☆ 4.6 Article

Effect of molecular weight on properties of polyarylene ether nitrile-based flexible copper clad laminate

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Effect of nonsolvent on the structures and properties of poly(arylene ether nitrile) films prepared by the phase inversion method

Dengyu Wang et al.

Summary: This study investigates the film formation mechanism and the relationship between structure and properties of PEN films through the phase inversion process using different nonsolvents. The results show that the choice of nonsolvent can change the phase inversion mechanism and the morphology of the films, while the thermal properties remain similar. Among the nonsolvents tested, ethyl acetate (EAC) yielded PEN films with the optimal properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

Interfacial crosslinking enabled super-engineering polymer-based composites with ultra-stable dielectric properties beyond 350 °C

Shuning Liu et al.

Summary: This study focuses on preparing high-temperature resistant composites by introducing nitrile-functionalized agents on the surface of multiwalled carbon nanotubes. The resulting composites exhibit excellent mechanical, thermal, and dielectric properties, making them suitable for energy storage applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Green construction of melamine phytate nanosheets for enhancing anti-corrosive performance of water-borne epoxy coatings

Yanqi Ma et al.

Summary: In this study, water-borne epoxy composite coatings were prepared by introducing environmentally friendly melamine phytate nanosheets into the polymer matrix. The long-term electro-chemical test showed that the addition of nanosheets significantly improved the anti-corrosion performance of the coatings, providing a possible solution for the large-scale application of 2D materials in polymer coatings.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Composites

Effect of functional filler morphology on the crystallization behavior and thermal conductivity of PET resin: A comparative study of three different shapes of BN as heterogeneous nucleating agents

Shimin Wang et al.

Summary: Functional fillers play a crucial role in thermally conductive polymer-based composites. However, little attention has been given to the impact of functional fillers with the same composition but different morphologies on the crystallinity of the matrix and the final thermal conductivity of the composites. In this study, different forms of boron nitride fillers were mixed with PET resin, and their effects on PET crystallization behavior and thermal conductivity were investigated. The results showed that fillers with different shapes but the same composition had varying modification effects on the crystallinity and thermal conductivity of the composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of a robust Cu adhesive layer on poly(ether ether ketone) via self UV-initiated surface polymerization

Joon Hur et al.

Summary: This study presents a process for forming a robust Cu adhesive layer on poly(ether ether ketone) (PEEK) while preserving the thermal, mechanical, and dielectric properties of PEEK. The peel strength of the Cu adhered PEEK -g-Polymer satisfies the required value for flexible copper clad laminate (FCCLs), and the dielectric loss of PEEK -g-Polymer is lower than that of commercial polyimide-based substrate.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Development of a Simultaneous Process of Surface Modification and Pd Nanoparticle Immobilization of a Polymer Substrate Using Radiation

Naoto Uegaki et al.

Summary: Pd nanoparticles were immobilized on an ABS substrate using ionizing radiation. Scanning electron microscopy revealed the presence of Pd nanoparticles on the ABS substrate surface. This method can be applied to various materials, not just plastic plates.

NANOMATERIALS (2022)

添加到收藏夹

Article Environmental Sciences

Hybrid extractive scintillator resin for simultaneous concentration and detection of plutonium from aqueous solutions

W. K. Fullmer et al.

Summary: This study investigated the scoping of a modified commercially available resin, AnaLig (R) Pu-02, for the simultaneous concentration and detection of plutonium in aquatic matrices. The modified resin showed a high detection efficiency and good resistance to interference from environmental constituents. It also achieved real-time detection of plutonium in a commercial flow-cell radiation detector, meeting the EPA's minimum detection limit for gross alpha activity in drinking water.

JOURNAL OF ENVIRONMENTAL RADIOACTIVITY (2022)

添加到收藏夹

Article Chemistry, Physical

Cu-adherent poly(ether ether ketone) with low dielectric loss via self UV-initiated surface modification for high frequency application

Joon Hur et al.

Summary: This study investigates the use of PEEK-g-PGMA, prepared via UV-induced self-initiated surface polymerization, as a potential bonding sheet-free substrate for 5G FCCL. The optimized grafting and hot-press conditions result in PEEK-g-PGMA with lower dielectric constant and loss compared to the commercially used PI films with bonding sheets.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Polymer Science

Comparative study on the effects of water pressure on water absorption of ultra-high molecular weight polyethylene and polyformaldehyde

Song Chen et al.

Summary: This study investigates the water absorption properties of UHMWPE and POM under different pressures through experiments and simulations. The results show that the water absorption decreases with increasing pressure for both UHMWPE and POM within the range of 0 to 3 MPa. POM has a higher water absorption than UHMWPE, and under 3 MPa pressure, the water absorption of POM decreases by about 15.2% compared to normal pressure, while that of UHMWPE decreases by about 41.64%.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Investigation of the controllable thermal curing reaction for ultrahigh Tg polyarylene ether nitrile compositions

Liang He et al.

Summary: This passage introduces a special engineering plastic, polyarylene ether nitrile (PEN), which is suitable for use in harsh environments. By using a specific preparation method, the linear polymer is converted into a 3D network structure, resulting in enhanced performance.

POLYMER (2022)

添加到收藏夹

Article Polymer Science

Poly(arylene ether nitrile) Dielectric Film Modified by Bi2S3/rGO-CN Fillers for High Temperature Resistant Electronics Fields

Li-Fen Tong et al.

Summary: A novel high-temperature-resistant dielectric film for film capacitors was prepared, which exhibited excellent thermal stability and mechanical properties. It is suitable for high-temperature environments and wide frequency range applications.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Flexible h-BN/fluorinated poly (arylene ether nitrile) fibrous composite film with low dielectric constant and high thermal conductivity fabricated via coaxial electrospinning hot-pressing technique

Wei Yang et al.

Summary: In this work, a low dielectric constant and high thermal conductivity poly (arylene ether nitrile) (PEN) fibrous composite film was successfully prepared using coaxial electrospinning hot-pressing technique. By rational design of the material structure, the fibrous composite film exhibited low dielectric constant, low dielectric loss, and high thermal conductivity.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Chemistry, Analytical

A Deployable and Cost-Effective Kirigami Antenna for Sub-6 GHz MIMO Applications

Saad Hassan Kiani et al.

Summary: In this work, a low-cost, deployable, integratable, and easy-to-fabricate multiple-input multiple-output (MIMO) Kirigami antenna is proposed for sub-6 GHz applications. The antenna is inspired by Kirigami art and is composed of four radiating and parasitic elements, providing polarization diversity.

MICROMACHINES (2022)

添加到收藏夹

Article Polymer Science

Dual cross-linking strategy to prepare fluorine-containing poly(arylene ether nitrile) films with a low dielectric constant and ultra-low water uptake

Tong Cao et al.

Summary: A new type of poly(arylene ether nitrile) copolymer with low dielectric constant and excellent thermal and mechanical properties has been designed and synthesized. The polymer exhibits stable performance in humid environments, making it an excellent dielectric material.

POLYMER CHEMISTRY (2022)

添加到收藏夹

Article Polymer Science

Preparation and properties of adhesive-free double-sided flexible copper clad laminate with outstanding adhesion strength

Xianwu Cao et al.

Summary: In this study, a multilayer film was prepared by coating a TPI precursor on a PI base film, and a double-sided flexible copper clad laminate was obtained. The FCCL showed excellent performance, providing a promising solution for the design and fabrication of multilayer printed circuit boards.

HIGH PERFORMANCE POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Design and properties of polyarylene ether nitrile copolymers with improved elongation at break

Shuning Liu et al.

Summary: Polyarylene ether nitrile (PEN) based on biphenol exhibits high glass transition temperature, tensile strength, and low elongation at break. Improved PEN random copolymers with higher elongation at break and excellent mechanical, thermal, and dielectric properties have been synthesized, showing potential for high-temperature resistant applications in insulated cables.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

Linsen Zuo et al.

Summary: By modifying the aramid fiber, a composite material with improved performance, including surface morphology, interfacial adhesion strength, and interlaminar shear strength, was obtained.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

TiO2 immobilized on polyarylene ether nitrile/Fe3+ complex for efficient adsorption and photocatalytic degradation towards methylene blue

Fengjiao Duan et al.

Summary: In this study, Fe3+ was complexed with PEN to form cubic blocks for attaching TiO2, resulting in four types of hybrid cubes with varying TiO2 content. The adsorption capacity of PEN-Fe3+@TiO2 increased with TiO2 content, reaching a maximum of 914.42 mg/g, and the adsorption process was found to be chemically dominated according to pseudo-second-order kinetic model fitting.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Porous fluorinated polyarylene ether nitrile as ultralow permittivity dielectrics used under humid environment

Lingling Wang et al.

Summary: A series of porous fluorinated polyarylene ether nitrile (FPEN) films with ultralow permittivity and excellent mechanical properties were prepared using a delayed phase inversion approach, showing hydrophobic surface and ultralow dielectric constant. These films also maintained their ultra-low dielectric constant, high flexibility, and foldability even under humid conditions, making them suitable for applications in 5G communication systems.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of manufacturing options on signal attenuation of FPCB

Wonmo Yang et al.

MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2020)

添加到收藏夹

Article Materials Science, Composites

Well-organized organosilane composites for adhesion enhancement of heterojunctions

Tzu-Jung Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Polymer Science

Controllable Fabrication of Poly(Arylene Ether Nitrile) Dielectrics for Thermal-Resistant Film Capacitors

Yong You et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Modification on glass fiber surface and their improved properties of fiber-reinforced composites via enhanced interfacial properties

Dengxun Ren et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Preparation of polyarylene ether nitriles/fullerene composites with low dielectric constant by cosolvent evaporation

Xiting Lei et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

添加到收藏夹

Article Polymer Science

Design of the phthalonitrile-based composite laminates by improving the interfacial compatibility and their enhanced properties

Dengxun Ren et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Crystallinity of poly(arylene ether nitrile) copolymers containing hydroquinone and bisphenol A segments

Ling Tu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Chemistry, Applied

Design of long-chain branched copolyesters and manufacture as well as physical properties of their extrusion films

Chiu-Chun Lai et al.

REACTIVE & FUNCTIONAL POLYMERS (2018)

添加到收藏夹

Article Materials Science, Composites

Crystallized Polyarylene Ether Nitrile Blends With Improved Thermal, Mechanical, Dielectric Properties, and Processability

Penglun Zheng et al.

POLYMER COMPOSITES (2017)

添加到收藏夹

Article Chemistry, Applied

The preparation and application of CTBN modified epoxy adhesive

Lizhu Liu et al.

PIGMENT & RESIN TECHNOLOGY (2015)

添加到收藏夹

Article Polymer Science

Study of Polyarylene Ether Nitrile Terminated with Phthalonitrile/Hybrid Fe3O4 Nanospheres Composites by Orthogonal Experiments

Lifen Tong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design of flexible copper clad laminate with outstanding adhesion strength induced by chemical bonding

Kui Li et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2014)

添加到收藏夹

Article Polymer Science

Crosslinking behavior of polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph)/1,3,5-Tri-(3,4-dicyanophenoxy) benzene (TPh) system and its enhanced thermal stability

Lifen Tong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electroless copper plating on 1,2-ethylenediamine grafted poly(ethyleneterepthalate) for the fabrication of flexible copper clad laminate

Longlong Xue et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2013)

添加到收藏夹

Article Materials Science, Composites

Mechanical, Thermal, Electrical, and Interfacial Properties of High-Performance Bisphthalonitrile/Polyarylene Ether Nitrile/Glass Fiber Composite Laminates

Zhiran Chen et al.

POLYMER COMPOSITES (2013)

添加到收藏夹

Article Physics, Applied

Influence of the amorphous/crystalline phase of Zr1-xAlxO2 high-k layers on the capacitance performance of metal insulator metal stacks

Albena Paskaleva et al.

JOURNAL OF APPLIED PHYSICS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dielectric properties and conductivity of carbon nanofiber/semi-crystalline polymer composites

G. Sui et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Polymer Science

ABA triblock copolymers from poly(p-dioxanone) and poly(ethylene glycol)

Ke-Ke Yang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

添加到收藏夹

Article Pharmacology & Pharmacy

Hydrolytic degradation of poly(lactide-co-glycolide) films: effect of oligomers on degradation rate and crystallinity

G Schliecker et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.