期刊
JOURNAL OF ALLOYS AND COMPOUNDS
卷 962, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2023.171062
关键词
Tensile test; Inclusion Radius; Inclusion type; Strain energy; Young 's modulus
The effects of different inclusion types, inclusion radius, and strain rates on the mechanical properties of NiFeCr alloy were investigated through molecular dynamic simulation. It was found that increasing strain rates led to an increase in tensile strength, strain energy, and dislocation densities. Samples without inclusions had higher tensile strength, strain energy, and dislocation densities compared to samples with inclusions. The inclusion radius had a complex effect, with decreasing Young's modulus for all inclusion types. The phase transformations and dislocation lengths were larger in samples without inclusions, and Stair-rod and Shockley partial dislocations were dominant in all samples.
The effect of different inclusion types, inclusion radius, and strain rates (STRs) on the mechanical property, deformation behaviors, energy absorption, and failure mechanisms of NiFeCr alloy is investigated through a molecular dynamic simulation of a tensile process. The tensile strength, strain energy, and dislocation densities of the sample without and with inclusion all increase as increasing STRs. However, the tensile strength, strain energy, and dislocation densities of the sample without inclusion are all larger than those of the sample with inclusion. Moreover, Young's modulus (E) of the none-inclusion sample is a little smaller than that of the Feinclusion sample while larger than that of the Ni-inclusion and Cr-inclusion samples. The results also show that the effect of inclusion radius is complex, which depends on the type of material that makes up the inclusion. E values decrease as increasing inclusion radius for all inclusion types. The phase transformations from FCC to HCP structure and the dislocation length for the none-inclusion sample are much larger than that of the inclusion samples. Besides, the nuclear deformed appears at the contact area between the inclusion and the NiFeCr workpiece and then widely develops as increasing strain. The Stair-rod and Shockley partial dislocations consider a dominant proportion for all samples.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据