☆ 4.5 Article

Optimal shape selection of pseudo-rigid-body model compliant centrifugal clutch manufactured by thermoplastics using TOPSIS approach

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Cutting force, Vibration, and Temperature in Drilling on a Thermoplastic Material of PEEK

Dar-Yuan Chang et al.

Summary: This study analyzed the machining characteristics of Polyetheretherketone (PEEK) drilling using multiple sensors. The results showed that the feed rate has a greater effect on thrust force compared to spindle speed. Low-level spindle speed and feed rate can minimize cutting force and acceleration amplitude. In addition, the temperature within the drilling area is inversely related to the feed rate, and a high-level feed rate promotes the formation of regular curl chips.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Materials Science, Composites

In-situ temperature monitoring during rotary ultrasonic-assisted drilling of fiber-reinforced composites

Abhinav Shard et al.

Summary: This study proposes a rotary ultrasonic-assisted drilling technique using diamond-impregnated tools to reduce thermal damage in composite materials. The influence of drilling parameters on temperature elevations was monitored, and the results showed that rotational speed and abrasive grit size have the highest impact. Increasing ultrasonic power during drilling can minimize temperature elevations.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Review Engineering, Multidisciplinary

Parametric optimization of non-traditional machining processes using multi-criteria decision making techniques: literature review and future directions

Kanak Kalita et al.

Summary: The development of non-traditional machining processes has enabled the generation of complex features on hard materials, with applications in various industries. This paper provides a comprehensive review of the applications of multi-criteria decision making techniques for parametric optimization of non-traditional machining processes. Future directions for further research are also discussed.

MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN (2023)

添加到收藏夹

Article Materials Science, Composites

Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques

Omar Hussain et al.

Summary: This study focused on evaluating the tribological behavior of UHMWPE with different counterface materials under dry and lubricated sliding conditions. The results showed that UHMWPE performed better under synovial fluid lubrication conditions. Optimization techniques were used to determine the optimal conditions, and it was found that Ti6Al4V counterface material with a normal load of 52 N exhibited the best tribological performance with UHWMPE. The analysis of variance revealed that load was the most significant parameter affecting the coefficient-of-friction (COF) and specific wear rate (WR).

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

On material selection for topology optimized compliant mechanisms

Johannes Achleitner et al.

Summary: This paper fills the gap in the literature regarding selection of optimal materials for compliant mechanism design by using density-based, geometrically robust, stress constrained topology optimization methods. Large-scale optimization studies are conducted to identify the best suited material characteristics, while exploring the influence of critical optimization parameters on material choice. Guidelines for efficient selection of materials for compliant mechanism designers are developed based on the research findings.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Chemistry, Physical

Ameliorating the Wear Defiance of HVOF Thermal Spray Silicon Carbide Coated Ti-6Al-4V Alloy Using PCA-GRA Technique

S. Thirumalvalavan et al.

Summary: This study investigates the impact of high-velocity oxygen fuel (HVOF) process variables on the wear and mechanical properties of SiC coating on Ti-6Al-4V alloy. Optimization using grey relational analysis and principal component analysis reveals that the optimal parameters for reducing wear rate are a spraying distance of 228 mm, oxygen flow rate of 34 lpm, powder feeding rate of 90 g/min, and carrier gas flow rate of 60 lpm.

SILICON (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Hybrid TOPSIS-PR-GWO Approach for Multi-objective Process Parameter Optimization

Kanak Kalita et al.

Summary: This paper introduces a novel hybridized multi-objective optimization approach called TOPSIS-PR-GWO by combining TOPSIS and GWO for parametric optimization. The results of the experiments show that this method provides significantly better solutions and requires less computational time compared to the conventional approach.

PROCESS INTEGRATION AND OPTIMIZATION FOR SUSTAINABILITY (2022)

添加到收藏夹

Article Instruments & Instrumentation

Measurement uncertainty analysis of a measurement flexure hinge in a torque standard machine

Kai Geva et al.

Summary: This paper presents an alternative method using a hinge flexure to measure FT and TM under a static multi-component load. The method is applied to the 5 MN m torque standard machine at PTB to detect calibration torque moment shunts. The measurement principle involves displacement measurement by an interferometer and determination of the flexure stiffness in a special CSU. The paper discusses and quantifies essential measurement uncertainty influences and presents the measurement uncertainty budget for this method.

JOURNAL OF SENSORS AND SENSOR SYSTEMS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Prediction of Fatigue Life for a New 2-DOF Compliant Mechanism by Clustering-Based ANFIS Approach

Ngoc Thoai Tran et al.

Summary: Fatigue life prediction of 2-DOF compliant mechanism is studied for the first time in this article using a method that combines differential evolution algorithm and adaptive neuro-fuzzy inference system with subtractive clustering. The proposed method shows high accuracy in two case studies with steel A-36 and AL 6061-T6 materials. The statistical test demonstrates that the proposed method outperforms traditional methods in fatigue life prediction for 2-DOF compliant mechanism.

MATHEMATICAL PROBLEMS IN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Synthesis of compliant mechanisms with selective compliance - An advanced procedure

Stephanie Kirmse et al.

Summary: By utilizing compliant mechanisms, controlled deformations can be achieved, but mechanisms with distributed compliance may deviate from desired behavior. Selective compliant mechanisms are advanced structures that can approximate ideal behavior. A new synthesis approach, which incrementally linearizes the optimization problem, is presented for the stable synthesis of mechanisms with multiple output degrees of freedom.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental investigations of spontaneous damage to wet multi-plate clutches with carbon friction linings

D. Groetsch et al.

Summary: This study conducted experimental research on the spontaneous damage behavior of Carbon friction linings in wet multi-plate clutches, showing excellent endurance and suitability for high-performance applications. It was also found that steel plate thickness had no clear influence on spontaneous damage, and C/C friction linings demonstrated outstanding performance in high-speed applications.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH (2021)

添加到收藏夹

Article Engineering, Mechanical

Application of topological optimisation methodology to hydrodynamic thrust bearings

Kalle Kalliorinne et al.

Summary: The geometry of hydrodynamic thrust bearings significantly impacts their performance, and optimizing the shape can increase load carrying capacity. Engineers are striving to produce more sustainable bearings, which require meeting the demand for lower friction and higher load capabilities.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Mechanical stress and deformation in the rotors of a high-speed PMSM and IM

Martin Enno Gerlach et al.

Summary: This study focuses on analyzing the mechanical stress and deformation of high-speed electric machine rotors, and verifying the results through finite element simulation and spin tests. The findings show that both designs do not exceed the maximum mechanical stress for the defined operating range. The IM rotor exhibits plastic and elastic deformation, while the PMSM rotor shows more plastic deformation.

ELEKTROTECHNIK UND INFORMATIONSTECHNIK (2021)

添加到收藏夹

Review Mechanics

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

Mingxiang Ling et al.

APPLIED MECHANICS REVIEWS (2020)

添加到收藏夹

Review Materials Science, Composites

Friction and wear characteristics of fibre-reinforced plastic composites

R. Vinayagamoorthy

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

A CPRBM-based method for large-deflection analysis of contact-aided compliant mechanisms considering beam-to-beam contacts

Mohui Jin et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A Hybrid Computational Method of Desirability, Fuzzy Logic, ANFIS, and LAPO Algorithm for Multiobjective Optimization Design of Scott Russell Compliant Mechanism

Tran Ngoc Thoai et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts

Jasgurpreet Singh Chohan et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Experimental investigation of wear of multiwalled carbon nanotube particles-filled poly-ether-ether-ketone matrix composites under dry sliding

D. Kumar et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Taguchi's methodology of optimizing turning parameters over chip thickness ratio in machining P/M AMMC

T. Tamizharasan et al.

SN APPLIED SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

detasFLEX - A computational design tool for the analysis of various notch flexure hinges based on non-linear modeling

Stefan Henning et al.

MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Instruments & Instrumentation

Calibration and uncertainty analysis for multicomponent force/torque measurements

Jan Schleichert et al.

TM-TECHNISCHES MESSEN (2017)

添加到收藏夹

Article Engineering, Mechanical

Optimisation of machining and geometrical parameters in turning process using Taguchi method

N. Senthilkumar et al.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Thin Beams in Compliant Mechanisms

Aimei Zhang et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2013)

添加到收藏夹

Article Materials Science, Composites

Multi-criteria Optimization Using Taguchi and Grey Relational Analysis in CNC Turning of PEEK CF30

Francisco Mata Cabrera et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)

添加到收藏夹

Proceedings Paper Computer Science, Interdisciplinary Applications

Impact of Interface temperature over Flank wear in Hard Turning using Carbide inserts

N. Senthil Kumar et al.

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)

添加到收藏夹

Article Automation & Control Systems

Design and fabrication of miniature compliant hinges for multi-material compliant mechanisms

Wojciech Bejgerowski et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Article Automation & Control Systems

Manufacturing of multi-material compliant mechanisms using multi-material molding

Regina M. Gouker et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Mechanical

Compliant floating-opposing-arm (FOA) centrifugal clutch

NB Crane et al.

JOURNAL OF MECHANICAL DESIGN (2004)

添加到收藏夹

Article Engineering, Mechanical

Design of symmetric conic-section flexure hinges based on closed-form compliance equations

N Lobontiu et al.

MECHANISM AND MACHINE THEORY (2002)

添加到收藏夹

Article Engineering, Mechanical

Synthesis of planar, compliant four-bar mechanisms for compliant-segment motion generation

L Saggere et al.

JOURNAL OF MECHANICAL DESIGN (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.