☆ 4.5 Article

Continuous rotating bending NiTi sheets for elastocaloric cooling: Model and experiments

INTERNATIONAL JOURNAL OF REFRIGERATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Numerical study of a double-effect elastocaloric cooling system powered by low-grade heat

Lifen Yuan et al.

Summary: Elastocaloric cooling technology is a solid-state cooling technology that utilizes the latent heat associated with phase transformation to improve cooling efficiency. This study proposes a double-effect elastocaloric cooling cycle, which can increase the efficiency by three times through the proper design of phase transition temperatures.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Long life elastocaloric regenerator operating under compression

Lucia Ianniciello et al.

Summary: Elastocaloric cooling is a potentially more efficient and environmentally friendly refrigeration technique compared to conventional methods. However, the main challenge lies in the lifetime of the devices, which can be improved by activating them through compression and optimizing the flow system. This study shows promising results in achieving a maximum temperature span and cooling power with a high cycle endurance under compressive cycling.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Phenomenological model for first-order elastocaloric materials

Nora Bachmann et al.

Summary: This paper presents a phenomenological material model for describing the behavior of elastocaloric materials during stress-induced phase transformation. The model calculates the performance parameters of the materials and shows a close correlation with experimental data.

INTERNATIONAL JOURNAL OF REFRIGERATION (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Elastocaloric effect characterization of a NiTi tube to be applied in a compressive cooler

Siyuan Cheng et al.

Summary: This article investigates the elastocaloric effect of a commercial superelastic NiTi shape memory alloy tube for use in a compressive cooler. The results show significant temperature changes under specific strains and strain rates. Furthermore, the study demonstrates the potential of using appropriately sized alloy tubes as refrigerants in compressive devices in terms of cooling power and performance.

AIP ADVANCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bending fatigue life enhancement of NiTi alloy by pre-strain warm surface mechanical attrition treatment

Pengbo Wei et al.

Summary: By applying pre-strain warm surface mechanical attrition treatment, the bending fatigue life of NiTi plates has been improved. The treatment resulted in the formation of amorphous and grain size gradient layers, as well as the generation of compressive residual stress on the surface of the plates. These characteristics provide higher resistance to fatigue crack nucleation and growth, significantly enhancing the fatigue life of the plates.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Physics, Applied

An analytical model for a multilayer elastocaloric cooling regenerator

Chaiyi Huang et al.

Summary: This study investigates the average elastocaloric effect of layering elastocaloric materials on a regenerator with a temperature gradient. By simplifying the material properties and energy conservation equations, an explicit correlation model is developed to predict the performance of the layered regenerator. The results show that the cooling capacity and coefficient of performance are inversely proportional to the temperature span when the nonlinear dependence of elastocaloric heat on temperature is disregarded.

APPLIED PHYSICS LETTERS (2022)

添加到收藏夹

Article Thermodynamics

Enhancing cooling performance of NiTi elastocaloric tube refrigerant via internal grooving

Jiongjiong Zhang et al.

Summary: Developing novel heat transfer surface structures on NiTi shape memory alloy tubes has been shown to improve elastocaloric cooling performance. This study designed and fabricated an internally grooved superelastic NiTi tube and optimized the geometric parameters of the grooves. By using a buckling prevention frame, the grooved NiTi tube showed significantly enhanced cooling power and fatigue life in a compressive regenerative elastocaloric cooling prototype.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

A compact NiTi elastocaloric air cooler with low force bending actuation

Xueshi Li et al.

Summary: This study presents a compact and miniature elastocaloric air cooler using NiTi material, demonstrating its good cooling performance and potential for development.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

High-performance cooling and heat pumping based on fatigue-resistant elastocaloric effect in compression

Ziga Ahcin et al.

Summary: Researchers have developed a new design for an elastocaloric regenerator that can operate in both cooling and heat-pumping modes with durable operation and high performance. This design achieves a maximum temperature span of 31.3 K in the heat-pumping mode or a maximum heating/cooling power of more than 60 W/KG at a temperature span of 10 K.

JOULE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanocomposite NiTi shape memory alloy with high strength and fatigue resistance

Peng Hua et al.

Summary: This study improved the fatigue resistance of NiTi shape memory alloys by utilizing a hybrid heterogenous nanostructure, producing a superelastic nanocomposite with high recoverable strain and yield strength. The synergy of nanosized amorphous and crystalline phases at the nanoscale was found to enhance properties, making it an effective method to improve fatigue resistance and strength of the alloys.

NATURE NANOTECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Phase field study on the microscopic mechanism of grain size dependent cyclic degradation of super-elasticity and shape memory effect in nano-polycrystalline NiTi alloys

Bo Xu et al.

Summary: A phase field model incorporating inelastic deformation mechanisms in nanopolycrystalline NiTi shape memory alloy systems revealed the microscopic mechanism of cyclic degradation due to grain size dependence. Factors affecting different shape memory effects during cyclic deformation were identified.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Thermodynamics

Concept of mechanocaloric granular material made from shape memory alloy

P. Jongchansitto et al.

Summary: Research suggests that using SMAs to create a two-dimensional granular material system can effectively achieve mechanocaloric effects. Experimental results indicate that a nearly-monodisperse configuration of the granular system can optimize the concept.

ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

On the cooling potential of elastocaloric devices for building ventilation

Giulia Ulpiani et al.

Summary: Refrigerants in vapor-compression systems have high global warming potential, while elastocaloric systems offer a promising alternative. A study on an elastocaloric device for air ventilation shows that with moderate terminal velocities and climate-specific design, building cooling needs reductions up to 70% can be achieved.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Elastocaloric heat pump with specific cooling power of 20.9 W g-1 exploiting snap-through instability and strain-induced crystallization

F. Greibich et al.

Summary: The study combines snap-through instability and strain-induced crystallization to achieve rapid and environmentally friendly elastocaloric cooling, opening up new possibilities for solid-state cooling technology.

NATURE ENERGY (2021)

添加到收藏夹

Article Physics, Applied

Low-force elastocaloric refrigeration via bending

Darin J. Sharar et al.

Summary: The study investigates the physics of elastocaloric cooling and demonstrates the potential of using axisymmetric flexural bending as a low-force and low-fatigue heating and cooling mechanism. Experimental results show that four-point bending can achieve a temperature reduction of up to 11.3 degrees Celsius and reduce the required actuation force by 6.09 to 7.75 times compared to uniaxial tension.

APPLIED PHYSICS LETTERS (2021)

添加到收藏夹

Article Energy & Fuels

Cascade utilization of low-grade thermal energy by coupled elastocaloric power and cooling cycle

Suxin Qian et al.

Summary: This study introduces a novel elastocaloric cooling system that utilizes low-grade thermal energy in a cascade manner, with a transition temperature gradient inside shape memory alloy actuator for optimal efficiency. The system shows at least 10% improvement in efficiency and cooling power density compared to linear profiles, and has the potential to be powered by solar thermal collectors for residential air-conditioners and off-grid refrigerators.

APPLIED ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Modelling of elastocaloric regenerators with enhanced heat transfer structures

Yuxiang Zhu et al.

Summary: The study introduced a method of introducing a porous regenerative heat exchanger to an elastocaloric cooling device for enhanced cooling performance. Optimization of the regenerator design can significantly improve Specific Cooling Power and Coefficient of Performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Novel design of a high efficiency multi-bed active magnetic regenerator heat pump

S. Dall'Olio et al.

Summary: The design features a unique magnet and regenerator construction, allowing operation at high frequencies and providing efficient cooling performance.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Long-term stable compressive elastocaloric cooling system with latent heat transfer

Nora Bachmann et al.

Summary: Elastocaloric cooling systems face challenges with long-term stability, but by applying compressive loads and utilizing heat transfer through evaporation and condensation of a fluid, enhanced long-term stability and cooling power density can be achieved.

COMMUNICATIONS PHYSICS (2021)

添加到收藏夹

Article Physics, Applied

Regenerative cooling using elastocaloric rubber: Analytical model and experiments

Gael Sebald et al.

JOURNAL OF APPLIED PHYSICS (2020)

添加到收藏夹

Article Physics, Applied

Compact and efficient elastocaloric heat pumps-Is there a path forward?

Julie Slaughter et al.

JOURNAL OF APPLIED PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving a broad refrigeration temperature region through the combination of successive caloric effects in a multiferroic Ni50Mn35In15 alloy

Zhenzhuang Li et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Thermodynamics

Upscaling of SMA film-based elastocaloric cooling

Giulia Ulpiani et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Physics, Applied

Cu-rich Ti52.8Ni22.2Cu22.5Co2.5 shape memory alloy films with ultra-low fatigue for elastocaloric applications

Lars Bumke et al.

JOURNAL OF APPLIED PHYSICS (2020)

添加到收藏夹

Review Multidisciplinary Sciences

Caloric materials for cooling and heating

X. Moya et al.

SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Torsional refrigeration by twisted, coiled, and supercoiled fibers

Run Wang et al.

SCIENCE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing

Huilong Hou et al.

SCIENCE (2019)

添加到收藏夹

Article Thermodynamics

Experimental parameter identification for elastocaloric air cooling

Nicolas Michaelis et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2019)

添加到收藏夹

Article Multidisciplinary Sciences

A multistage elastocaloric refrigerator and heat pump with 28 K temperature span

Ryan Snodgrass et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Review Energy & Fuels

NiTi-Based Elastocaloric Cooling on the Macroscale: From Basic Concepts to Realization

Susanne-Marie Kirsch et al.

ENERGY TECHNOLOGY (2018)

添加到收藏夹

Article Physics, Applied

A regenerative elastocaloric device: experimental results

Kurt Engelbrecht et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

添加到收藏夹

Article Physics, Applied

SMA foil-based elastocaloric cooling: from material behavior to device engineering

F. Bruederlin et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastocaloric cooling capacity of shape memory alloys - Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation

Y. Wu et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Review Thermodynamics

A review of elastocaloric cooling: Materials, cycles and, system integrations

Suxin Qian et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)

添加到收藏夹

Article Thermodynamics

Elastocaloric effect of a Ni-Ti plate to be applied in a regenerator-based cooling device

Jaka Tusek et al.

SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT (2016)

添加到收藏夹

Article Thermodynamics

Design of a hydraulically driven compressive elastocaloric cooling system

Suxin Qian et al.

SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT (2016)

添加到收藏夹

Article Energy & Fuels

A regenerative elastocaloric heat pump

Jaka Tusek et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Physics, Applied

Elastocaloric effect of Ni-Ti wire for application in a cooling device

J. Tusek et al.

JOURNAL OF APPLIED PHYSICS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy

Hao Yin et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

添加到收藏夹

Article Physics, Applied

Demonstration of high efficiency elastocaloric cooling with large ΔT using NiTi wires

Jun Cui et al.

APPLIED PHYSICS LETTERS (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.