tg, decrease of CTE, and significant enhancement of mechanical properties.

POLYMER (2021)

添加到收藏夹

Article Polymer Science

Liquid Crystalline Polyimide Films with High Intrinsic Thermal Conductivities and Robust Toughness

Kunpeng Ruan et al.

Summary: By optimizing the preparation conditions, highly thermally conductive liquid crystal polyimide films were fabricated, exhibiting significantly improved thermal conductivity compared to traditional polyimide films. These films have promising applications in high-heating flexible electronics due to their excellent mechanical and thermal properties.

MACROMOLECULES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrospray Printing of Polyimide Films Using Passive Material Focusing

Bryce J. Kingsley et al.

Summary: In electrospray printing, a high electric potential is used to atomize liquid solution and print onto a target substrate. The use of a passive electrostatic funnel helps focus the print material, though it also results in material deflection from the target; furthermore, the distance from the emitter to the target substrate is a key print parameter affecting film growth rates.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

[n]Cyclodibenzopentalenes as Antiaromatic Curved Nanocarbons with High Strain and Strong Fullerene Binding

Jan S. Woessner et al.

Summary: The discovered [n]CDBPs exhibit antiaromaticity, form cylindrical structures, can bind with fullerenes, and have high HOMO energies, low LUMO energies, and small band gaps.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Polymer Science

Development and characterization of strong, heat-resistant and thermally conductive polyimide/nanodiamond nanocomposites

Seira Morimune-Moriya et al.

Summary: Polymer nanocomposites based on PI and ND were prepared by in-situ polymerization, with highly dispersed ND in PI matrix achieving excellent mechanical and thermal properties at very low ND content. The properties were significantly enhanced by the addition of only a small amount of ND.

POLYMER (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Applications of polyimide coatings: a review

Ayse Sezer Hicyilmaz et al.

Summary: Polyimides are high-performance polymers used in aerospace, medical, and electronics industries in various forms. Among them, coating plays a significant role in developing advanced structures with different functions for high-tech industries through an economical way. This study aimed to report the broad application status of polyimide coatings and assist in selecting suitable types and production methods for future product applications.

SN APPLIED SCIENCES (2021)

添加到收藏夹

Review Polymer Science

Advances in condensation polymer containing zero-dimensional nanocarbon reinforcement-fullerene, carbon nano-onion, and nanodiamond

Ayesha Kausar

Summary: This review discusses the unique properties of nanocarbon fillers in forming nanocomposites with condensation polymers, highlighting their potential in various applications such as eco-friendly materials, aerospace, automotive, and biomedical fields.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

High-temperature-resistant and colorless polyimide: Preparations, properties, and applications

Chenghan Yi et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fullerene-Enhanced Triboelectric Nanogenerators

Prakash Parajuli et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

添加到收藏夹

Review Polymer Science

Holistic insights on polyimide nanocomposite nanofiber

Ayesha Kausar

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2020)

添加到收藏夹

Article Polymer Science

High heat-resistant polyimide films containing quinoxaline moiety for flexible substrate applications

Tuan-Qing Liu et al.

POLYMER (2020)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Fullerene and its applications: A review

Poulomi Bhakta et al.

JOURNAL OF INDIAN ACADEMY OF ORAL MEDICINE AND RADIOLOGY (2020)

添加到收藏夹

Article Materials Science, Composites

Reversibly cross-linked fullerene/polyamide composites based on Diels-Alder reaction

Jingjing Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Physics, Multidisciplinary

A review of non-fullerene polymer solar cells: from device physics to morphology control

Robert S. Gurney et al.

REPORTS ON PROGRESS IN PHYSICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Advances in Polyimide-Based Materials for Space Applications

Irina Gouzman et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Materials Science, Composites

A review on high temperature resistant polyimide films: Heterocyclic structures and nanocomposites

Pengchang Ma et al.

COMPOSITES COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Composites

Polyimide nanocomposites with functionalized graphene sheets: Thermal property, morphology, gas permeation, and electroconductivity

Jin-Hae Chang

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Flexible and Stretchable Smart Display: Materials, Fabrication, Device Design, and System Integration

Ja Hoon Koo et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Large-scale synthesis of single-crystalline self-standing SnSe2 nanoplate arrays for wearable gas sensors

Ming Chen et al.

NANOTECHNOLOGY (2018)

添加到收藏夹

Article Polymer Science

Molecular Dynamics Simulations of Fullerene Diffusion in Polymer Melts

Igor V. Volgin et al.

MACROMOLECULES (2017)

添加到收藏夹

Article Physics, Applied

High performance thin film transistor (flex-TFT) with textured nanostructure ZnO film channel fabricated by exploiting electric double layer gate insulator

Rishi Ram Ghimire et al.

APPLIED PHYSICS LETTERS (2017)

添加到收藏夹

Article Automation & Control Systems

Development of hybrid process for double-side flexible printed circuit boards using roll-to-roll gravure printing, via-hole printing, and electroless plating

Janghoon Park et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Transparent Indium Tin Oxide Electrodes on Muscovite Mica for High-Temperature-Processed Flexible Optoelectronic Devices

Shanming Ke et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Silver Nanowire Embedded Colorless Polyimide Heater for Wearable Chemical Sensors: Improved Reversible Reaction Kinetics of Optically Reduced Graphene Oxide

Seon-Jin Choi et al.

SMALL (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Graphene-based wearable temperature sensor and infrared photodetector on a flexible polyimide substrate

Parikshit Sahatiya et al.

FLEXIBLE AND PRINTED ELECTRONICS (2016)

添加到收藏夹

Article Chemistry, Medicinal

Information Entropy of Fullerenes

Denis Sh. Sabirov et al.

JOURNAL OF CHEMICAL INFORMATION AND MODELING (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on colorless and optically transparent polyimide films: Chemistry, process and engineering applications

Hong-jiang Ni et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Colorless and transparent polyimide nanocomposites: Comparison of the properties of homo- and co-polymers

Chang Hwon Choi et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)

添加到收藏夹

Review Chemistry, Organic

Synthesis of fullerenes

Martha Mojica et al.

JOURNAL OF PHYSICAL ORGANIC CHEMISTRY (2013)

添加到收藏夹

Review Polymer Science

Polyimide memory: a pithy guideline for future applications

Tadanori Kurosawa et al.

POLYMER CHEMISTRY (2013)

添加到收藏夹

Article Chemistry, Analytical

Flexible polyimide chemical sensors using platinum nanoparticles

E. Skotadis et al.

SENSORS AND ACTUATORS B-CHEMICAL (2013)

添加到收藏夹

Article Polymer Science

Preparation and properties of polyimide/graphene oxide nanocomposite films with Mg ion crosslinker

Jin-Yeon Kong et al.

EUROPEAN POLYMER JOURNAL (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Polyimide-fullerene nanostructured materials for nonlinear optics and solar energy applications

N. V. Kamanina et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2012)

添加到收藏夹

Review Polymer Science

Advanced polyimide materials: Syntheses, physical properties and applications

Der-Jang Liaw et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Thermodynamics

Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20

S. M. Sarathy et al.

COMBUSTION AND FLAME (2011)

添加到收藏夹

Article Physics, Applied

Bulk-trap modulated Maxwell-Wagner type interfacial carrier relaxation process in a fullerene/polyimide double-layer device investigated by time-resolved second harmonic generation

Le Zhang et al.

JOURNAL OF APPLIED PHYSICS (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Comparison of the photosensitivity and bacterial toxicity of spherical and tubular fullerenes of variable aggregate size

So-Ryong Chae et al.

JOURNAL OF NANOPARTICLE RESEARCH (2011)

添加到收藏夹

Article Engineering, Chemical

Transparent Polyimide Nanocomposite Films: Thermo-Optical Properties, Morphology, and Gas Permeability

Ungki Min et al.

POLYMER ENGINEERING AND SCIENCE (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress in morphology control of supramolecular fullerene assemblies and its applications

Sukumaran Santhosh Babu et al.

CHEMICAL SOCIETY REVIEWS (2010)

添加到收藏夹

Article Mechanics

The effect of fullerene fillers on the mechanical properties of polymer nanocomposites

V. V. Zuev et al.

MECHANICS OF COMPOSITE MATERIALS (2010)

添加到收藏夹

Article Physics, Applied

Fullerene Fine Crystals with Unique Shapes and Controlled Size

Akito Masuhara et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2009)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Research Highlights

R Banerjee

Nanomedicine (2009)

添加到收藏夹

Article Chemistry, Physical

DFT studies of functionalized carbon nanotubes and fullerenes as nanovectors for drug delivery of antitubercular compounds

Marco Gallo et al.

CHEMICAL PHYSICS LETTERS (2007)

添加到收藏夹

Article Materials Science, Composites

Nanostructure evolution during thermal treatment of polyimide-fullerene composites as revealed by WAXS and SAXS

M. E. Cagiao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Review Chemistry, Multidisciplinary

Structural aspects of fullerene chemistry - A journey through fullerene chirality

Carlo Thilgen et al.

CHEMICAL REVIEWS (2006)

添加到收藏夹

Article Chemistry, Physical

On Kekule structures of buckminsterfullerene

D Vukicevic et al.

CHEMICAL PHYSICS LETTERS (2005)

添加到收藏夹

Article Physics, Condensed Matter

Thermal desorption states of C-60 fullerene molecules in polymer matrices

AO Pozdnyakov et al.

PHYSICS OF THE SOLID STATE (2005)

添加到收藏夹

Article Crystallography

Silicon nitride and polyimide capping layers on InGaAs/InP PIN photodetector after sulfur treatment

MR Ravi et al.

JOURNAL OF CRYSTAL GROWTH (2004)

添加到收藏夹

Article Physics, Condensed Matter

Thermally stimulated desorption of C-60 and C-70 fullerenes from rigid-chain polyimide films

AO Pozdnyakov et al.

PHYSICS OF THE SOLID STATE (2004)

添加到收藏夹

Article Multidisciplinary Sciences

Miniaturized gas ionization sensors using carbon nanotubes

A Modi et al.

NATURE (2003)

添加到收藏夹

Article Chemistry, Applied

Fullerene-modified polyimide derived from 3,3′,4′,-benzophenonetetracarboxylic acid and 3,3′-diaminobenzophenone for casted items and its use in tribology

GN Gubanova et al.

RUSSIAN JOURNAL OF APPLIED CHEMISTRY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optical properties of the fullerene-doped polyimide in the near infrared

NV Kamanina et al.

SYNTHETIC METALS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanisms of optical limiting in π-conjugated organic system:: fullerene-doped polyimide

NV Kamanina

SYNTHETIC METALS (2002)

添加到收藏夹

Article Physics, Applied

Thermodesorption states of fullerene C-60 in the polyimide-fullerene system

AO Pozdnyakov et al.

TECHNICAL PHYSICS LETTERS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.