期刊
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
卷 66, 期 -, 页码 414-423出版社
ELSEVIER SCIENCE BV
DOI: 10.1016/j.jtice.2016.07.005
关键词
Mixed matrix membrane; Zeolitic imidazolate framework; ZIF-11; Pebax (R); Gas permeation
In this research, ZIF-11 crystals were successfully synthesized, characterized and incorporated into Pebax (R) 2533 polymer in the range of 10-70 wt% to fabricate mixed matrix membranes (MMMs). SEM images as well as results of TGA and tensile testing analyses confirmed excellent adhesion between ZIF-11 and polymer matrix, especially at 30 wt% loading. The effect of filler loading on gas transport properties of the ZIF-11/Pebax (R) 2533 MMMs was studied for pure H-2, N-2, CH4 and CO2 gases. The ZIF-11 /Pebax (R) 2533 MMMs were found to suffer from polymer chain rigidification and possibly blockage of the fillers by the polymer chains (more obvious at 10 wt% loading); which reduced the permeability of the MMMs. Results showed that at higher loadings, the sieving effect of ZIF-11 dominated the rigidification or pore blockage defects. At 50 and 70 wt% ZIF-11 loadings, a few voids were seen throughout the membranes, but no agglomeration occurred even at 70 wt% loading. Nevertheless, hydrogen ideal selectivities over other gases continued the increasing trend at 50 wt% and did not significantly reduce even at 70 wt% due to high compatibility between ZIF-11 and Pebax (R) 2533. Addition of ZIF-11 to the polymer improved the gas transport properties of the Pebax (R) 2533, especially towards H-2 separation. The highest H-2/N-2 (12.86) and H-2/CH4 (4.81) ideal selectivities were obtained at 50 and 70 wt% loadings, respectively. The highest CO2 permeability (402.89 Barrer) and CO2/CH4 selectivity (12.49) were obtained for 70 wt% loading among all the prepared membranes. (C) 2016 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据