相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。An improved mesh stiffness calculation model for cracked helical gear pair with spatial crack propagation path
Siyu Wang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)
Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair
Lantao Yang et al.
ENGINEERING FAILURE ANALYSIS (2021)
A new calculation method for tooth fillet foundation stiffness of cracked spur gears
Lantao Yang et al.
ENGINEERING FAILURE ANALYSIS (2021)
Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations
Zaigang Chen et al.
MECHANISM AND MACHINE THEORY (2020)
Analytical models of mesh stiffness for cracked spur gears considering gear body deflection and dynamic simulation
Hanjun Jiang et al.
MECCANICA (2019)
Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths
Kangkang Chen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
An analytical-finite-element method for calculating mesh stiffness of spur gear pairs with complicated foundation and crack
Qibin Wang et al.
ENGINEERING FAILURE ANALYSIS (2018)
Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect
Chongyang Xie et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A revised time-varying mesh stiffness model of spur gear pairs with tooth modifications
Yanning Sun et al.
MECHANISM AND MACHINE THEORY (2018)
Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack
Zaigang Chen et al.
ENGINEERING FAILURE ANALYSIS (2017)
Meshing characteristics of spur gear pair under different crack types
Zhanwei Li et al.
ENGINEERING FAILURE ANALYSIS (2017)
Dynamic response and time-frequency analysis for gear tooth crack detection
Omar D. Mohammed et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
Research on the meshing stiffness and vibration response of fault gears under an angle-changing crack based on the universal equation of gear profile
Lingli Cui et al.
MECHANISM AND MACHINE THEORY (2016)
Improved time-varying mesh stiffness model of cracked spur gears
Hui Ma et al.
ENGINEERING FAILURE ANALYSIS (2015)
The effects of spur gear tooth spatial crack propagation on gear mesh stiffness
Wennian Yu et al.
ENGINEERING FAILURE ANALYSIS (2015)
Vibration signal modeling of a planetary gear set for tooth crack detection
Xihui Liang et al.
ENGINEERING FAILURE ANALYSIS (2015)
Research on the meshing stiffness and vibration response of cracked gears based on the universal equation of gear profile
Lingli Cui et al.
MECHANISM AND MACHINE THEORY (2015)
An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack
Zhiguo Wan et al.
ENGINEERING FAILURE ANALYSIS (2014)
Time-varying mesh stiffness calculation of cracked spur gears
Hui Ma et al.
ENGINEERING FAILURE ANALYSIS (2014)
Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set
Xihui Liang et al.
MECHANISM AND MACHINE THEORY (2014)
Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffness
Yogesh Pandya et al.
ENGINEERING FAILURE ANALYSIS (2013)
Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack
Yogesh Pandya et al.
ENGINEERING FAILURE ANALYSIS (2013)
Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness
Yogesh Pandya et al.
ENGINEERING FAILURE ANALYSIS (2013)
Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis
Omar D. Mohammed et al.
ENGINEERING FAILURE ANALYSIS (2013)
Dynamic simulation of planetary gear with tooth root crack in ring gear
Zaigang Chen et al.
ENGINEERING FAILURE ANALYSIS (2013)
Fault diagnosis of rotating machinery based on the statistical parameters of wavelet packet paving and a generic support vector regressive classifier
Changqing Shen et al.
MEASUREMENT (2013)
Vibration signal analysis for gear fault diagnosis with various crack progression scenarios
Omar D. Mohammed et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)
Dynamic Features of a Planetary Gear System With Tooth Crack Under Different Sizes and Inclination Angles
Zaigang Chen et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2013)
Research on the dynamic mechanism of the gear system with local crack and spalling failure
Rui Ma et al.
ENGINEERING FAILURE ANALYSIS (2012)
Time-Varying Meshing Stiffness Calculation and Vibration Analysis for a 16DOF Dynamic Model With Linear Crack Growth in a Pinion
Xiaojun Zhou et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2012)
Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth
Zaigang Chen et al.
ENGINEERING FAILURE ANALYSIS (2011)
Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness
Fakher Chaari et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)
Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission
Fakher Chaari et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)
Simulation of spur gear dynamics and estimation of fault growth
Siyan Wu et al.
JOURNAL OF SOUND AND VIBRATION (2008)
Fault diagnosis of rotating machinery based on multiple ANFIS combination with GAS
Yaguo Lei et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
Three-Dimensional Analyses by Finite Element Method of a Spur Gear: Effect of Cracks in the Teeth Foot on the Mesh Stiffness
S. Zouari et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2007)
Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations
SX Jia et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2006)
Contribution of gear body to tooth deflections - A new bidimensional analytical formula
P Sainsot et al.
JOURNAL OF MECHANICAL DESIGN (2004)
The dynamic modelling of a spur gear in mesh including friction and a crack
I Howard et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2001)