☆ 4.4 Article

Multiphysics modeling of metal based additive manufacturing processes with focus on thermomechanical conditions

JOURNAL OF THERMAL STRESSES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Temperature-dependent modified inherent strain method for predicting residual stress and distortion of Ti6Al4V walls manufactured by wire-arc directed energy deposition

Wen Dong et al.

Summary: As an AM process, wire-arc DED is known for printing large metal parts. However, heat accumulation during deposition can lead to residual stress and distortion. This study extends the use of the MIS method to wire-arc DED and introduces a temperature-dependent approach to improve accuracy. Experimental validation shows that the new method significantly reduces prediction errors for stress and distortion in large-scale parts.

ADDITIVE MANUFACTURING (2023)

添加到收藏夹

Article Optics

Determining the laser absorptivity of Ti-6Al-4V during laser powder bed fusion by calibrated melt pool simulation

Peter S. Cook et al.

Summary: Additive manufacturing processes such as LPBF are widely used in medical and aerospace industries. Simulation and understanding of LPBF process can improve prediction and control of part properties, however, there is limited data available for laser absorptivity in actual operating conditions. This study determined the in-situ laser absorptivity of Ti-6Al-4V alloy during LPBF and discussed the physical mechanisms responsible for changes in absorption behavior at high laser energy density.

OPTICS AND LASER TECHNOLOGY (2023)

添加到收藏夹

Article Mechanics

Anisotropic yield surfaces of additively manufactured metals simulated with crystal plasticity

K. Somlo et al.

Summary: The mechanical anisotropy created by additive manufacturing (AM) is investigated through crystal plasticity simulations, using periodic representative volume elements specific to each material and calibrated against tensile tests.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)

添加到收藏夹

Review Environmental Sciences

Additive manufacturing for sustainability: A systematic literature review

Leonardo Agnusdei et al.

Summary: This review examines the role of Additive Manufacturing (AM) technology in fostering sustainability. Through bibliometric, network, and meta-analyses, the study identifies the strong research impact of holistic approaches towards AM sustainability.

SUSTAINABLE FUTURES (2022)

添加到收藏夹

Article Thermodynamics

A fundamental investigation of thermo-capillarity in laser powder bed fusion of metals and alloys

Mohamad Bayat et al.

Summary: This study utilizes a multi-physics numerical model to investigate the effects of thermo-capillarity on the melt pool morphology and thermal fluid conditions during the Laser Powder Bed Fusion process. The results demonstrate that higher Marangoni numbers lead to decreased temperature gradients and more uniform temperature fields in the melt pool. Additionally, a novel methodology is introduced for calculating the melt pool's average Nusselt number, which can be used to simplify heat conduction simulations with effective liquid conductivity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Manufacturing

Thermo-mechanical modelling of stress relief heat treatments after laser-based powder bed fusion

David De Baere et al.

Summary: This study investigates the effect of stress relief heat treatment in laser-based powder bed fusion post-processing, modeling the impact of post-processing parameters on residual stress. The results show that heat treatment can alleviate residual stress in parts, allowing for the selection of optimal heat treatment conditions based on simulation results and reducing the need for extensive experimentation.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Review Engineering, Manufacturing

A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies

Mohamad Bayat et al.

Summary: Numerical simulations have shown potential for predicting the quality of components produced by metal additive manufacturing processes. Advanced techniques can predict defect occurrence and optimize processing parameters. Research focuses on different length scales, physics models, and thermo-mechanical behavior modeling strategies.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

A computationally efficient thermo-mechanical model for wire arc additive manufacturing

Yabin Yang et al.

Summary: A semi-analytical thermal model was developed to accurately predict the thermally induced residual stresses and distortions in wire arc additive manufacturing. The simulations showed high accuracy of the proposed model and sensitivity of part distortions to boundary conditions.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

A new procedure for implementing the modified inherent strain method with improved accuracy in predicting both residual stress and deformation for laser powder bed fusion

Wen Dong et al.

Summary: Laser powder bed fusion (L-PBF) is widely used in metal additive manufacturing to create parts with complex geometries, but the fast and intense laser scanning process can lead to significant residual deformation and stress. A modified inherent strain (MIS) method has been developed to accurately simulate residual deformation, but the current implementation procedure may result in inaccurate residual stress prediction. A new implementation procedure is proposed to improve the accuracy of residual stress simulation without compromising residual deformation prediction. By incorporating mechanical properties at elevated temperature into the part-scale layer-by-layer finite element model, the new procedure enhances the accuracy of predicting residual stress and deformation in L-PBF metal parts.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

An improved distortion compensation approach for additive manufacturing using optically scanned data

Shukri Afazov et al.

Summary: An improved mathematical model for calculating distortion vectors of two aligned surface meshes has been proposed, showing better accuracy and applicability in industrial component manufacturing. The model has successfully reduced distortion in industrial components, demonstrating potential for wider use in additive manufacturing processes.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

添加到收藏夹

Review Engineering, Manufacturing

Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: A review

Jinghao Li et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Part-scale thermo-mechanical modelling of distortions in Laser Powder Bed Fusion - Analysis of the sequential flash heating method with experimental validation

Mohamad Bayat et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components

Xuan Liang et al.

COMPUTATIONAL MECHANICS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V

R. K. Ganeriwala et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation

Mohamad Bayat et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Additive Manufacturing: New Trends in the 4th Industrial Revolution

Luigi M. Galantucci et al.

PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON THE INDUSTRY 4.0 MODEL FOR ADVANCED MANUFACTURING (AMP 2019) (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional modeling of the microstructure evolution during metal additive manufacturing

O. Zinovieva et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Article Engineering, Manufacturing

A modified method for estimating inherent strains from detailed process simulation for fast residual distortion prediction of single-walled structures fabricated by directed energy deposition

Xuan Liang et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An additive manufacturing filter for topology optimization of print-ready designs

Matthijs Langelaar

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)

添加到收藏夹

Article Engineering, Manufacturing

Numerical modelling and experimental validation in Selective Laser Melting

Michele Chiumenti et al.

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method

A. Zinoviev et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Manufacturing

Effect of stress relaxation on distortion in additive manufacturing process modeling

Erik R. Denlinger et al.

ADDITIVE MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Experimental comparison of residual stresses for a thermomechanical model for the simulation of selective laser melting

N. E. Hodge et al.

ADDITIVE MANUFACTURING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of the micro structural evolution during selective laser melting of Ti-6Al-4V

Lore Thijs et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Review Thermodynamics

Finite element modeling and simulation of welding part 1: Increased complexity

LE Lindgren

JOURNAL OF THERMAL STRESSES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.