4.7 Article

One-pot synthesis of boron-doped cobalt oxide nanorod coupled with reduced graphene oxide for sodium ion batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Air-stabilized pore structure engineering of antimony-based anode by electrospinning for potassium ion batteries

Miaomiao Qian et al.

Summary: Finding suitable anode materials for potassium-ion batteries is a major challenge due to the slow reaction kinetics of potassium ions. This study presents the design of porous antimony-based nanofibers to enhance the electrochemical performance of potassium-ion batteries. The porous structure promotes electrolyte permeation and increases active sites, while the carbonaceous fiber skeleton facilitates fast ion transport. The resultant Sb2O3@PCN exhibits a stable discharge specific capacity and outperforms the N2-treated counterpart. This method offers a new approach for efficient potassium-ion battery electrode materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Article Chemistry, Inorganic & Nuclear

Boron-doping-induced defect engineering enables high performance of a graphene cathode for aluminum batteries

Yiqun Du et al.

Summary: The defect engineering of boron-doped reduced graphene oxide is applied to the cathode material for rechargeable aluminum batteries, improving capacity and reaction kinetics. The substitution of boron for carbon enhances electronic conductivity, reduces diffusion barrier, and increases AlCl4- adsorption ability. The cathode based on boron-doped reduced graphene oxide demonstrates high Al-storage capacity and outstanding long-term stability.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Nanoscience & Nanotechnology

Evolution of a Radially Aligned Microstructure in Boron-Doped Li[Ni0.95Co0.04Al0.01]O2 Cathode Particles

Ye Sung Kim et al.

Summary: This study introduces boron into the cathode of Li-[Ni0.95Co0.04Al0.01]O-2 (NCA95) to create a radially oriented microstructure with a strong crystallographic texture. The results show that the microstructure of the cathode has a significant impact on its cycling stability.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

Regulation of dual-ion batteries via the defects design in carbon electrode based on the different storage behaviors of PF6- and Li+

Meng-Meng Zhang et al.

Summary: Dual-ion batteries (DIBs) have attracted much attention due to their high energy density, low cost, and environmental friendliness. This study proposes a simple design to prepare cathode and anode materials for PF6- and Li+ intercalation, addressing the challenges of structural collapse and limited specific capacity. The DIB assembled with these materials exhibits excellent rate performance and energy density.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

One-step facile fabrication of N, S co-doped carbon modified NiS/MoS2 heterostructure microspheres with improved sodium storage performance

Kai Qin et al.

Summary: N, S co-doped carbon modified NiS/MoS2 heterostructures were successfully constructed via a one-step hydrothermal method, and demonstrated high reversible capacity, excellent rate capability, and long-term cycling stability as an advanced anode material for sodium ion batteries.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Heteroatom Doping-Induced Defected Co3O4 Electrode for High-Performance Lithium Oxygen Battery

Peng Zhang et al.

Summary: This study demonstrates that heteroatom doping is a feasible strategy to enhance the conductivity and catalytic activity of Co3O4 electrocatalyst. The optimized Co3O4 cathode with abundant oxygen vacancies accelerates the oxygen reduction/evolution reaction kinetics and suppresses parasitic reactions caused by LiO2.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Te-doping induced C@MoS2-xTex@C nanocomposites with improved electronic structure as high-performance anode for sodium-based dual-ion batteries

Jingui Zong et al.

Summary: Sodium-ion batteries and Sodium dual-ion batteries have received much attention due to their low cost, abundant sodium resources, and environmental friendliness. In this study, a new type of anode material was designed by Te atom doping and double carbon coating process, which significantly improved the performance and cyclic stability of sodium-ion batteries.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Insight to Se-doping effects on Fe7S8/carbon nanotubes composite as anode for sodium-ion batteries

Shuaiguo Zhang et al.

Summary: This study demonstrates the potential of selenium-doped iron-based sulfides in sodium-ion battery anodes through the synthesis and performance testing of carbon nanotube-modified selenium-doped Fe7S8 (Fe7S8-xSex/CNTs) materials.

JOURNAL OF POWER SOURCES (2022)

Article Engineering, Environmental

Oxygen vacancies engineered self-supported B doped Co3O4 nanowires as an efficient multifunctional catalyst for electrochemical water splitting and hydrolysis of sodium borohydride

Hefeng Yuan et al.

Summary: The development of earth abundant electrocatalysts is crucial for large-scale hydrogen production. This study introduces a self-supported VOB-Co3O4/NF nanowire array catalyst with trifunctional capabilities, exhibiting excellent stability, durability, and high current density for hydrogen and oxygen production reactions in alkaline media. Engineered boron and oxygen defects in the Co3O4 nanowires effectively modulate their electronic structure to enhance electrical conductivity and create numerous electroactive sites.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Ceramics

Ni-doped Co3O4 spheres decorated on CNTs nest-like conductive framework as efficiently stable hybrid anode for Na-ion batteries

Sidra Zawar et al.

Summary: The study reports a facile synthesis method to prepare Ni0.06Co2.94O4/CNTs hybrid with exceptional electrochemical performance, attributed to the conductive framework and layered structure formed. The Ni0.06Co2.94O4/CNTs electrode demonstrates outstanding cycling stability and rate performance, showing promising potential for practical applications in electrochemical energy storage devices.

CERAMICS INTERNATIONAL (2021)

Article Engineering, Environmental

Incorporating quantum-sized boron dots into 3D cross-linked rGO skeleton to enable the activity of boron anode for favorable lithium storage

Huiqi Wang et al.

Summary: The study introduces quantum-sized boron dots into a conductive graphene matrix to enhance the electrochemical activity of boron, resulting in high-capacity and stable lithium-ion battery anodes. The 3D cross-linked structure provides efficient pathways for ion insertion/extraction and enables remarkable electrochemical performance, inspiring further exploration in advanced anode materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Hollow Co3O4@N-doped carbon nanocrystals anchored on carbon nanotubes for freestanding anode with superior Li/Na storage performance

Shouji Huang et al.

Summary: A composite of hollow Co3O4 nanocrystals with N-doped carbon and carbon nanotubes was constructed using a template-free strategy. The composite exhibited excellent electrochemical performance as an anode for both Li and Na ion batteries, with large reversible capacity, superior rate performance, and long cyclic stability. The composite also showed promising application potential in high-performance LIBs/NIBs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

CNTs embedded in layered Zn-doped Co3O4 nano-architectures as an efficient hybrid anode material for SIBs

Sidra Zawar et al.

Summary: In this study, a Co2.98Zn0.02O4/CNTs hybrid was synthesized and utilized as an anode in a Na half cell, exhibiting superior performance compared to Co2.98Zn0.02O4 and bare Co3O4 anodes. The hybrid electrode showed high reversible capacity, remarkable coulombic efficiency, improved capacity retention, and outstanding rate performance, indicating its potential for high-performance and fast charging future sodium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

High-rate sodium storage performance enabled using hollow Co3O4 nanoparticles anchored in porous carbon nanofibers anode

Ranxia Liao et al.

Summary: In this study, hollow Co3O4 nanoparticles anchored in a porous carbon nanofiber matrix were successfully synthesized, showing improved performance as an anode material for sodium-ion batteries, including high specific capacity, outstanding rate performance, and stable cycling. The design strategy offers a new pathway to enhance the performance of Co3O4-based anodes and produce hollow-structure electrode materials for various energy storage devices.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Multidisciplinary Sciences

Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes

Yu-Jie Guo et al.

Summary: The authors have reported a B-doped cathode active material to mitigate irreversible oxygen oxidation at high voltages, leading to increased cell capacity.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Borate Anion Dopant Inducing Oxygen Vacancies over Co3O4 Nanocages for Enhanced Oxygen Evolution

Xuetao Liu et al.

Summary: A sacrificial template strategy was used to prepare borate anion doped nanocages catalyst, which exhibited impressive OER performance with controllable morphology and oxygen vacancy defects, beneficial for accelerating electron transport rate and catalytic activity.

CATALYSTS (2021)

Article Chemistry, Physical

C, N co-doped Co3O4 hollow spheres prepared via hydrothermal reaction for improved electrochemical activity

Yinwei Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Review Green & Sustainable Science & Technology

Prospects in anode materials for sodium ion batteries - A review

Tahira Perveen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Materials Science, Multidisciplinary

Electrochemical Behavior of Cobalt Oxide/Boron-Incorporated Reduced Graphene Oxide Nanocomposite Electrode for Supercapacitor Applications

R. Naresh Muthu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Article Engineering, Chemical

Development of a novel graphene/Co3O4 composite for hybrid capacitive deionization system

Govindaraj Divyapriya et al.

DESALINATION (2019)

Article Engineering, Environmental

Cobalt-boron nanoparticles anchored on graphene as anode of lithium ion batteries

Dong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Multidisciplinary

High-Performance Lithium-Ion Capacitors Based on CoO-Graphene Composite Anode and Holey Carbon Nanolayer Cathode

Xingru Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Engineering, Environmental

Cobalt-based electrode materials for sodium-ion batteries

Shihan Qi et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Multidisciplinary

Nitrogen-Doped Porous Co3O4/Graphene Nanocomposite for Advanced Lithium-Ion Batteries

Huihui Zeng et al.

NANOMATERIALS (2019)

Article Engineering, Environmental

Ni3(BO3)2 as anode material with high capacity and excellent rate performance for sodium-ion batteries

Beibei Xu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Materials Science, Multidisciplinary

Metal-organic frameworks derived flower-like Co3O4/nitrogen doped graphite carbon hybrid for high-performance sodium-ion batteries

Haifeng Xu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Review Chemistry, Multidisciplinary

Two-dimensional transition metal dichalcogenides: interface and defect engineering

Zehua Hu et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Multidisciplinary Sciences

Doping-induced structural phase transition in cobalt diselenide enables enhanced hydrogen evolution catalysis

Ya-Rong Zheng et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Nano Co3O4 as Anode Material for Li-Ion and Na-Ion Batteries: An Insight into Surface Morphology

Subalakshmi Palani et al.

CHEMISTRYSELECT (2018)

Review Chemistry, Physical

Defect engineering in photocatalytic materials

Song Bai et al.

NANO ENERGY (2018)

Article Chemistry, Analytical

Co3O4/carbon allotrope composites as anode material for sodium-ion batteries

Xiaobo Chen et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

Review Chemistry, Physical

Carbon Anode Materials for Advanced Sodium-Ion Batteries

Hongshuai Hou et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Multidisciplinary

Highly active Fe3BO6 as an anode material for sodium-ion batteries

Jianliya Tian et al.

CHEMICAL COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Template-Based Engineering of Carbon-Doped Co3O4 Hollow Nanofibers as Anode Materials for Lithium-Ion Batteries

Chunshuang Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Materials Science, Multidisciplinary

Graphene oxide powders with different oxidation degree, prepared by synthesis variations of the Hummers method

Jesus Guerrero-Contreras et al.

MATERIALS CHEMISTRY AND PHYSICS (2015)

Article Chemistry, Multidisciplinary

Electrochemical investigation of sodium reactivity with nanostructured Co3O4 for sodium-ion batteries

Md Mokhlesur Rahman et al.

CHEMICAL COMMUNICATIONS (2014)

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

Article Chemistry, Physical

Transition metal oxides for high performance sodium ion battery anodes

Yinzhu Jiang et al.

NANO ENERGY (2014)

Article Chemistry, Multidisciplinary

Sodium-Ion Batteries

Michael D. Slater et al.

ADVANCED FUNCTIONAL MATERIALS (2013)