相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。
Article
Chemistry, Physical
Jiajia Wang et al.
Summary: Symmetric solid oxide fuel cells are attracting increasing attention due to their simple fabrication and low cost. In this study, Sm-0.5 x 0.5Fe0.9Ni0.1O3-delta materials were synthesized and their physico-chemical properties and electrochemical performance as electrodes were systematically studied. The synthesized materials showed stable phase structures under oxidizing and reducing atmospheres below 750 degrees C, and the peak power densities of the symmetrical cells with different electrodes were measured.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2023)
Article
Chemistry, Physical
Liang Chen et al.
Summary: Oxygen vacancy engineering is an effective method to improve the oxygen evolution reaction performance of transition metal oxides, but the understanding of oxygen vacancies is still limited. In this study, a simple acid capture strategy is used to create oxygen vacancies in transition metal oxides, and it is found that the concentration of oxygen vacancies can be controlled by the acid capture time. Moderate oxygen vacancy concentration can enhance the electrical conductivity and optimize the electronic structure, leading to improved oxygen evolution reaction performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Huiying Huang et al.
Summary: In this study, the Li storage performance of monoclinic Nb2O5 (H-Nb2O5) was optimized by constructing a single-crystalline structure via a simple and efficient one-pot annealing process. The single-crystalline structure effectively maintained the material integrity and suppressed side reactions, while growth along the [001] crystal direction improved Li+ diffusion kinetics. The resulting single-crystalline H-Nb2O5 exhibited ultrahigh rate performance and long cycle durability, as well as remarkable areal capacity and energy density when paired with a commercial activated carbon cathode.
JOURNAL OF MATERIALS CHEMISTRY A
(2023)
Article
Chemistry, Physical
Qian Li et al.
Summary: SnS and SnS2 are two anode materials with excellent theoretical capacity for Sodium ion batteries. However, their electrochemical performance is affected by volume collapse and low electric charge conductivity. The construction of SnS-SnS2 heterostructures improves conductivity, and compounding with Graphene Oxide (GO) prevents volume effects and enhances cyclic stability and initial coulombic efficiency. Experimental and simulation studies show that SnS-SnS2 @GO composites exhibit superior conductivity, cycle stability, and unique nano-flake structure, making them ideal anode materials for sodium ion batteries.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Engineering, Environmental
Yue Lian et al.
Summary: In this study, a composite material (ppy@TNO-x@NC) consisting of Ti2Nb10O29 with modified vacancy defects and an ultrathin polymer coating was developed for high-capacity and stable performance in lithium-ion batteries and hybrid capacitors.
CHEMICAL ENGINEERING JOURNAL
(2023)
Review
Engineering, Environmental
Jiali Chai et al.
Summary: This paper reviews the strategies for the design and preparation of TiX2 (X = O, S, Se) as anode materials for lithium-ion batteries (LIBs) and sodium ion batteries (SIBs), and analyzes the effects of various modifications on the electrochemical performance. The application prospects of TiX2 (X = O, S, Se) in LIBs/SIBs are discussed.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Jianbiao Wang et al.
Summary: This study proposes a controlled interface engineering strategy to stabilize the cycling performance between the electrode and sulfide solid electrolyte through the shrinkage of SnS, achieving superior electrochemical performance with high capacity and discharge capacity. Density functional theory and Arrhenius equation calculations show that the 1-SnS-600 electrode provides low Li+ insertion energy and activation energy, indicating its high efficiency in all-solid-state lithium-ion batteries.
CHEMICAL ENGINEERING JOURNAL
(2022)
Review
Chemistry, Multidisciplinary
Jianlin Li et al.
Summary: Electrode processing plays a crucial role in lithium-ion battery technologies, but has received less attention compared to materials development. This review outlines the steps in electrode processing, summarizes recent progress, analyzes interplays and constraints, and discusses prospective technologies.
Article
Biochemical Research Methods
Ruijie Yang et al.
Summary: Transition metal dichalcogenide (TMD) nanomaterials have versatile properties and have attracted extensive research interest. The electrochemical lithium ion intercalation-based exfoliation method has emerged as a promising strategy for the high-yield production of mono- or few-layer TMD nanosheets, which are important for various applications such as transistors and photodetectors.
Correction
Multidisciplinary Sciences
Jacopo Manigrasso et al.
NATURE COMMUNICATIONS
(2022)
Review
Chemistry, Physical
Jonas Neumann et al.
Summary: This paper provides an overview of the current state and future trends in the recycling technology of lithium-ion batteries. The widespread use of lithium-ion batteries in various applications necessitates the development of efficient recycling methods. However, the complexity of these batteries and their varying compositions pose challenges in establishing a robust recycling procedure. The paper discusses current practices and regulations, as well as predictions and approaches for future battery recycling.
ADVANCED ENERGY MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Chade Lv et al.
Summary: AI technology and computational chemistry can accelerate the research and development of novel battery systems, with successful examples, challenges of deploying AI in real-world scenarios, and an integrated framework outlined. The applications of machine learning in property prediction and battery discovery, as well as the prediction of battery states, are further summarized.
ADVANCED MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Jiande Liu et al.
Summary: In this study, sheet-like stacking SnS2/reduced graphene oxide (rGO) heterostructures were developed, which improved the binding energy of the material and enhanced its conductivity and capacity. The SnS2/rGO heterostructure anode showed high reversible capacity and cycle stability, and the reaction mechanism and ion diffusion behavior were revealed.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Yiyi Wang et al.
Summary: In this study, waste chlorella was used as a reactor and phosphorous source to design few-layered tin sulfides immobilized on nitrogen and phosphorus dual-doped carbon nanofibres. The material exhibited impressive sodium/potassium ion storage performance and promising long-life cycling performance, suggesting its great potential for sodium/potassium-ion battery applications.
Article
Engineering, Chemical
Zenglong Wu et al.
Summary: Applying co-catalyst into Fenton-like advanced oxidation processes for wastewater remediation is a challenging task. In this study, a carbon intercalated molybdenum disulfide anchoring iron catalyst was successfully synthesized by introducing ascorbic acid additive. The catalyst showed remarkable performance in degrading multiple organic contaminants, working within a wide pH range, and avoiding the formation of iron containing sludge.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Review
Chemistry, Applied
Liqiang Zhang et al.
Summary: This review discusses four representative anode materials for rechargeable lithium batteries, detailing their characteristics and challenges. It also summarizes recent advances, primarily focusing on modification strategies of anode materials and optimization of the electrode/electrolyte interface.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Jianbiao Wang et al.
Summary: The study presents nickel sulfide hollow nanospheres as cathode materials for magnesium-ion batteries, prepared by a one-step solvothermal process. Regulating the synergistic effect between rich anions and hollow structure positively influences the electrochemical performance. The optimized cathode can support the practical application of nickel sulfide hollow nanospheres in magnesium-ion batteries.
Article
Chemistry, Multidisciplinary
Huarong Xia et al.
Summary: The characteristic time of diffusion is proposed as a figure of merit to standardize the comparison of fast-charging battery materials by considering diffusion coefficients and geometric sizes. This indicator offers a way to rank the rate capabilities of battery materials and suggests methods to improve rate capability. Incorporating other processes into the current electrochemical model may lead to more comprehensive figures of merit for quantifying rate capabilities of battery materials.
Review
Chemistry, Multidisciplinary
Yahui Tian et al.
Summary: This review provides a systematic summary of the recent progress and applications of Xenes as anodes in Li/Na-ion batteries. The categorization of Xenes from group IIIA to VIA is outlined, and the details of syntheses, structures, and Li/Na-ion storage properties are reviewed. The latest research progress and mechanism discussions of Xenes in Li/Na-ion batteries are summarized. Furthermore, the challenges and prospects of Xenes applied to Li/Na-ion batteries are proposed based on current developments.
Article
Chemistry, Physical
Qian Xiao et al.
Summary: A multidimensional porous anode was designed for sodium ion batteries, showing significant breakthroughs in sodium ion storage performance with high reversible capacity and superior long-term cycling performance. This electrode design strategy based on multidimensional nanoarchitecture sets a new benchmark for high-performance energy storage devices.
Article
Chemistry, Multidisciplinary
Lin Xu et al.
Summary: In this study, ultrafine nanocrystals SnS2 were successfully confined to the inner wall of hollow mesoporous carbon nanospheres (HMCNS) by one-step hydrothermal reaction, forming a special hollow structure with buffer volume effect. The composite showed outstanding electrochemical performance in lithium-ion batteries and sodium-ion batteries, with excellent cyclic stability and rate performance.
ADVANCED MATERIALS INTERFACES
(2022)
Review
Nanoscience & Nanotechnology
Rishabh Jain et al.
Summary: This Perspective compares the attributes of nanoparticles and microparticles as the active electrode material in lithium-ion batteries. It suggests that the future of battery design lies in microscale particles with built-in nanoscale features. The article discusses why the battery industry is unlikely to replace microstructures with nanometre-sized analogues and argues for the use of multiscale particles to develop battery electrodes that combine micro and nano performance attributes.
NATURE REVIEWS MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Hongwei Tao et al.
Summary: In this work, low-valence titanium sulfides (LVTS) were synthesized using electric field control methods, and their electrochemical behaviors as sodium storage anodes were investigated for the first time. The LVTS demonstrated remarkable sodium storage properties under complete electrochemical conversion conditions, with high capacity and cyclic stability. The crystal structure of the LVTS materials contained vacancies that chemically anchored polysulfides, resulting in superior long-term cyclic stability. The high intrinsic conductivity of LVTS facilitated rapid electron transfer and fast conversion of polysulfides to sodium sulfides, enabling high reversible capacities. The TiS material prepared using this method exhibited impressive rate performance due to its fast sodium ion transport kinetics. Overall, the electric field regulation method provides a flexible and efficient route for the preparation of high-performance electrode materials, and LVTS holds promise as a sodium storage material for large-scale energy storage applications.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Electrochemistry
Albina Glibo et al.
Summary: SnS2 synthesized via precipitation reaction method outperforms that synthesized via hydrothermal method in electrochemical performance due to the formation of thicker Li2S layers which limits the expansion of Sn particles.
ELECTROCHIMICA ACTA
(2022)
Article
Chemistry, Physical
Wenjuan Yang et al.
Summary: A universal anode material MoO2@MoS2/NC nanorods has been synthesized for lithium-ion and sodium-ion batteries, improving the rate capability and life span of the electrodes.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Materials Science, Multidisciplinary
Jingfa Li et al.
Summary: The study introduced amorphous Ni-B nanoflakes into hollow Ni-Co sulfide nanospheres to improve sodium-ion storage performance, demonstrating enhanced reversible capacity and redox kinetics during long-term Na+ insertion/extraction.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2021)
Article
Chemistry, Physical
Li Wang et al.
Summary: Designing cobalt sulfide nanoparticles embedded in porous carbon nanosheets through a self-confined synthesis strategy results in excellent electrochemical performance, demonstrating promising application prospects in lithium ion batteries.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Physical
Jianding Li et al.
Summary: By introducing Co nanoparticles into the composite of ZnO and 3D N-doped carbon nanosheet framework, the Zn7Co3 composite exhibited the highest specific capacity of 667 mAh g(-1) at 500 mA g(-1) after 900 cycles. The addition of Co nanoparticles improved the electrochemical performances and the Zn7Co3 composite also showed excellent potassium ion storage performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Review
Chemistry, Physical
Qitao Shi et al.
Summary: This article discusses the increasing importance of rechargeable lithium batteries in daily life and the research focus on high-capacity secondary lithium batteries. Silicon, with its high specific capacity, has been extensively studied as an anode material for Li-ion batteries, but faces challenges from volume changes and solid electrolyte interface issues. By combining carbon materials with silicon, it is possible to improve the electrochemical properties and potentially pave the way for the next generation of commercial lithium batteries.
ENERGY STORAGE MATERIALS
(2021)
Review
Chemistry, Multidisciplinary
Fei Wang et al.
Summary: This review systematically summarizes and analyzes the advantages and challenges of various prelithiation methods, providing enlightenment for the further development of each prelithiation strategy towards commercialization, thus facilitating the practical application of high-specific-capacity anodes in the next-generation high-energy-density lithium-ion batteries.
Article
Chemistry, Physical
Lili L. Zhu et al.
Summary: This paper presents a facile method for the preparation of Bi@N-CNT anode materials with high specific capacity and stability, addressing the issues encountered by traditional Bi anode materials during cycling.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Physical
Ha Tran Huu et al.
Summary: This study successfully applied a solid state reaction to synthesize SnS2@g-C3N4 composites, comprising SnS2 nanosheets dispersed in a porous g-C3N4 matrix. The significant improvement in specific capacity, rated performance, and cycling behavior of the composites was attributed to the buffering effect of the large-surface-area g-C3N4 matrix and the pseudocapacitive effect. Enhanced mobility of charge carriers was achieved through the high exfoliation of SnS2 nanosheets, the high porosity of the composites, and the formation of heterointerfaces between SnS2 and g-C3N4 semiconductors, generating an internal electric field that accelerated the migration of electrons and lithium ions.
APPLIED SURFACE SCIENCE
(2021)
Article
Electrochemistry
Damian M. Cupid et al.
Summary: Tin (IV) sulfide is a promising anode active material for lithium-ion batteries with high reversible capacity, forming an inert Li2S matrix to accommodate mechanical stresses, further research on the thermodynamics, phase formation, and driving forces for Lithiation reactions are still needed to improve electrochemical performance.
ELECTROCHIMICA ACTA
(2021)
Review
Chemistry, Physical
Yue Yang et al.
Summary: This paper examines technologies and research efforts in battery recycling from the perspective of economic viability and life cycle inventory. It highlights the challenges facing battery recycling and the role of battery design and circular economy in the sustainable development of battery industry.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Physical
Yuchao Zhang et al.
Summary: This study successfully prepared Si/TiSi2 composites as anode materials for lithium-ion batteries by coupling photovoltaic silicon waste and metallurgical waste through a new method, and found that the cycling stability of the materials was enhanced when more TiSi2 was introduced.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Materials Science, Multidisciplinary
Qianqian Hu et al.
Summary: The composite material HPC-SnS2-PAN-500, prepared by thermal treatment, demonstrates outstanding performance in lithium ion batteries, showing high specific capacity and cycling stability through composition regulation and architecture modification.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2021)
Review
Chemistry, Physical
Manuel Weiss et al.
Summary: Fast charging is essential for the economic success of electric vehicles, with lithium-ion batteries facing limitations due to the transport of lithium ions within the electrodes. Understanding these limitations is crucial for optimizing material properties for fast-charging applications.
ADVANCED ENERGY MATERIALS
(2021)
Review
Nanoscience & Nanotechnology
Xin He et al.
Summary: This paper discusses the limitations of rechargeable Li metal batteries and the requirements for an ideal passivation layer, focusing on the reactions at the Li metal-liquid electrolyte interface that are crucial for preventing Li consumption and delaying electrolyte decomposition.
NATURE REVIEWS MATERIALS
(2021)
Review
Electrochemistry
Feng Wu et al.
Summary: The increasing demand for high energy density advanced electrochemical energy storage systems (EESSs) for electric vehicles and portable electronics is driving the electrode revolution, with the development of high-mass-loading electrodes (HMLEs) as a promising approach. However, HMLEs face challenges such as poor charge kinetics, electrode structural stability, and complex production processes. This review provides a comprehensive summary of HMLEs, discussing strategies to improve their electrochemical performance and their applications in various EESSs.
ELECTROCHEMICAL ENERGY REVIEWS
(2021)
Article
Chemistry, Physical
Hong Yin et al.
ACS APPLIED ENERGY MATERIALS
(2020)
Article
Chemistry, Physical
Long Ren et al.
JOURNAL OF MATERIALS CHEMISTRY
(2012)
