☆ 4.7 Article

Application of nanofluids in heat pipes

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

The effects of particle mass fraction and static magnetic field on the thermal performance of NiFe2O4 nanofluid in a heat pipe

Duygu Yilmaz Aydin et al.

Summary: This study experimentally investigated the thermal performance of NiFe2O4 nanoparticles in a thermosyphon-type heat pipe. The results showed that increasing the mass fraction of nanoparticles and applying a low parallel magnetic field significantly improved the heat transfer performance of the heat pipe.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

添加到收藏夹

Article Thermodynamics

Experimental investigation of heat transfer performance of Al2O3 nanofluids in a compact plate heat exchanger

Wagd Ajeeb et al.

Summary: This study investigates the performance of a compact gasketed plate heat exchanger using Al2O3 nanofluids. The experiment measured the thermophysical properties of the nanofluid samples and compared their performance with conventional heat transfer fluids. The results showed that increasing the concentration of nanoparticles improved heat transfer efficiency and energy efficiency.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Review Thermodynamics

Recent advances in visualization of pulsating heat pipes: A review

Zipei Su et al.

Summary: Due to its simple structure and excellent heat transfer performance, pulsating heat pipe (PHP) is widely used in different heat management fields. The complex heat transfer mechanism and various influencing factors make it difficult to predict the heat transfer performance of PHP. Therefore, a large number of visualization researches have been conducted to further improve the heat transfer mechanism and theory of PHP. This paper provides an overview of the latest progress in PHP visualization and summarizes and prospects the visualization studies of PHP with different visualization techniques, operating conditions, structural parameters, and working fluids, providing a reference for future visualization research.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Heat transfer and flow characteristic of a flat confined loop thermosyphon with ternary hybrid nanofluids for electronic devices cooling

Xianling Wang et al.

Summary: The purpose of this study was to investigate the feasibility of using ternary hybrid nanofluids in heat pipes and their effect on the operation performance of flat confined loop thermosiphon (FCLTS). Al2O3:Cu:TiO2 ternary hybrid nanofluids with different mixing ratios and concentrations were prepared. The synergistic effect of thermal conductivity enhancement was analyzed and the optimal mixing ratio of 4:2:4 was obtained. The thermal performance of an FCLTS with Al2O3:Cu:TiO2 nanofluids was investigated, revealing the improved wettability of the upper surface and the optimal conditions for enhanced heat transfer.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Review Thermodynamics

Heat pipes in battery thermal management systems for electric vehicles: A critical review

Marco Bernagozzi et al.

Summary: Electric vehicles are seen as a potential solution for reducing greenhouse gas emissions and addressing global warming. Battery thermal management is critical for the performance and sustainability of electric vehicles. Current technologies for battery thermal management in commercial vehicles include air and liquid cooling. This review focuses on the potential use of passive thermal devices called heat pipes for battery thermal management, analyzing different types of heat pipes and methods for removing excess heat. The review aims to collect research results, identify strengths and weaknesses, and propose future research directions for heat pipe battery thermal management systems.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Performance of two-phase loop thermosiphon with graphene nanofluid

Yogesh Fulpagare et al.

Summary: In this research, thermal resistance of a modified inflated aluminium plate with a closed thermosiphon under natural convection was tested, finding that a 70% filling ratio offers the best heat transfer performance. As the power increases, the thermal resistance decreases, and uniform heat source performs better than non-uniform heat source.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Heat transfer and flow visualization of pulsating heat pipe with silica nanofluid: An experimental study

Dongwei Zhang et al.

Summary: Adding nanoparticles in PHP can promote phase transition and increase fluid velocity and driving force, benefiting liquid reflux and avoiding 'dry out'. There is an optimum concentration of dispersed nanoparticles (1.0 wt%) in base fluid for enhancing heat transfer efficiency, reaching up to 40.1% at 50 W heating power.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Energy & Fuels

Experimental investigation into efficiency of SiO2/water-based nanofluids in photovoltaic thermal systems using response surface methodology

Kadir Gelis et al.

Summary: This study investigated the impact of nanofluids on the electrical and thermal efficiency of photovoltaic thermal systems (PVT) using the Response Surface Methodology (RSM). The experimental results showed that the flow rate, nanofluid volumetric concentration, and solar radiation were the most influential parameters affecting the thermal and electrical efficiency. The mathematical models developed based on the experimental outcomes successfully verified the performance of the PVT system in terms of electrical and thermal efficiencies.

SOLAR ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Solar water-pump thermal analysis utilizing copper-gold/engine oil hybrid nanofluid flowing in parabolic trough solar collector: Thermal case study

Mohamed Ouni et al.

Summary: Solar energy is a significant thermal energy source used in various technologies such as solar water pumps and photovoltaic cells. Examining solar radiation technology is crucial for optimizing the performance of solar water pumps. The use of hybrid nanofluids with parabolic trough surface collectors has been developed to enhance heat transmission efficiency in solar water pumps.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Combined effect of thermal and hydraulic performance of different nanofluids on their cooling efficiency in microchannel heat sink

Fahad S. Alkasmoul et al.

Summary: This study evaluates the thermal and hydraulic performance of different nanofluids in a microchannel heat sink and finds that nanofluids can enhance its thermal performance. However, considering the flow rate and pumping power, the use of nanofluids deteriorates the heat dissipation efficiency of the heat sink, resulting in no beneficial aspects in terms of thermal performance and energy cost.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Experimental evaluation on heat transfer limits of sodium heat pipe with screen mesh for nuclear reactor system

Zhixing Tian et al.

Summary: This study investigates the heat transfer limits of heat pipes and evaluates the corresponding models. The experimental results provide references for heat pipe design and estimate the accuracy of the existing models.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Stability and thermal conductivity of TiO2/water nanofluids: A comparison of the effects of surfactants and surface modification

Hao Zhang et al.

Summary: In this study, gamma-glycidoxypropyltrimethoxysilane (GPTMS) modified TiO2/water nanofluids were prepared using surface modification technique. The characteristics of the modified nanoparticles were investigated, showing that the grafting efficiency of GPTMS increased with reaction temperature and reactant mass ratio. The stability and thermal conductivity of the prepared nanofluids were investigated, indicating that the GPTMS modified nanofluids exhibited excellent stability and higher thermal conductivity.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Thermodynamics

Numerical investigation of aqueous graphene nanofluid ice slurry passing through a horizontal circular pipe: Heat transfer and fluid flow characteristics

Yuguo Gao et al.

Summary: In this study, the thermal transport characteristics of a water-based graphene nanofluid ice slurry in turbulent flow in a horizontal circular straight pipe are simulated and described. The findings show that the uniformity of the crystal size distribution improves with an increase of velocity and ice packing factor.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation and application of stability and thermal characteristics of SiO2-ethylene-glycol/water nanofluids

Jingtao Dong et al.

Summary: A SiO2-ethylene-glycol/deionized water nanofluids with excellent static storage and dynamic stability was prepared and its thermophysical properties, heat transfer efficiency, and corrosion resistance were studied. The experimental results show that this nanofluids have a stable storage period and good heat transfer performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Review Energy & Fuels

A review on applications and techniques of improving the performance of heat pipe-solar collector systems

Mohammed J. Alshukri et al.

Summary: This research paper provides a comprehensive review of recent advances in heat pipe-evacuated tube solar collectors, covering enhancement techniques, structure design, modification methods, effects of integration of CPCs, types of working fluids, and the use of storage systems. It offers useful conclusions and recommendations to guide readers in producing future papers on heat pipe-solar collector systems.

SOLAR ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Battery thermal management systems based on nanofluids for electric vehicles

Mohammad Ali Abdelkareem et al.

Summary: This article addresses the crucial issue of the continuous rapid growth of the world population and the need for ambitious innovations like electric vehicles (EVs) to reduce carbon emissions in the transportation sector. The control of the working temperature in lithium-ion batteries (LIBs) for EVs is emphasized as a critical concern. Various cooling methods, including those utilizing nanofluids, are reviewed for battery pack thermal management. The combination of nanofluids with phase change materials (PCMs) and heat pipes (HPs) for battery thermal management systems (BTMSs) is also discussed. It is found that nanofluids effectively improve the thermal management of batteries, and hybrid cooling systems based on nanofluids outperform single BTMSs in terms of temperature uniformity. Additionally, the article highlights the need for further research to enhance the technology and advancements of EVs.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Investigation of the effect of hybrid CuO-Cu/water nanofluid on the solar thermal energy storage system

Z. A. Alrowaili et al.

Summary: The hybrid nanofluid, formed by using multiple types of nanoparticles in the preparation process, has shown potential in improving the performance and thermal-optical efficiency of solar thermal energy systems. Its stability and higher thermal conductivity make it a suitable working fluid for evacuated tube solar collectors.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

An integrated solar desalination with evacuated tube heat pipe solar collector and new wind ventilator external condenser

Shahin Shoeibi et al.

Summary: This study improved the performance of solar desalination by using an evacuated tube heat pipe solar collector and an external condenser. The results showed that the freshwater generation of the modified system was 2.13 times that of conventional systems, and the yield fraction of the external condenser was about 18.62% of the total water productivity. Additionally, the system contributed to significant carbon dioxide mitigation.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic behavior of alumina/silica hybrid nanofluids through a straight minichannel heat sink

Asif Khan et al.

Summary: The hydraulic and thermal performances of alumina-silica/water hybrid nanofluid in a minichannel heat sink are experimentally investigated. The hybrid nanofluid enhances heat transfer and pressure drop, with heating power having a significant effect on the performance.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Experimental study on heat transfer properties of gravity heat pipes in single/hybrid nanofluids and inclination angles

Zhaoxiao Wang et al.

Summary: This paper investigates the thermal conductivity performance of different nanofluids in a gravity heat pipe at different inclination angles, and finds that the hybrid nanofluid with the same mass fraction can enhance heat transfer efficiency compared to a single nanofluid.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Comparative performance analysis of internal combustion engine water jacket coolant using a mix of Al2O3 and CuO-based nanofluid and ethylene glycol

Luiz Otavio Ferrao Teixeira Alves et al.

Summary: In this study, a comparative analysis of engine coolant type was conducted using a conjugate heat transfer simulation. The addition of Al2O3 and CuO nanoparticles improved the cooling capacity but had a negative effect on the flow velocity.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Experimental Investigation of Aluminum Oxide Nanofluid on Closed Loop Pulsating Heat Pipe Performance

P. Venkataramana et al.

Summary: This paper discusses experimental studies conducted on a single closed loop pulsating heat pipe (CLPHP) to evaluate its thermal performance. The use of aluminium oxide nanoparticles in the working fluid improves the thermal conductivity of the heat pipe.

JOURNAL OF APPLIED FLUID MECHANICS (2022)

添加到收藏夹

Article Thermodynamics

Effects of 25 kHz ultrasound from single and double transducers on thermal and friction characteristics of laminar flows in water or water-based Al2O3 nanofluids

Wannarat Rakpakdee et al.

Summary: The experimental study investigated the heat transfer and flow resistance in a rectangular duct using compound techniques of 25 kHz ultrasound and Al2O3-water nanofluid. The results showed that adding Al2O3 nanoparticles increased flow resistance, while using ultrasound could reduce surface temperature and enhance local Nusselt number.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Chemical

Enhancement of Heat Transfer Performance of a Heat Pipe by Using Calcium Magnesium Carbonate-Ethylene Glycol/Water Nanofluid with Sodium Dodecylbenzene Sulfonate

Duygu Yilmaz Aydin et al.

Summary: This paper experimentally studied the effect of using CaMg(CO3)2/Ethylene Glycol-water as a working fluid on the thermal performance of thermosyphon heat pipe. The results showed that CaMg(CO3)2 nanofluid can reduce the average wall temperature of the heat pipe, improve heat transfer efficiency, and reduce thermal resistance.

PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Thermal management systems based on heat pipes for batteries in EVs/HEVs

Mohammad Ali Abdelkareem et al.

Summary: This study discusses the importance and research progress of using heat pipes for thermal management systems in electric vehicles/hybrid electric vehicles. Heat pipe technology is considered an efficient solution for reducing the temperature and achieving uniform temperature distribution in lithium-ion batteries. Additionally, combining nanofluids and phase change materials further improves the uniformity of temperature distribution.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Review Engineering, Chemical

A comprehensive review on performance improvement of solar desalination with applications of heat pipes

Shahin Shoeibi et al.

Summary: Solar desalination is an important method to convert brackish water to freshwater, but it has low water production rate. Active methods such as heat pipes and pulsating heat pipes can be used to enhance the productivity of solar desalination. This study reviews the performance of solar desalination systems with heat pipes and pulsating heat pipes, compares the working fluids in different configurations, and presents an economic analysis for cost-effective designs.

DESALINATION (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study on Sintered Wick Heat Pipe (SWHP) with CuO Nanofluids under Different Orientation

P. Manoj Kumar et al.

Summary: This study investigates the performance of a cylindrical-shaped sintered wick heat pipe in different orientations using numerical analysis. The results are validated with experimental findings. The use of a nanofluid as a working fluid, specifically one with a 1.0% weight fraction of CuO nanoparticles, is found to enhance the thermal performance of the heat pipe. The addition of CuO nanoparticles also reduces the pressure drop in the heat pipe.

JOURNAL OF NANOMATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Current Trends in Wick Structure Construction in Loop Heat Pipes Applications: A Review

Pawel Szymanski et al.

Summary: This article summarizes the advancements in the design and fabrication of wick structures in loop heat pipes (LHPs) and highlights the potential of composites and additively manufactured wicks in improving the heat transfer coefficient.

MATERIALS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Heat pipe integrated solar thermal systems and applications: A review

Pawan Chilbule et al.

Summary: Heat pipe is a passive technique for heat conduction with high efficiency and broad applications, especially in low and medium temperature heat applications. This study focuses on the construction and thermal performances of heat pipe integrated solar thermal applications, including water heating, air/space heating, water desalination, and solar cooking systems.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Thermodynamics

Proposal, transient model, and experimental verification of loop heat pipe as heating device for electric-vehicle batteries

Masakazu Hashimoto et al.

Summary: This paper reports the design, fabrication, and experimental results of using a loop heat pipe (LHP) as a heating device for batteries of electric vehicles. A new transient analytical model was constructed and compared with test results. The experimental results showed that the LHP can be used as a heating device under actual low-temperature conditions.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A recent examination on the performance of heat pipes in nanofluids in enhancing the thermodynamic properties

Kanhaiya Kumar Jha et al.

Summary: The rise in energy demand has motivated researchers to explore real-time solutions for enhancing heat transferring equipment. This includes the use of nanofluids to improve heat transfer efficiency. This review article discusses the application of nanofluids in heat pipes, providing valuable insights for researchers interested in the use of nanoparticles in heat pipe technology.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Review Thermodynamics

A descriptive review of the thermal transport mechanisms in mono and hybrid nanofluid-filled heat pipes and current developments

Harshit Pandey et al.

Summary: This review paper summarizes the studies on nanofluid-filled heat pipes in the last five years, focusing on the enhancement of thermal performance using mono and hybrid nanofluids. The analysis identifies the thermal transport mechanisms responsible for the changes in heat pipe performance and discusses the interrelationships. Additionally, various operating and design parameters that affect the thermal performance of the heat pipes are summarized.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

添加到收藏夹

Article Thermodynamics

Experimental study on confinement effect of two-phase closed thermosyphon and heat transfer enhancement using cellulose nanofluid

Dongnyeok Choi et al.

Summary: This study investigated the confinement effect on the boiling regime in a two-phase closed thermosyphon and the heat transfer enhancement using cellulose nanofiber fluid as the working fluid. Results showed that cellulose nanofiber fluid significantly improved critical heat flux and boiling heat transfer coefficient compared to water, without aggregation and sedimentation issues.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Upshot of melting heat transfer in a Von Karman rotating flow of gold-silver/engine oil hybrid nanofluid with Cattaneo-Christov heat flux

Yan Zhang et al.

Summary: This study numerically analyzes the three-dimensional flow and heat transfer characteristics of hybrid nanofluid on a rotating disk, finding that the hybrid nanofluid outperforms the nanofluid in terms of velocity and heat transfer.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Experimental studies on evaporation kinetics of gold nanofluid droplets: Influence of nanoparticle sizes and coating on thermal performance

Ibrahim Zaaroura et al.

Summary: This study investigates the evaporation of gold nanofluid droplets on a heated silicon substrate, analyzing the size effect of gold nanoparticles and the impact of surface coating on heat transfer. The research uses optical, infrared thermography, and acoustic methods to study the evaporation process and reveals that the addition of a surfactant decreases the effectiveness of heat transfer in gold nanofluids.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

An experimental investigation on a portable bubble basin humidification/dehumidification desalination unit utilizing a closed-loop pulsating heat pipe

Latif Aref et al.

Summary: This study aims to improve the performance of a solar energy-driven HDH desalination system by using a closed-loop pulsating heat pipe (CLPHP) in combination with a bubble basin. The experimental results show that the bubble basin type has a higher yield compared to the bubble column type, and increasing radiation and air mass flow rate can enhance productivity. The maximum yield achieved by the proposed system is 8.7 L/(day.m(2)).

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance evaluation of the heat pipe by using 1-pyrene carboxylic-acid functionalized graphene nanofluid

A. Esmaeilzadeh et al.

Summary: The experiments investigated the heat transfer characteristics in a sintered wick heat pipe using stable aqueous dispersions of 1-pyrene carboxylic acid (PCA)-functionalized graphene nanofluid. Results showed that thermal conductivity enhancement of nanofluids ranged from 21% to 40% with increasing concentration and temperature. The tilt angle of the heat pipe was found to have a substantial impact on the thermal properties, enhancing thermal performance by 79%. The use of nanofluids reduced heat pipe thermal resistance, with the most significant enhancement in overall heat transfer coefficient achieved at 0.06 mass% by 13.9 kW/K.m(2).

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Thermodynamics

Thermal performances and characteristics of thermosyphon heat pipe using alumina nanofluids

Loula A. Shuoman et al.

Summary: The thermal performance of a double tube two-phase closed thermosyphon using alumina nanofluid as working fluid was experimentally and theoretically evaluated under various operating conditions. The results show that a 2% volume fraction of alumina nanofluid yields the highest thermal performance at a heat load of 1000W. The study also compared the theoretical model with experimental results in different modes of operation.

HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Engineering, Chemical

The use of nanofluids in thermosyphon heat pipe: A comprehensive review

Hamid Ghorabaee et al.

Summary: The study aims to analyze the impact of nanofluids on the thermal characteristics of thermosyphon heat pipes, finding that nanofluids can significantly reduce thermal resistance and improve thermal efficiency. Research shows that the thermal performance of THP is closely related to operating variables, nanoparticle types, and heat inputs.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Review Energy & Fuels

A holistic review on the integration of heat pipes in solar thermal and photovoltaic systems

Ramalingam Senthil et al.

Summary: This study discusses the design and integration of heat pipes with various solar applications, highlighting the influencing factors on the thermal performance of heat pipe integrated solar energy systems and the future prospects of heat pipe systems.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

The effect of some metal oxide nanocomposites on the pulsating heat pipe performance

Seyed Masoud Hashemi et al.

Summary: This study investigated the impact of three different nanofluids on the performance of pulsating heat pipes, finding that the use of nanofluids can increase heat transfer efficiency and reduce thermal resistance. Among the nanofluids used, the nanocomposites with a concentration of 0.25 g/L showed the best performance.

ENERGY REPORTS (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance of GO-MoS2/ engine oil as Maxwell hybrid nanofluid flow with heat transfer in oscillating vertical cylinder

Muhammad Arif et al.

Summary: The study investigates the enhancement of heat transfer rate using engine oil with molybdenum disulphide and graphene oxide hybrid nano-composites. Through numerical methods and graphs, the effects of hybrid nanofluid on heat transfer are demonstrated, showing superior performance compared to single nanofluid. The results indicate a 23.17% increase in heat transfer rate with the use of the Maxwell hybrid nanofluid.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Enhancement of start-up and thermal performance in pulsating heat pipe with GO/water nanofluid

Yi Zhou et al.

Summary: Graphene Oxide (GO) nanofluid and filling ratio significantly impact the start-up performance of a water-based PHP. Adding 0.05 wt% GO nanoparticles at filling ratios of 20% and 50% can improve the start-up performance.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Optimizing the performance of the air conditioning system using an innovative heat pipe heat exchanger

Adel A. Eidan et al.

Summary: This study verifies the thermal performance of a window-type air-conditioning system equipped with an innovative type of heat-pipe heat exchanger, which leads to a reduction in power consumption by the compressor and an increase in system efficiency measured by the coefficient of performance. By using different working fluids and filling ratios, energy-saving and refrigeration enhancement effects can be achieved.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article

Experimental and theoretical investigation of heat transfer characteristics of cylindrical heat pipe using Al2O3–SiO2/W-EG hybrid nanofluids by RSM modeling approach

R. Vidhya et al.

Journal of Engineering and Applied Science (2021)

添加到收藏夹

Article Thermodynamics

Performance evaluation of hybrid oscillating heat pipe with carbon nanotube nanofluids for electric vehicle battery cooling

Zhicheng Zhou et al.

Summary: This study developed a hybrid oscillating heat pipe using CNT nanofluids for cooling electric vehicle batteries, demonstrating improved heat transfer performance and reduced battery pack temperature.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

The impacts of utilizing nano-encapsulated PCM along with RGO nanosheets in a pulsating heat pipe, a comparative study

Omid Mohammadi et al.

Summary: Utilizing nano-encapsulated phase change material, reduced graphene oxide nanosheets, and their mixture as the working fluid in a pulsating heat pipe can effectively enhance its performance. Nanosheets have a greater impact on the performance of the pulsating heat pipe compared to nano-encapsulated phase change material. Using either nano-encapsulated phase change material or nanosheets alone can improve the performance of the PHP, with nanosheets demonstrating better performance due to their higher thermal conductivity and better mixing with the fluid containing them than pure water.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Computer Science, Hardware & Architecture

An experimental inquisition of waste heat recovery in electronic component system using concentric tube heat pipe heat exchanger with different working fluids under gravity assistance

P. Ramkumar et al.

Summary: This study presents the design, fabrication, and experimental investigation of utilizing waste heat in electronic components through a heat pipe heat exchanger. By varying parameters such as inclination angles, mass flow rates, and temperatures, it was found that the optimal performance was achieved at a 60-degree inclination angle. Furthermore, acetone as a working fluid demonstrated better performance compared to methanol in terms of effectiveness, heat transfer coefficient, heat transfer rate, Reynold's number, and thermal resistance.

MICROPROCESSORS AND MICROSYSTEMS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental and transient thermal analysis of screen mesh wick heat pipe

B. Ch Nookaraju et al.

Summary: The transient thermal analysis of a screen mesh wick heat pipe was conducted using de-ionized water as working fluid with screen mesh numbers 60 and 100. The study revealed that the thermal resistance decreases with increasing heat input, while the heat transfer coefficient values were higher in the thermal analysis compared to the experimental results due to lower heat loss in ANSYS software. The maximum heat transfer coefficient was found at 60W of heat input.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Thermodynamics

Effect of various parameters on heat transport capability of axially grooved heat pipes

A. R. Anand

Summary: This paper provides a comprehensive overview of the impact of various parameters on the heat transport capability of Axially grooved heat pipes (AGHPs) in space missions. Factors such as type of working fluid, sink characteristics, operating temperature are discussed based on both theory and experiments. Consideration of these parameters is essential in designing thermal control systems (TCS) for spacecraft and landing missions.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Performance analysis of thermosyphon heat pipe using aluminum oxide nanofluid under various angles of inclination

Arun Kurien Reji et al.

Summary: Heat pipes are devices that transfer heat using the principles of evaporation and condensation, with thermosyphon heat pipes relying on gravity to transport condensate back to the evaporator. While conventional fluids are typically used in heat pipes, nanofluids can enhance heat transfer rates due to their enriched thermal properties. Experimental results show a 41% increase in performance when using nanofluids compared to distilled water, with a peak efficiency of 88% at a 60-degree inclination angle.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Experimental study of the effect of single walled carbon nanotube/water nanofluid on the performance of a two-phase closed thermosyphon

Mohammad Chehrazi et al.

Summary: This study investigated the effect of single-walled carbon nanotube nanofluid on the heat transfer efficiency in a two-phase closed thermosyphon, finding that increasing the concentration of nanofluid and input power can enhance system performance and reduce thermal resistance.

JOURNAL OF THE SERBIAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Investigation on thermophysical properties and heat transfer performance of heat pipe charged with binary mixture based ZnO-MgO hybrid nanofluids

R. Vidhya et al.

Summary: Hybrid nanofluids with enhanced thermophysical properties were prepared by synthesizing zinc oxide and magnesium oxide nanoparticles, converting them into nanofluids, and analyzing their heat transfer characteristics. The hybrid nanofluids showed improved thermal conductivity and heat transfer coefficient, making them suitable for heat transfer applications in heat exchanging devices.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Thermodynamics

Influence of the geometrical parameters and particle concentration levels of hybrid nanofluid on the thermal performance of axial grooved heat pipe

Naimish S. Pandya et al.

Summary: A numerical model was developed to analyze the thermal performance of AGHP with different volume concentrations of HNF at various operating temperatures, finding that HNF at 1.25% volume concentration achieved the highest heat transport capacity. Further investigation on the effects of geometrical parameters showed that AGHP could achieve optimal thermal performance at specific combinations of parameters.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance analysis of CuO/water nanofluid flow in a pipe with single and double strip helical screw tape

Shashank Ranjan Chaurasia et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Experimental study on a large scale pulsating heat pipe operating at high heat loads, different adiabatic lengths and various filling ratios of acetone, ethanol, and water

Cexary Czajkowski et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical and experimental investigations of hybrid nanofluids on pulsating heat pipe performance

M. Zufar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

A comparative investigation on the effect of different nanofluids on the thermal performance of two-phase closed thermosyphon

Qian Xu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Effect of a flow behavior on the thermal performance of closed-loop and closed-end pulsating heat pipes

Wookyoung Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Parametric study of rotating heat pipe performance: A review

Shuang-Fei Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

添加到收藏夹

Article Energy & Fuels

Heat-Transfer Characteristics of a Cryogenic Loop Heat Pipe for Space Applications

Jaehwan Lee et al.

ENERGIES (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the effect of nanofluids on the thermal resistance of a thermosiphon L-shape heat pipe at different angles

Ebrahim Khajehpour et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Multidisciplinary Sciences

On the Thermal Performance of a Fractal Microchannel Subjected to Water and Kerosene Carbon Nanotube Nanofluid

Zongjie Lyu et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Thermodynamics

Parametric study on the thermal performance enhancement of a thermosyphon heat pipe using covalent functionalized graphene nanofluids

Emad Sadeghinezhad et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Effectiveness of temperature-dependent properties of Au, Ag, Fe3O4, Cu nanoparticles in peristalsis of nanofluids

F. M. Abbasi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Experimental study on heat transfer performance of pulsating heat pipes with hybrid working fluids

Yanyan Xu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

An experimental investigation on thermal efficiency of two-phase closed thermosyphon (TPCT) filled with CuO/water nanofluid

Metin Kaya

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2020)

添加到收藏夹

Article Engineering, Chemical

Experimental measurements of thermal conductivity of engine oil-based hybrid and mono nanofluids with tungsten oxide (WO3) and MWCNTs inclusions

Farid Soltani et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Thermodynamics

Operation analysis, response and performance evaluation of a pulsating heat pipe for low temperature heat recovery

Zhixiong Li et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of the effect of using water and ethanol as working fluid on the performance of pyramid-shaped solar still integrated with heat pipe solar collector

Rasoul Fallahzadeh et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Thermal Performance and Numerical Simulation of the 1-Pyrene Carboxylic-Acid Functionalized Graphene Nanofluids in a Sintered Wick Heat Pipe

Alireza Esmaeilzadeh et al.

ENERGIES (2020)

添加到收藏夹

Article Energy & Fuels

Nanofluid-based pulsating heat pipe for thermal management of lithium-ion batteries for electric vehicles

Meng Chen et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Phase change material/heat pipe and Copper foam-based heat sinks for thermal management of electronic systems

Muhammad Aamer Hayat et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

EFFECTS OF CuO/WATER NANOFLUID APPLICATION ON THERMAL PERFORMANCE OF MESH WICK HEAT PIPE

Naveen Kumar Gupta et al.

HEAT TRANSFER RESEARCH (2020)

添加到收藏夹

Article Thermodynamics

Thermal management system with nanofluids for electric vehicle battery cooling modules

S. Wiriyasart et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of nanofluid stability on thermal performance and flow regimes in pulsating heat pipe

Ali Akbari et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Comparisons between heat pipe, thermoelectric system, and vapour compression refrigeration system for electronics cooling

Kun Liang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Simulation and experimental analysis of heat transfer characteristics in the plate type heat exchangers using TiO2/water nanofluid

Ataollah Khanlari et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

添加到收藏夹

Article Thermodynamics

Influence of graphene oxide nanofluids and surfactant on thermal behaviour of the thermosyphon

Agnieszka Wlazlak et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

A comparative study of flow regimes and thermal performance between flat plate pulsating heat pipe and capillary tube pulsating heat pipe

Anand Takawale et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Review Thermodynamics

A critical review of battery thermal performance and liquid based battery thermal management

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement in a loop thermosyphon using nanoparticles/water nanofluid

V. Kiseev et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Population balance for capillary limit modeling in a screen mesh wick heat pipe working with nanofluids

Bernardo Herrera et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Chemical

Improve the thermal performance of the pillow plate heat exchanger by using nanofluid: Numerical simulation

Mojtaba Shirzad et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study on enhancement of heat transfer characteristics of a heat pipe utilizing aqueous clinoptilolite nanofluid

Adnan Sozen et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Experimental Investigation on Thermal Performance of a PV/T-PCM (Photovoltaic/Thermal) System Cooling with a PCM and Nanofluid

M. M. Sarafraz et al.

ENERGIES (2019)

添加到收藏夹

Article Thermodynamics

Experimental study of transparent oscillating heat pipes filled with solar absorptive nanofluids

Haichuan Jin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Assessment of the thermal performance of a thermosyphon heat pipe using zirconia-acetone nanofluids

M. M. Sarafraz et al.

RENEWABLE ENERGY (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Current research aspects in mono and hybrid nanofluid based heat pipe technologies

Rakesh K. Bumataria et al.

HELIYON (2019)

添加到收藏夹

Article Thermodynamics

Application of the heat pipe to enhance the performance of the vapor compression refrigeration system

Santiphap Nakkaew et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

State of the Art of Heat Transfer of Heat Pipes and Thermosyphons Employing Nanofluids as Working Fluid

M. H. Buschmann et al.

JOURNAL OF NANOFLUIDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermal Enhancement Using Nanofluids on High Heat Dissipation Electronic Components

Roger R. Riehl

JOURNAL OF NANOFLUIDS (2019)

添加到收藏夹

Article Thermodynamics

Nucleate pool boiling heat transfer in wickless heat pipes (two-phase closed thermosyphons): A critical review of correlations

Valentin Guichet et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

添加到收藏夹

Article Computer Science, Information Systems

Thermal Characteristic and Analysis of Microchannel Structure Flat Plate Pulsating Heat Pipe With Silver Nanofluid

Hui Xu et al.

IEEE ACCESS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Role of graphene nanofluids on heat transfer enhancement in thermosyphon

Sidhartha Das et al.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2019)

添加到收藏夹

Article Thermodynamics

A COMPARATIVE STUDY OF THERMAL PERFORMANCE OF A HEAT PIPE USING WATER AND NANOFLUID, AND A NANOPARTICLE-COATED WICK HEAT PIPE USING WATER

Naveen Kumar Gupta et al.

HEAT TRANSFER RESEARCH (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance analysis of a flat heat pipe working with carbon nanotube-water nanofluid for cooling of a high heat flux heater

A. Arya et al.

HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Review Energy & Fuels

A review on pulsating heat pipes: From solar to cryogenic applications

Mohammad Alhuyi Nazari et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Effect of design and operating parameters on the thermal performance of aluminum flat grooved heat pipes

Hossein Alijani et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Heat transfer performance of flexible oscillating heat pipes for electric/hybrid-electric vehicle battery thermal management

Jian Qu et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

An efficient optimization and comparative analysis of ammonia and methanol heat pipe for satellite application

Vivek K. Patel

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Thermal performance of a heat sink microchannel working with biologically produced silver-water nanofluid: Experimental assessment

M. M. Sarafraz et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

添加到收藏夹

Article Thermodynamics

Experimental study of the thermal characteristics of a heat pipe

Mahboobe Mahdavi et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

添加到收藏夹

Article Thermodynamics

Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe

Mohammad Alhuyi Nazari et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Visualization experiments on flat-plate heat pipes with composite mesh-groove wick at different tilt angles

Shwin-Chung Wong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Experimental Study of Thermal Performance of Nanofluid-Filled and Nanoparticles-Coated Mesh Wick Heat Pipes

Naveen Kumar Gupta et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Chemical

Experimental investigation of the heat transfer performance of an oscillating heat pipe with graphene nanofluids

Yu Zhou et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

How to improve the thermal performance of pulsating heat pipes: A review on working fluid

Mohammad Alhuyi Nazari et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Application of nanofluid to improve the thermal performance of horizontal spiral coil utilized in solar ponds: Geometric study

Erfan Khodabandeh et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Effect of titanium dioxide/water nanofluid use on thermal performance of the flat plate solar collector

Faruk Kilic et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Engineering, Chemical

A study on heat transfer characteristics of inclined copper sintered wick heat pipe using surfactant free CuO and Al2O3 nanofluids

M. Vijayakumar et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

添加到收藏夹

Article Thermodynamics

On the convective thermal performance of a CPU cooler working with liquid gallium and CuO/water nanofluid: A comparative study

M. M. Sarafraz et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Thermal performance evaluation of a helically-micro-grooved heat pipe working with water and aqueous Al2O3 nanofluid at different inclination angle and filling ratio

Wael I. A. Aly et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Aerospace

Analytical study of multiple evaporator heat pipe with nanofluid; A smart material for satellite equipment cooling application

P. R. Mashaei et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

Thermal performance and friction factor of a cylindrical microchannel heat sink cooled by Cu-water nanofluid

Zoha Azizi et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the effect of graphene nanofluids on heat pipe thermal performance

Emad Sadeghinezhad et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Effect of nitrogen-doped graphene nanofluid on the thermal performance of the grooved copper heat pipe

Mohammad Mehrali et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Thermodynamics

Thermal characteristics studies on sintered wick heat pipe using CuO and Al2O3 nanofluids

M. Vijayakumar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

添加到收藏夹

Article Thermodynamics

Comparative study of the effect of hybrid nanoparticle on the thermal performance of cylindrical screen mesh heat pipe

R. Ramachandran et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Comparison of the thermal performances and flow characteristics between closed-loop and closed-end micro pulsating heat pipes

Soohwan Jun et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Effect of C60 nanofluid on the thermal performance of a flat-plate pulsating heat pipe

Qingping Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Effects of graphene oxide nanofluids on heat pipe performance and capillary limits

Kyung Mo Kim et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Chemical

Particle size and type effects on heat transfer enhancement of Ferro-nanofluids in a pulsating heat pipe

Hamid Reza Goshayeshi et al.

POWDER TECHNOLOGY (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermoeconomic analysis of thermosyphon heat pipes

Mustafa Ali Ersoz et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Engineering, Aerospace

Effect of nanofluid on thermal performance of heat pipe with two evaporators; application to satellite equipment cooling

P. R. Mashaei et al.

ACTA ASTRONAUTICA (2015)

添加到收藏夹

Article Thermodynamics

Improvement of heat transfer characteristics of cylindrical heat pipe by using SiC nanofluids

M. Ghanbarpour et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Understanding the self-sustained oscillating two-phase flow motion in a closed loop pulsating heat pipe

Giulia Spinato et al.

ENERGY (2015)

添加到收藏夹

Article Thermodynamics

Effect of magnetic field on the heat transfer rate of kerosene/Fe2O3 nanofluid in a copper oscillating heat pipe

H. R. Goshayeshi et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

添加到收藏夹

Article Thermodynamics

Thermal performance of screen mesh heat pipe with Al2O3 nanofluid

M. Ghanbarpour et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

添加到收藏夹

Article Mechanics

Performance analysis of cylindrical heat pipe using nanofluids - An experimental study

S. Venkatachalapathy et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Heat utilisation technologies: A critical review of heat pipes

C. W. Chan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Materials Used in Heat Pipe

Narendra N. Babu et al.

MATERIALS TODAY-PROCEEDINGS (2015)

添加到收藏夹

Article Thermodynamics

Effect of nanofluids on thermal performance of closed loop pulsating heat pipe

V. K. Karthikeyan et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

添加到收藏夹

Article Thermodynamics

Thermal performance and efficiency of a thermosyphon heat pipe working with a biologically ecofriendly nanofluid

M. M. Sarafraz et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Thermodynamics

Numerical analysis of a screen mesh wick heat pipe with Cu/water nanofluid

A. Brusly Solomon et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Thermodynamics

Experimental investigation on enhancement in thermal characteristics of sintered wick heat pipe using CuO nanofluids

G. Kumaresan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids

Mohammad Mehrali et al.

JOURNAL OF MATERIALS SCIENCE (2014)

添加到收藏夹

Article Thermodynamics

Thermal Performance of Automobile Radiator Using Carbon Nanotube-Water Nanofluid-Experimental Study

Sandesh S. Chougule et al.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2014)

添加到收藏夹

Article Engineering, Chemical

A novel integrated solar desalination system with a pulsating heat pipe

H. Kargar Sharif Abad et al.

DESALINATION (2013)

添加到收藏夹

Article Thermodynamics

Effect of functionalized MWCNTs/water nanofluids on thermal resistance and pressure fluctuation characteristics in oscillating heat pipe

Md. Riyad Tanshen et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Overall thermal performance of ferrofluidic open loop pulsating heat pipes: An experimental approach

Mehdi Taslimifar et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)

添加到收藏夹

Article Nuclear Science & Technology

Characteristics of Screen Mesh Wick Heat Pipe with Nanofluid as Passive Cooling System

W. N. Septiadi et al.

ATOM INDONESIA (2013)

添加到收藏夹

Review Thermodynamics

Review and Advances in Heat Pipe Science and Technology

Amir Faghri

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Thermodynamics

Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment

Nandy Putra et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2011)

添加到收藏夹

Article Thermodynamics

Experimental study of the thermal performance of thermosyphon heat pipe using iron oxide nanoparticles

Gabriela Huminic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

添加到收藏夹

Article Thermodynamics

Compositive effect of nanoparticle parameter on thermal performance of cylindrical micro-grooved heat pipe using nanofluids

Zhen-Hua Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)

添加到收藏夹

Article Thermodynamics

THERMAL CHARACTERISTICS OF GROOVED HEAT PIPE WITH HYBRID NANOFLUIDS

Woo-Sung Han et al.

THERMAL SCIENCE (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Application of silver nanofluid containing oleic acid surfactant in a thermosyphon economizer

Thanya Parametthanuwat et al.

NANOSCALE RESEARCH LETTERS (2011)

添加到收藏夹

Article Thermodynamics

Operation characteristics of cylindrical miniature grooved heat pipe using aqueous CuO nanofluids

Guo-Shan Wang et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

添加到收藏夹

Article Thermodynamics

Thermal performance of an oscillating heat pipe with Al2O3-water nanofluids

Jian Qu et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Effect of nanofluids on the thermal performance of a flat micro heat pipe with a rectangular grooved wick

Kyu Hyung Do et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Thermal performance of inclined grooved heat pipes using nanofluids

Zhen-Hua Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

Heat transfer performance of a horizontal micro-grooved heat pipe using CuO nanofluid

Xue Fei Yang et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)

添加到收藏夹

Article Thermodynamics

Experimental investigation of silver nano-fluid on heat pipe thermal performance

Shung-Wen Kang et al.

APPLIED THERMAL ENGINEERING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.