☆ 4.7 Article

Segregation of solute elements and strengthening effects of CoCrNiCux medium-entropy alloys: A combined experimental and simulation study

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Effect of Cu on the strengthening and embrittling of an FeCoNiCr-xCu HEA

Chengchao Du et al.

Summary: The effect of Cu concentration on the microstructure and mechanical properties of FeCoNiCr-xCu HEAs was studied. Low Cu concentrations contributed to solid solution strengthening, while higher concentrations led to the precipitation of nano Cu-rich particles which increased strength. However, excessive Cu concentration resulted in the formation of a weak continuous Cu-rich phase, leading to decreased strength and elongation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Twins and grain boundaries-dominated the reverse Bauschinger effect and tension- compression asymmetry

Jinjie Zhou et al.

Summary: This study investigates the tension-compression asymmetry and Bauschinger effect of single and polycrystalline aluminum under different loads using molecular dynamics methods. The results show that both types of aluminum exhibit work hardening under tensile and compressive loads, but the characteristics differ between single and polycrystalline aluminum. Additionally, the tension-compression asymmetry and Bauschinger effect are more pronounced in polycrystalline aluminum, with a reverse tension-compression asymmetry observed. The Bauschinger effect is caused by defects introduced through preloading, and the asymmetry is attributed to different microscopic defects.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of structure relaxation and surface oxidation on nanoscopic wear behaviors of metallic glass

Qian Jia et al.

Summary: Both structure relaxation and oxidation of surface layer induced by thermal treatment or friction heat play significant roles in reducing wear of metallic glasses (MGs). The oxidized surface layer exhibits the best anti-wear performance, with significant reductions in both adhesive and ploughing friction, which is attributed to hindered interfacial bonding and enhanced wear resistance.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of electrochemical hydrogen charging on the mechanical property and corrosion behavior of Ti-3Mo alloy

Zhimin Pan et al.

Summary: The effect of electrochemical hydrogen charging on the mechanical property and corrosion behavior of Ti-3Mo alloy was investigated. Failure analysis revealed that crack initiation and propagation did not occur along the crack tip of hydrogen-induced cracking (HIC), but tended to propagate along the alpha/beta interface. Moreover, i(corr) and i(p) increased with increased charging time, indicating that hydrogen charging deteriorated the corrosion resistance of the matrix due to the redox transformation process of the passive film.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Nickel-rich NiCeLaFeCo medium-entropy alloy nanoparticles on oxygen and nitrogen co-doped carbon supports for hydrogen production from toluene cracking

Xiang Xu et al.

Summary: This study developed a simple in situ reduction method to synthesize functionalized carbon-based multi-metallic nanoparticles, which showed good catalytic performance in toluene cracking and hydrogen generation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Zr addition on coarse Laves phase stimulated nucleation of recrystallization in FeCrAl alloy

Wenbo Liu et al.

Summary: This study investigates the effects of coarse Laves phase on the recrystallization behavior of Fe-Cr-Al alloys. The results show that the presence of coarse Laves phases in the matrix leads to finer grains due to particle stimulated nucleation (PSN). Zr addition increases the proportion of coarse Laves phase, promoting PSN and resulting in a fine grain size in the Fe-Cr-Al alloys. The Zr-modified Fe-Cr-Al sample with coarse Laves phases exhibits a high ultimate tensile strength of 600 MPa and an elongation of 28%, indicating improved formability. The superior combination of strength and ductility in this sample is attributed to grain refinement and discontinuous deformation. This study provides insights into the behavior and effects of coarse Laves phase, and offers potential for further design and microstructure control of Fe-Cr-Al alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Physics, Applied

Manipulating molten pool dynamics during metal 3D printing by ultrasound

Zhichao Yang et al.

Summary: In this study, high-speed imaging and multi-physics modeling were used to investigate the flow characteristics and liquid-to-solid transformation in ultrasound-assisted direct energy deposition (UADED). It was found that the inertia force activated by ultrasound drives the molten pool to flow forward and backward along the vibration direction, resulting in poor surface quality. By developing a hybrid deposition strategy, ultrasound-induced defects can be minimized and a superior microstructure with alternating coarse- and fine-grains can be achieved. The layered microstructure leads to a 28% improvement in yield strength and a 15% improvement in ultimate tensile strength compared to additive manufacturing without ultrasound.

APPLIED PHYSICS REVIEWS (2022)

添加到收藏夹

Article Chemistry, Physical

T1 precipitate bands and particle stimulated nucleation in 2195 Al-Cu-Li alloy during hot deformation

Ding-ding Lu et al.

Summary: This paper investigates the dynamic precipitation and recrystallization behavior of aluminum alloys at middle temperature and appropriate strain rates. The results show that these behaviors significantly improve the mechanical properties of the alloys. The study provides valuable insights into the optimization of material structures.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies

Shuhao Wang et al.

Summary: This article systematically discusses the "restriction role" of porosity defects in metal 3D printing, summarizes the characteristics, formation and migration mechanisms of porosity defects, as well as their impacts on the performance of printed parts. In addition, feasible measures to mitigate porosity defects are discussed to inspire the development of more advanced metal 3D printing methods.

MATERIALS TODAY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films

Dawei Luo et al.

Summary: The study demonstrates that NbMoWTa/Ag self-lubricating multilayered films can significantly reduce friction while maintaining high hardness. The film properties are strongly dependent on the individual layer thickness, with the most promising properties obtained when the interface structure transforms into a coherent one. This work may open a new route for developing innovative self-lubricating RHEA films with excellent tribological properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and electrochemical properties of FeNiCoCu medium entropy alloy-graphene oxide composite coatings

Ahmed Aliyu et al.

Summary: The addition of graphene oxide in FeNiCoCu medium entropy alloy coatings significantly changes the microstructure, leading to improved corrosion resistance attributed to enhanced uniformity, grains compactness, impermeability of GO, and formation of a protective Fe-oxide layer.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations

Ruobin Chang et al.

Summary: The addition of Mo element can increase the strength and ductility of CoCrNi alloy, inducing a higher density of stacking faults during tensile deformation. Ab initio calculation results show the MSAD and SFE values of (CoCrNi)(97)Mo-3 alloy, further discussing the relationship between mechanical properties and MSAD, SFE for various multiple principal element alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural and mechanical behavior of a CoCrFeNiCu4 non-equiatomic high entropy alloy

Zijuan Xu et al.

Summary: The study systematically investigated a Cu-rich non-equiatomic HEA, revealing changes in alloy behavior during thermal cycles and thermomechanical processing, including continuous melting and discontinuous solidification of Cu-rich and CoCrFeNi-rich phases. The alloy softened and became more ductile after annealing at different temperatures, with varying effects on mechanical properties. The observation of yield-drop phenomena at certain annealing temperatures suggests further research is needed to understand the locking of pre-existing dislocations by unknown atmospheres.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Role of stress-induced martensite on damage behavior in a metastable titanium alloy

J. F. Xiao et al.

Summary: This study investigates the damage behavior of a typical model metastable Ti-1023 alloy with dominant stress-induced martensite (SIM). The results show that SIM has a dual impact on the damage behavior of the alloy, either facilitating crack nucleation or inhibiting crack propagation depending on the martensitic lath spacing. Additionally, the effect of beta stability on the damage behavior is indirectly determined by the martensitic lath spacing, suggesting that grain boundary engineering should be utilized to fully explore the potential of SIM in developing strong and ductile/tough Ti alloys for broad industrial applications.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical-Affinity Disparity and Exclusivity Drive Atomic Segregation, Short-Range Ordering, and Cluster Formation in High-Entropy Alloys

Shuai Chen et al.

Summary: Experimental observations on two high-entropy alloys (HEAs) show that differences in chemical-affinity disparity and exclusivity among constituent elements lead to different clustering behaviors. Strong atomic segregation and short-range ordering in HEAs are influenced by large chemical-affinity disparities and high chemical-element exclusivity in clusters of different energy levels.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Engineering, Mechanical

Enhanced dynamic mechanical properties and resistance to the formation of adiabatic shear band by Cu-rich nano-precipitates in high-strength steels

B. Z. Long et al.

Summary: Cu-rich nano-precipitate strengthened steel exhibits excellent dynamic mechanical properties and deformation resistance, showing outstanding impact resistance and delayed fracture performance at high strain rates, while effectively hindering the formation of adiabatic shear bands.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lattice distortion as an estimator of solid solution strengthening in high-entropy alloys

Ankit Roy et al.

Summary: Research has shown that increasing the number of elements in high-entropy alloys does not necessarily improve their structural properties, with low- and medium-entropy alloys sometimes exhibiting superior hardness and Young's modulus. The predominant strengthening mechanisms in multicomponent alloys are intrinsic lattice distortion and cohesive energies derived from mixing multiple atom types.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural and compositional design principles for Mo-V-Nb-Ti-Zr multi-principal element alloys: a high-throughput first-principles study

Zhidong Leong et al.

Summary: This study conducted a high-throughput first-principles investigation of the microstructures of MPEAs, uncovering the governing principles and presenting a quantitative expression for predicting solid solution formation. The results reproduced microstructural observations from experiments and provided predictions for unexplored regions, offering simple yet powerful design principles for future experiments to rationally design MPEAs.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

Hossein Eskandari Sabzi et al.

Summary: A new approach to modeling microstructure evolution and yield strength in laser powder bed fusion components was introduced, revealing the activation of various restoration mechanisms during the process. A mechanism for the formation of low-angle grain boundaries to enhance alloy strength was suggested, along with a validated equation based on subgrain size. The study quantitatively described the dependency of yield stress on process parameters and alloy composition.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Origin of strong solid solution strengthening in the CrCoNi-W medium entropy alloy

Yujie Chen et al.

Summary: The study found that doping a small amount of tungsten atoms in CrCoNi alloy can significantly increase the heterogeneity of chemical distribution, resulting in a stronger solid solution strengthening effect. The high sensitivity of elements distribution in multi-principle element alloys to composition plays an important role in tuning the mechanical properties of the alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Solid solution strengthening mechanism in high pressure die casting Al-Ce-Mg alloys

Bo Hu et al.

Summary: The introduction of cerium promoted nucleation of alpha-Al grains and Al11Ce3 phase served as the heterogeneous nucleation substrate of alpha-Al due to small lattice mismatch. The lattice constant of alpha-Al increased with increasing Mg content, enhancing yield strength and hardness due to solid solution strengthening effect. Mg atom solid solution improved work hardening capacity by increasing work hardening exponent and reducing stacking fault energy, promoting dislocation tangles and networks in the alpha-Al matrix.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A systematic analysis of phase stability in refractory high entropy alloys utilizing linear and non-linear cluster expansion models

Chiraag Nataraj et al.

Summary: The phase segregation behavior of three key refractory high entropy alloys was studied using first-principles calculations, and surrogate models were generated to explore the link between phase segregation and intermetallic phases at different temperatures. Each alloy exhibited unique characteristics and properties, with phase segregation and intermetallic phases observed at different temperature ranges.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Engineering, Mechanical

Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation

Dongpeng Hua et al.

Summary: Understanding contact-induced behavior in metals is crucial for studying mechanical properties. Nanoindentation studies on CoCrNi MEA revealed unique dislocation nucleation at Cr-rich clusters, contrary to conventional homogeneous nucleation in pure metals. Compositional inhomogeneity and temperature were found to influence defect behavior, with nanotwin formation and phase-transformation promoted at low temperatures.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hydrogen induced microstructure evolution and cracking mechanism in a metastable dual-phase high-entropy alloy

Hong Luo et al.

Summary: The study observed the influence of hydrogen on high-entropy alloys, finding that the microstructure evolution, mechanical properties, and embrittlement behavior of the alloy are affected by hydrogen exposure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of grain refinement and twin structure on the strength and ductility of Inconel 625 alloy

Xingmao Wang et al.

Summary: Thermo-mechanical treatments were employed to improve the yield strength of Inconel 625 alloy, leading to an increase in strength with a decrease in ductility. The strength-ductility synergy is achieved through the formation of grain boundaries, annealing twins, and deformation twins during plastic deformation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Review Optics

Recent research and development status of laser cladding: A review

Lida Zhu et al.

Summary: This paper provides a detailed introduction to the application of Laser Cladding (LC) in machine parts repairing and functional coating, as well as comprehensive reviews on High Entropy Alloys (HEAs), amorphous alloys, and single crystal alloys in LC. The existing problems and development trends of LC are also discussed in the paper.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A universal configurational entropy metric for high-entropy materials

Olivia F. Dippo et al.

Summary: In recent years, high-entropy materials have become increasingly complex, prompting the proposal of a new entropy metric that is universally applicable for a wide range of crystalline materials, including those with complex crystal structures. This new metric aims to provide a more accurate measure of entropy for these materials beyond the traditional metrics based on metals-specific approximations.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering

Shuai Chen et al.

Summary: The study reveals that short-range ordering in high-entropy alloys can lead to a pseudo-composite microstructure, with different types of clusters playing specific roles to enhance both strength and ductility. This provides a promising route for designing alloys with superior mechanical properties.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Sheng Yin et al.

Summary: The presence of short-range order influences the mobility of dislocations in high-entropy alloys, with edge dislocations being enhanced and double-kink nucleation in screw dislocations being reduced. A cross-slip locking mechanism is observed for the motion of screws, providing extra strengthening for refractory high-entropy alloy system.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Cu-Rich Phase Precipitation on the Microstructure and Mechanical Properties of CoCrNiCux Medium-Entropy Alloys Prepared via Laser Directed Energy Deposition

Yong Xie et al.

Summary: By increasing the Cu content in CoCrNiCux alloys, the microstructure transitions from a single matrix phase to a dual-phase structure, accompanied by a shift in tensile fracture behavior from brittle to plastic. This results in an increase in tensile strength and ductility. Nanoprecipitates and neatly arranged misfit dislocations contribute to enhancing the strength and plasticity of the alloy, while twins in the matrix phase and coordinated dual-phase structures further improve mechanical properties.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling refractory high-entropy alloys with efficient machine-learned interatomic potentials: Defects and segregation

J. Byggmastar et al.

Summary: The study reveals that in the MoNbTaVW alloy, different atomic elements exhibit different segregation behaviors, and during annealing, interstitial atoms in MoNbTaVW tend to recombine defects rather than cluster, in contrast to W.

PHYSICAL REVIEW B (2021)

添加到收藏夹

Article Engineering, Mechanical

Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy

M. Schneider et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM

Landon T. Hansen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen resistance of a 1 GPa strong equiatomic CoCrNi medium entropy alloy

Chandrahaasan K. Soundararajan et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Phase evolution, microstructure, and mechanical behaviors of the CrFeNiAlxTiy medium-entropy alloys

Mengdi Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Ti-V-Al-Cu shape memory alloy by tailoring Cu content

Kuishan Sun et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation nanotwins suppress shear banding during impact test of CrCoNi medium-entropy alloy

Xiaolei Wu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility

Igor Moravcik et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment

Yuan Yu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology

Lida Zhu et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superior strength-ductility CoCrNi medium-entropy alloy wire

Jun-Peng Liu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy

Igor Moravcik et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Short-range order and its impact on the CrCoNi medium-entropy alloy

Ruopeng Zhang et al.

NATURE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties

Jongun Moon et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Atomic structure ofCo92-xBxTa8glassy alloys studied by ab initio molecular dynamics simulations

Di Ma et al.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2020)

添加到收藏夹

Letter Chemistry, Physical

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

B. B. Bian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion

Hong Luo et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Ting Xiong et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Statistics of the NiCoCr medium-entropy alloy: Novel aspects of an old puzzle

Zongrui Pei et al.

NPJ COMPUTATIONAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behavior of CoCrNi medium-entropy alloy compared with 304 stainless steel in H2SO4 and NaOH solutions

Jianying Wang et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening CoCrNi medium-entropy alloy by tuning lattice defects

Hua Huang et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Error controlling of the combined Cluster-Expansion and Wang-Landau Monte-Carlo method and its application to FeCo

Zongrui Pei et al.

COMPUTER PHYSICS COMMUNICATIONS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging

Jian Lan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu

A. Verma et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of aluminum addition on solid solution strengthening in CoCrNi medium-entropy alloy

Maya Putri Agustianingrum et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Mechanical

Strength enhancement induced by grain boundary solute segregations in ultrafine-grained alloys

S. Bobylev et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Relationship of particle stimulated nucleation, recrystallization and mechanical properties responding to Fe and Si contents in hot-extruded 7055 aluminum alloys

Huan She et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys

G. Bracq et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solid-solution strengthening in refractory high entropy alloys

Francisco Gil Coury et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy

Jian Peng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy

Donghee Lee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effective cluster interactions and pre-precipitate morphology in binary Al-based alloys

O. I. Gorbatov et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of plastic strain accommodation and recrystallization behavior in CoCrNiCux medium-entropy alloy

Dennis Edgard Jodi et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase separation and its effect on atomic interactions in CoCrNiCux medium-entropy alloys

Dennis Edgard Jodi et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature

Muxin Yang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins

H. W. Deng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strategies for strengthening-ductility and hierarchical co-precipitation in multicomponent nano-precipitated steels by Cu partitioning

Jiacheng Yan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

CE Screen: An energy-based structure screening automatic workflow

Zongguo Wang et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen embrittlement of an interstitial equimolar high-entropy alloy

Hong Luo et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

On the microstructure and mechanical property of as-extruded Mg-Sn-Zn alloy with Cu addition

Yongjian Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Atomic packing and fractal behavior of Al-Co metallic glasses

M. Kbirou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys

Zhipeng Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCux high-entropy alloys

Xin Xian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength

Muxin Yang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exceptional phase-transformation strengthening of ferrous medium entropy alloys at cryogenic temperatures

Jae Wung Bae et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion

S. Praveen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the deformation twinning mechanisms in twinning-induced plasticity steel

Jin-Kyung Kim et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy

Y. L. Zhao et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation

Z. Tarzimoghadam et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen assisted crack initiation and propagation in a nickel-based superalloy

Zhenbo Zhang et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Chemistry, Physical

Comparison of cluster expansion fitting algorithms for interactions at surfaces

Laura M. Herder et al.

SURFACE SCIENCE (2015)

添加到收藏夹

Article Physics, Applied

Dislocation climb in two-dimensional discrete dislocation dynamics

Kamyar M. Davoudi et al.

JOURNAL OF APPLIED PHYSICS (2012)

添加到收藏夹

Article Engineering, Mechanical

Void growth and coalescence in f.c.c. single crystals

Sangyul Ha et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

An interactive micro-void shear localization mechanism in high strength steels

Cahal McVeigh et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improvement of the work hardening rate of ultrafine grained steels through second phase particles

R Song et al.

SCRIPTA MATERIALIA (2005)

添加到收藏夹

Article Engineering, Industrial

Ductile fracture prediction in axisymmetric upsetting using continuum damage mechanics

S Gupta et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Obtaining Ising-like expansions for binary alloys from first principles

A Zunger et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.