☆ 4.7 Article

Optimization design and numerical study on thermal performance of a novel diamond-type channel cold plate

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Study on flow and heat transfer characteristics of phase change synergistic combination finned liquid cooling plate

Furen Zhang et al.

Summary: This paper proposes a new liquid cooling plate design approach for battery thermal management system to enhance heat transfer performance, achieve a more uniform temperature distribution, and meet lightweight design requirements. The approach combines primary and secondary fins, synergistic phase change materials, and nanofluid. The study compares and analyzes the thermal and flow characteristics of 10 new improved fin designs, optimizes the model by considering fin size and introducing secondary fins, and discusses the thermal performance under different Reynolds number conditions. The results show significant improvements in temperature reduction and pressure drop, lightweighting effect, and heat dissipation efficiency with the use of phase change materials and nanoparticles.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Heat pipe air-cooled thermal management system for lithium-ion batteries: High power applications

Hamidreza Behi et al.

Summary: The study introduces a sandwiched configuration of heat pipes cooling system for lithium-titanate battery cells, and experimentally evaluates the impact of different cooling strategies on cell temperature. Results show that the system can effectively reduce the cell temperature.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Optimization design of a parallel air-cooled battery thermal management system with spoilers

Furen Zhang et al.

Summary: This study proposes a novel cooling strategy by setting spoilers in the airflow distribution plenum of a parallel air-cooling model, aiming to improve the cooling performance of a battery cooling system. Computational fluid dynamics method was used to explore the effects of spoilers on the thermal behaviors of a battery thermal management system. The results show that the number, position, angle, and height of spoilers significantly influence the heat dissipation performance of the battery pack. Adjusting these parameters can effectively enhance the cooling performance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Parametric investigation to optimize the thermal management of pouch type lithium-ion batteries with mini-channel cold plates

Kokkula Monika et al.

Summary: This paper investigates the thermal management of pouch type li-ion battery module, proposing the use of cold plate and micro-channels to control temperature. Through experimental and simulation data, the optimal design parameters are determined to maintain battery temperature within an ideal range under different climatic conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Investigation on liquid cold plate thermal management system with heat pipes for LiFePO4 battery pack in electric vehicles

Yuan Li et al.

Summary: An appropriate battery thermal management system is crucial for electric vehicles to maintain optimal working temperature range and ensure battery efficiency and safety. A liquid cold plate thermal management system with heat pipes is proposed and validated in experiments, showing significant improvement in cooling performance and temperature reduction through orthogonal experiment design, with channel height having the greatest impact.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Evaluation of fin intensified phase change material systems for thermal management of Li-ion battery modules

Ruijin Fan et al.

Summary: Metal fin intensified PCM systems were proposed for thermal control of Li-ion battery modules, which significantly increased the heat exchange area and formed a high thermal conduction network. The results demonstrated that metal fins could effectively enhance the heat dissipation rate and improve the working time of battery modules.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

An improved mini-channel based liquid cooling strategy of prismatic LiFePO4 batteries for electric or hybrid vehicles

K. Monika et al.

Summary: This study proposes an ingeniously designed rectangular mini-channel cold plate for thermal management of lithium iron phosphate (LiFePO4) batteries in automotive applications. The cold plate, with 5 mini channels of width 4 mm and parallel flow design, is shown to be the ideal trade-off between heat transfer and pressure drop for better thermal management across the battery module.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Optimization design for improving thermal performance of T-type air-cooled lithium-ion battery pack

Furen Zhang et al.

Summary: An air-cooled T-type battery thermal management system (T-BTMS) was designed to address high battery temperature and poor temperature uniformity during high-intensity operation, with validated CFD simulations showing improved cooling performance. Structural parameters such as battery layout and top inclination angle were found to have significant impacts on the thermal performance, highlighting the potential for enhancing cooling effectiveness in battery systems.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Engineering, Mechanical

Thermal and flow performance in microchannel heat sink with open-ring fins

Long Zeng et al.

Summary: A unique microchannel heat sink design with inline and staggered open-ring pin fins was developed for high heat flux devices. The open-ring pin fins induced flow separations and convergences, leading to enhanced heat transfer performance. The staggered configuration showed slightly better heat transfer performance than the inline configuration, making it more favorable for heat dissipation in high heat flux devices.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Energy & Fuels

Self-adapting J-type air-based battery thermal management system via model predictive control

Yuanzhi Liu et al.

APPLIED ENERGY (2020)

添加到收藏夹

Review Thermodynamics

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review

Yousef Alihosseini et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles

Hamidreza Behi et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Review Thermodynamics

Review on battery thermal management system for electric vehicles

Jaewan Kim et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Dynamic thermal behavior of micro heat pipe array-air cooling battery thermal management system based on thermal network model

Dan Dan et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Thermal analysis and pack level design of battery thermal management system with liquid cooling for electric vehicles

Yoong Chung et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger

Lei Sheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

A comparative study on battery thermal management using phase change material (PCM)

Ashima Verma et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

添加到收藏夹

Review Thermodynamics

Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review

Yuanwang Deng et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Design, fabrication and numerical analysis of compact thermal management system integrated with composite phase change material and thermal bridge

Raza Gulfam et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Electrochemistry

Electrochemical-thermal Modeling to Evaluate Active Thermal Management of a Lithium-ion Battery Module

Farid Bahiraei et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Energy & Fuels

Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system

Zhonghao Rao et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Design of bifurcating microchannels with/without loops for cooling of square-shaped electronic components

Mahsa Farzaneh et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Comparison of different cooling methods for lithium ion battery cells

Dafen Chen et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions

S. Panchal et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Actively controlled thermal management of prismatic Li-ion cells under elevated temperatures

Haoting Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Chemistry, Physical

Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling

Feifei Liu et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Thermodynamics

Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements

Naixing Yang et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery

Jiateng Zhao et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Thermodynamics

Investigation of power battery thermal management by using mini-channel cold plate

Yutao Huo et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Energy & Fuels

Ultra-thin minichannel LCP for EV battery thermal management

L. W. Jin et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Thermodynamics

Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery

Thanh-Ha Tran et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Computational modeling of a microchannel cold plate: Pressure, velocity, and temperature profiles

Javier A. Narvaez et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Chemistry, Physical

A novel design including cooling media for Lithium-ion batteries pack used in hybrid and electric vehicles

Hassan Fathabadi

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack

Kuahai Yu et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery

Thanh-Ha Tran et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on the heat dissipation performance of battery pack with different structures and operation conditions

X. M. Xu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Article Chemistry, Physical

Design optimization of electric vehicle battery cooling plates for thermal performance

Anthony Jarrett et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.