☆ 4.7 Article

Formulation and characterization of pressure-assisted microsyringe 3D-printed scaffolds for controlled intravaginal antibiotic release

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Fabrication and characterization of bioprints with Lactobacillus crispatus for vaginal application

Anthony J. Kyser et al.

Summary: Bacterial vaginosis (BV) is characterized by low levels of lactobacilli and overgrowth of potential pathogens in the female genital tract. Three-dimensional (3D)-bioprinting of Lactobacillus crispatus-containing gelatin alginate scaffolds provides sustained release and proliferation of live bacteria over 28 days, without impacting viability of vaginal epithelial cells. This study presents a novel strategy using 3D-bioprinted scaffolds for long-term probiotic delivery and restoration of vaginal lactobacilli.

JOURNAL OF CONTROLLED RELEASE (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Impact of polymer crosslinking on release mechanisms from long-acting levonorgestrel intrauterine systems

Suraj Fanse et al.

Summary: This study investigated the impact of PDMS crosslinking density on the release mechanisms of levonorgestrel intrauterine systems (LNG-IUSs). The findings showed that formulations with higher crosslinking density exhibited faster drug release rates. Additionally, it was revealed that high PDMS crosslinking forms a solid-state porous branched network, facilitating rapid mass transport of drug molecules.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Performance and paroxetine stability in tablets manufactured by fused deposition modelling-based 3D printing

Sara Figueiredo et al.

Summary: The study aimed to develop a method for preparing and characterizing paroxetine tablets using a combination of hot-melt extrusion and fused deposition modeling (FDM)-based 3D printing technology. The impact of printing process parameters on drug stability and tablet performance was evaluated. The findings showed that 3D-printed tablets met compendial limits and the processing parameters had significant effects on the physicochemical properties and in-vitro performance of the tablets.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2022)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Targeted Delivery of Probiotics: Perspectives on Research and Commercialization

K. S. Yoha et al.

Summary: Probiotic functional foods and drugs are of growing research and commercial interest, requiring careful consideration and specific preparation techniques. Encapsulation is recognized as an effective way to stabilize probiotics, with different encapsulation methods influencing the surface morphology and viability of probiotics.

PROBIOTICS AND ANTIMICROBIAL PROTEINS (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

Simone Eder et al.

Summary: This study explores the use of 3D printing to customize the mechanics and drug release of vaginal pessaries made from pharmaceutical grade thermoplastic polyurethanes (TPU). Soft hydrophobic TPU was found to be the most promising candidate for pessary customization, providing a wide range of mechanical parameters and allowing self-insertion. Hydrophobic TPUs also showed superior drug release performance, closer to the target value. 3D printing of TPU-based pessaries is an innovative strategy to create customized products that offer both mechanical support and pharmacological therapy.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2022)

添加到收藏夹

Article Chemistry, Physical

Development of Composite, Reinforced, Highly Drug-Loaded Pharmaceutical Printlets Manufactured by Selective Laser Sintering-In Search of Relevant Excipients for Pharmaceutical 3D Printing

Piotr Kulinowski et al.

Summary: The study demonstrated the feasibility of producing 3D printed tablets with good mechanical properties and drug release characteristics using composite materials of sintered polyamide and metronidazole. The elastic polyamide mesh maintained the shape and structure of the tablets during drug dissolution and release. Additionally, drug release rate could be modified by adding an osmotic agent to the composite material.

MATERIALS (2022)

添加到收藏夹

Article Instruments & Instrumentation

Fused deposition modeling three-dimensional printing of flexible polyurethane intravaginal rings with controlled tunable release profiles for multiple active drugs

Yufei Chen et al.

Summary: This study demonstrates the use of FDM 3D printing to fabricate intravaginal rings for controlled drug delivery. The release kinetics of different segments can be adjusted by controlling the printing parameters and fill densities.

DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Quality control evaluation of paediatric chocolate-based dosage forms: 3D printing vs mold-casting method

Konstantina Chachlioutaki et al.

Summary: This study aimed to investigate the feasibility of using 3D printing technology to prepare pediatric-friendly personalized dosage forms. The 3D printed dosage forms passed all quality control tests and allowed for precision overdose adjustment, unlike the molded dosage forms prepared using mold-casting. The results suggest that chocolate-based 3D printed dosage forms may serve as a highly acceptable alternative to mold-casting in pharmaceutical compounding.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

添加到收藏夹

Review Pharmacology & Pharmacy

The Evolution of the 3D-Printed Drug Delivery Systems: A Review

Ildiko Bacskay et al.

Summary: The application of 3D printing technology in the pharmaceutical field has great potential. In the past few decades, this technology has made significant progress, particularly in the manufacturing of drug delivery systems. By classifying the manufactured drug delivery systems, researchers can easily explore relevant research directions.

PHARMACEUTICS (2022)

添加到收藏夹

Review Obstetrics & Gynecology

Non-antibiotic treatment of bacterial vaginosis-a systematic review

Fiona Damaris Tidbury et al.

Summary: This article discusses the common treatments for bacterial vaginosis and their limitations, as well as presents the latest efficacy data on alternative non-antibiotic options. The results show that these alternatives appear to be more effective and safe, but more large-scale studies are still needed to provide sufficient evidence.

ARCHIVES OF GYNECOLOGY AND OBSTETRICS (2021)

添加到收藏夹

Review Materials Science, Biomaterials

Silicone-based bioscaffolds for cellular therapies

Mehdi Razavi et al.

Summary: Cellular therapy is becoming a viable option for treating human diseases by transplanting cells to repair damaged tissues, and silicone materials like polydimethylsiloxane (PDMS) are commonly used in biomedical applications due to their biocompatibility. Silicone macroporous bioscaffolds with open pores can support cell growth and vascular network formation for better integration into host tissues.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

3D Printing as a Promising Tool in Personalized Medicine

Vanessa Marcia Vaz et al.

Summary: Personalized medicine aims to tailor medication to individuals based on their physiology, drug response, and genetic profile. One major technology emerging to enable personalized medicine is 3D printing, which can create a variety of pharmaceutical dosage forms. The future application of this technology may include dispensing prescriptions based on individual needs in a clinical setting.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of Polycaprolactone-Based metronidazole matrices for intravaginal extended drug delivery using a mechanochemically prepared therapeutic deep eutectic system

Shu Li et al.

Summary: The engineering of crystalline multi-component drug systems has been well established for modifying the physicochemical properties and dissolution behaviour of active ingredients. However, liquid drug systems like therapeutic ionic liquids and THEDES remain largely unexplored. In this study, a THEDES containing metronidazole was formed and evaluated for its dissolution behaviour from a PCL matrix, showing improved release and controlled delivery of the drug. The end-to-end continuous process presented in this work minimizes handling of the liquid THEDES and offers a viable alternative to oral therapy for drug application.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Effect of crosslinking on the physicochemical properties of polydimethylsiloxane-based levonorgestrel intrauterine systems

Suraj Fanse et al.

Summary: This study investigated the impact of PDMS crosslinking on the physicochemical properties of LNG-IUSs, and developed appropriate testing methods for characterization of their mechanical strength. Formulations with different degrees of crosslinking were prepared and a novel solvent swelling and extraction method was used to determine the degree of PDMS crosslinking. The study found that crosslinking is the predominant parameter governing the physicochemical and mechanical properties in LNG-IUSs.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of thermosensitive and mucoadhesive gels of cabotegravir for enhanced permeation and retention profiles in vaginal tissue: A proof of concept study

Cindy Kristina Enggi et al.

Summary: In this study, three types of vaginal gels for cabotegravir delivery were formulated and evaluated, with a combination of thermosensitive and mucoadhesive properties identified as the optimal dosage form. The gels demonstrated favorable drug release, permeation, and retention characteristics, showing potential efficacy without significant adverse effects in vivo. Further extensive in vivo studies are needed to assess the effectiveness of this approach.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Individualized orodispersible pediatric dosage forms obtained by molding and semi-solid extrusion by 3D printing: A comparative study for hydrochlorothiazide

Javier Suarez-Gonzalez et al.

Summary: Orodispersible tablets are a good alternative for drug administration in pediatric patients, and new technologies like molding and semi-solid extrusion 3D printing offer efficient options for producing individualized dosage forms. This study compared the suitability of these technologies, finding that 3D printing allows for more flexibility in customization for pediatric patients, potentially increasing dose individualization possibilities.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printed clotrimazole intravaginal ring for the treatment of recurrent vaginal candidiasis

Mattia Tiboni et al.

Summary: Vulvovaginal candidiasis is a common vaginal infection that typically affects women of reproductive age and is commonly treated with topical applications of imidazole drugs. Recent studies have shown the potential of 3D printing technology to create intravaginal rings that can provide sustained release of drugs for the treatment of this infection. This innovative approach offers a new method for improving patient compliance and long-term treatment options for recurrent cases.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Article Engineering, Biomedical

Mucoadhesive hyaluronic acid-based films for vaginal delivery of metronidazole

Marina L. Gerton et al.

Summary: The newly developed hyaluronic acid film for delivering metronidazole offers a more effective and convenient alternative treatment for bacterial vaginosis, with the ability to gradually release the drug in the vaginal environment for an extended period. This innovative approach addresses the shortcomings of current treatments, providing a promising solution for women's health.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Evaluation of the mechanical properties and degree of conversion of 3D printed splint material

Leila Perea-Lowery et al.

Summary: The post-curing method, water storage, and printing layer thickness have an impact on the mechanical properties of the investigated 3D printed occlusal splints material. The combination of heat and light within the post-curing unit can enhance the mechanical properties and degree of conversion of 3D printed occlusal splints. Flexural strength and surface hardness can increase when decreasing printing layer thickness.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Investigations of process parameters during dissolution studies of drug loaded 3D printed tablets

Varun Sharma et al.

Summary: The study investigates the impact of different process parameters on the dissolution rate of 3D printed tablets, using Taguchi based design and Fused Deposition Modelling. The results indicate that infill percentage and print speed are critical parameters affecting dissolution rate, providing insight into developing an empirical relation for drug release percentage in the human body.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Perspectives on Existing and Novel Alternative Intravaginal Probiotic Delivery Methods in the Context of Bacterial Vaginosis Infection

Priyadarshini Chandrashekhar et al.

Summary: Bacterial vaginosis is a common vaginal infection with challenges of recurrence and antibiotic resistance, prompting research into using probiotics to maintain vaginal health. This review discusses the potential of probiotic treatment for BV, the advantages and challenges of oral and intravaginal delivery, and emerging alternative dosage forms for intravaginal probiotic delivery.

AAPS JOURNAL (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Manufacturing and Examination of Vaginal Drug Delivery System by FDM 3D Printing

Petra Arany et al.

Summary: Vaginal drug delivery systems using 3D printing technology can offer long-term and consistent release of active pharmaceutical ingredients. The filled jellified metronidazole vaginal rings showed potential bactericidal effects based on microbiological assays, and the polymer exhibited good biocompatibility properties.

PHARMACEUTICS (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Conducting Silicone-Based Polymers and Their Application

Jadwiga Soloducho et al.

Summary: Conducting polymers have experienced rapid growth in both fundamental and applied research over the past two decades. Electrically conductive silicone polymers, a combination of inorganic elements and organic polymers, have emerged as the current state-of-the-art in optoelectronic materials. These materials exhibit excellent thermal stability and possess a range of unique properties such as low surface energy and biocompatibility.

MOLECULES (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Controlling drug release with additive manufacturing-based solutions

Shriya K. Patel et al.

Summary: 3D printing technology has the potential to revolutionize solid dosage form manufacturing, with advantages such as rapid prototyping and the ability to fabricate complex geometries. Different printing technologies and materials can be used to create matrices with varying drug release properties, while methods to manipulate release patterns are critically evaluated.

ADVANCED DRUG DELIVERY REVIEWS (2021)

添加到收藏夹

Review Medicine, General & Internal

Bacterial vaginosis: drivers of recurrence and challenges and opportunities in partner treatment

Lenka A. Vodstrcil et al.

Summary: Bacterial vaginosis (BV) is a common vaginal dysbiosis affecting women globally, with a high proportion experiencing recurrence within 6 months of antibiotic treatment. Possible reasons for recurrence include persistence of BV-associated bacteria, re-emergence, and reinfection from sexual partners. The exchange of bacteria between partners during sexual activity may play a key role in recurrence.

BMC MEDICINE (2021)

添加到收藏夹

Article Obstetrics & Gynecology

Development of Hormonal Intravaginal Rings: Technology and Challenges

Fojan Rafiei et al.

GEBURTSHILFE UND FRAUENHEILKUNDE (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

Martin Spoerk et al.

Summary: Material extrusion-based additive manufacturing, commonly known as 3D printing, is considered crucial for personalized medical treatment. This study demonstrates the potential of utilizing 3D printing to customize vaginal inserts with complex structures, known as urethra pessaries, and adjusting their mechanical properties to relieve symptoms of urinary incontinence. The 3D-printed pessaries not only provide a viable alternative to commercial products, but also have the potential to effectively treat diverse patient groups, making pessary therapy accessible to every woman.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

Tomasz Osmalek et al.

Summary: The vagina has long been considered as a potential drug administration route, with most formulations made of natural or synthetic polymers serving different functions. In addition to topical applications, the anatomical and physiological features of the vagina make it suitable for systemic drug absorption. Research shows that intravaginal products continue to attract scientific attention, with ongoing exploration of novel polymers and formulations.

PHARMACEUTICS (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Predicting Drug Release from 3D Printed Oral Medicines Based on the Surface Area to Volume Ratio of Tablet Geometry

Hellen Windolf et al.

Summary: The study found that 3D printing dosage forms allows for modification of drug release characteristics through altering geometric shapes. By establishing correlations between drug dissolution and dosage form geometry, the study demonstrated accurate prediction of dissolution time and release profiles for specific SA/V ratios.

PHARMACEUTICS (2021)

添加到收藏夹

Article Microbiology

Cervical cancer and vaginal microbiota changes

Stefan Miladinov Kovachev

ARCHIVES OF MICROBIOLOGY (2020)

添加到收藏夹

Review Obstetrics & Gynecology

Bacterial vaginosis-A brief synopsis of the literature

Makella S. Coudray et al.

EUROPEAN JOURNAL OF OBSTETRICS & GYNECOLOGY AND REPRODUCTIVE BIOLOGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Engineering shape-defined PLGA microPlates for the sustained release of anti-inflammatory molecules

Martina Di Francesco et al.

JOURNAL OF CONTROLLED RELEASE (2020)

添加到收藏夹

Article Engineering, Biomedical

Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle

Julia Emmermacher et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery

Juan Dominguez-Robles et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article Chemistry, Medicinal

Electrospun metronidazole-loaded nanofibers for vaginal drug delivery

Fatmanur Tugcu-Demiroz et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Macroscopic Silicone Microchannel Matrix for Tailored Drug Release and Localized Glioblastoma Therapy

Florian Rasch et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and Characterization of a Novel Series of Geometrically Complex Intravaginal Rings with Digital Light Synthesis

Rima Janusziewicz et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

3D printing: An appealing route for customized drug delivery systems

Nermeen A. Elkasabgy et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Bacterial vaginosis: Standard treatments and alternative strategies

Mariana Tomas et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Chemistry, Medicinal

Application of Extrusion-Based 3D Printed Dosage Forms in the Treatment of Chronic Diseases

Manjusha Annaji et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Review Polymer Science

Platinum-Catalyzed Hydrosilylation in Polymer Chemistry

Ruslan Yu. Lukin et al.

POLYMERS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Shaping the future: recent advances of 3D printing in drug delivery and healthcare

Sarah J. Trenfield et al.

EXPERT OPINION ON DRUG DELIVERY (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printing of unique water-soluble polymer-based suppository shell for controlled drug release

Tatsuaki Tagami et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Public, Environmental & Occupational Health

Characterization and Treatment of Recurrent Bacterial Vaginosis

Brooke M. Faught et al.

JOURNAL OF WOMENS HEALTH (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Acceptability of and treatment preferences for recurrent bacterial vaginosis-Topical lactic acid gel or oral metronidazole antibiotic: Qualitative findings from the VITA trial

Jocelyn Anstey Watkins et al.

PLOS ONE (2019)

添加到收藏夹

Article Biophysics

The effect of the presence of biosurfactant on the permeation of pharmaceutical compounds through silicone membrane

Lorena Rodriguez-Lopez et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

Mechanical testing methods for drug-releasing vaginal rings

Clare F. McCoy et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Review Medicine, General & Internal

Bacterial vaginosis: a primer for clinicians

Suzanne Reiter et al.

POSTGRADUATE MEDICINE (2019)

添加到收藏夹

Review Infectious Diseases

High Global Burden and Costs of Bacterial Vaginosis: A Systematic Review and Meta-Analysis

Kathryn Peebles et al.

SEXUALLY TRANSMITTED DISEASES (2019)

添加到收藏夹

Review Microbiology

Metronidazole resistance and nim genes in anaerobes: A review

Corentine Alauzet et al.

ANAEROBE (2019)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printing of vaginal rings with personalized shapes for controlled release of progesterone

Junhui Fu et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polymeric gels for intravaginal drug delivery

Michael T. Cook et al.

JOURNAL OF CONTROLLED RELEASE (2018)

添加到收藏夹

Article Chemistry, Medicinal

Optimization of a Vaginal Suppository Formulation to Deliver SHetA2 as a Novel Treatment for Cervical Dysplasia

Sanjida Mahjabeen et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Rapid measures of user's adherence to vaginal drug products using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and multivariate discriminant techniques

Oluwatosin E. Adedipe et al.

PLOS ONE (2018)

添加到收藏夹

Article Chemistry, Medicinal

Simulated Genital Tract Fluids and Their Applicability in Drug Release/Dissolution Testing of Vaginal Dosage Forms

Katharina Tietz et al.

DISSOLUTION TECHNOLOGIES (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Impact of ring size and drug loading on the pharmacokinetics of a combination dapivirine-darunavir vaginal ring in cynomolgus macaques

Diarmaid J. Murphy et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Glycerol-Silicone Elastomers as Active Matrices with Controllable Release Profiles

Piotr Mazurek et al.

LANGMUIR (2018)

添加到收藏夹

Article Medicine, Research & Experimental

Vaginal microbiome modulates topical antiretroviral drug pharmacokinetics

Ekaterina Taneva et al.

JCI INSIGHT (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

In situ forming pluronic® F127/chitosan hydrogel limits metronidazole transmucosal absorption

Sophia Malli et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2017)

添加到收藏夹

Article Chemistry, Physical

Temperature Effect on Rheological Behavior of Silicone Oils. A Model for the Viscous Heating

Mario R. Romano et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2017)

添加到收藏夹

Review Medicine, General & Internal

Bacterial vaginosis: A practical review

Paulette Bagnall et al.

JAAPA-JOURNAL OF THE AMERICAN ACADEMY OF PHYSICIAN ASSISTANTS (2017)

添加到收藏夹

Review Pharmacology & Pharmacy

A new chapter in pharmaceutical manufacturing: 3D-printed drug products

James Norman et al.

ADVANCED DRUG DELIVERY REVIEWS (2017)

添加到收藏夹

Article Microbiology

Susceptibility of bacterial vaginosis (BV)-associated bacteria to secnidazole compared to metronidazole, tinidazole and clindamycin

Melinda A. B. Petrina et al.

ANAEROBE (2017)

添加到收藏夹

Review Biochemistry & Molecular Biology

The development of probiotics for women's health

Gregor Reid

CANADIAN JOURNAL OF MICROBIOLOGY (2017)

添加到收藏夹

Article Obstetrics & Gynecology

Restoring vaginal microbiota: biological control of bacterial vaginosis. A prospective case-control study using Lactobacillus rhamnosus BMX 54 as adjuvant treatment against bacterial vaginosis

Nadia Recine et al.

ARCHIVES OF GYNECOLOGY AND OBSTETRICS (2016)

添加到收藏夹

Review Pharmacology & Pharmacy

Microbicide vaginal rings: Technological challenges and clinical development

R. Karl Malcolm et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting for engineering complex tissues

Christian Mandrycky et al.

BIOTECHNOLOGY ADVANCES (2016)

添加到收藏夹

Review Microbiology

The Human Microbiome during Bacterial Vaginosis

Andrew B. Onderdonk et al.

CLINICAL MICROBIOLOGY REVIEWS (2016)

添加到收藏夹

Article Infectious Diseases

Identification of intrinsically metronidazole-resistant clades of Gardnerella vaginalis

Jessica A. Schuyler et al.

DIAGNOSTIC MICROBIOLOGY AND INFECTIOUS DISEASE (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

Mohamed A. Alhnan et al.

PHARMACEUTICAL RESEARCH (2016)

添加到收藏夹

Article Biochemical Research Methods

Enhanced Immunostimulating Activity of Lactobacilli-Mimicking Materials by Controlling Size

Koji Nagahama et al.

BIOCONJUGATE CHEMISTRY (2015)

添加到收藏夹

Article Infectious Diseases

A Phase 3, Multicenter, Randomized, Double-Blind, Vehicle-Controlled Study Evaluating the Safety and Efficacy of Metronidazole Vaginal Gel 1.3% in the Treatment of Bacterial Vaginosis

Jane R. Schwebke et al.

SEXUALLY TRANSMITTED DISEASES (2015)

添加到收藏夹

Article Engineering, Biomedical

Effects of crosslinking on the mechanical properties, drug release and cytocompatibility of protein polymers

Adam W. Martinez et al.

ACTA BIOMATERIALIA (2014)

添加到收藏夹

Review Food Science & Technology

Lactobacillus acidophilus: Characterization of the Species and Application in Food Production

Nazia Anjum et al.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2014)

添加到收藏夹

Article Polymer Science

Crosslinking Effect on Polydimethylsiloxane Elastic Modulus Measured by Custom-Built Compression Instrument

Zhixin Wang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Microbiology

Identification, quantification and subtyping of Gardnerella vaginalis in noncultured clinical vaginal samples by quantitative PCR

Sergey V. Balashov et al.

JOURNAL OF MEDICAL MICROBIOLOGY (2014)

添加到收藏夹

Article Chemistry, Medicinal

Modified Silicone Elastomer Vaginal Gels for Sustained Release of Antiretroviral HIV Microbicides

Claire J. Forbes et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2014)

添加到收藏夹

Article Materials Science, Biomaterials

Preparation and characterization of novel carbopol based bigels for topical delivery of metronidazole for the treatment of bacterial vaginosis

Vinay K. Singh et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

添加到收藏夹

Review Obstetrics & Gynecology

The global epidemiology of bacterial vaginosis: a systematic review

Chris Kenyon et al.

AMERICAN JOURNAL OF OBSTETRICS AND GYNECOLOGY (2013)

添加到收藏夹

Article Immunology

Recurrence of Bacterial Vaginosis Is Significantly Associated With Posttreatment Sexual Activities and Hormonal Contraceptive Use

Catriona S. Bradshaw et al.

CLINICAL INFECTIOUS DISEASES (2013)

添加到收藏夹

Article Pharmacology & Pharmacy

Numerical modelling and experimental investigation of drug release from layered silicone matrix systems

Bergthora S. Snorradottir et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2013)

添加到收藏夹

Article Pharmacology & Pharmacy

A silicone elastomer vaginal ring for HIV prevention containing two microbicides with different mechanisms of action

Susan M. Fetherston et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2013)

添加到收藏夹

Review Obstetrics & Gynecology

The vagina as a route for drug delivery: a review

Sushma Srikrishna et al.

INTERNATIONAL UROGYNECOLOGY JOURNAL (2013)

添加到收藏夹

Article Microbiology

A 90-Day Tenofovir Reservoir Intravaginal Ring for Mucosal HIV Prophylaxis

Todd J. Johnson et al.

ANTIMICROBIAL AGENTS AND CHEMOTHERAPY (2012)

添加到收藏夹

Review Chemistry, Medicinal

Vaginal mucoadhesive drug delivery systems

Raphaela Regina de Araujo Pereira et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2012)

添加到收藏夹

Article Pharmacology & Pharmacy

Study of drug release and tablet characteristics of silicone adhesive matrix tablets

Gaurav Tolia et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quantitative evaluation of a hydrophilic matrix intravaginal ring for the sustained delivery of tenofovir

Justin T. Clark et al.

JOURNAL OF CONTROLLED RELEASE (2012)

添加到收藏夹

Article Pharmacology & Pharmacy

Experimental design for optimizing drug release from silicone elastomer matrix and investigation of transdermal drug delivery

Bergthora S. Snorradottir et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Physical crosslinking modulates sustained drug release from recombinant silk-elastinlike protein polymer for ophthalmic applications

Weibing Teng et al.

JOURNAL OF CONTROLLED RELEASE (2011)

添加到收藏夹

Review Obstetrics & Gynecology

Antibacterial treatment of bacterial vaginosis: current and emerging therapies

Jean-Pierre Menard

INTERNATIONAL JOURNAL OF WOMENS HEALTH (2011)

添加到收藏夹

Article Biochemical Research Methods

A method for reducing pressure-induced deformation in silicone microfluidics

David W. Inglis

BIOMICROFLUIDICS (2010)

添加到收藏夹

Article Pharmacology & Pharmacy

Segmented polyurethane intravaginal rings for the sustained combined delivery of antiretroviral agents dapivirine and tenofovir

Todd J. Johnson et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2010)

添加到收藏夹

Review Pharmacology & Pharmacy

Probiotic strategies for the treatment and prevention of bacterial vaginosis

Roderick A. MacPhee et al.

EXPERT OPINION ON PHARMACOTHERAPY (2010)

添加到收藏夹

Article Immunology

Bacterial Vaginosis Assessed by Gram Stain and Diminished Colonization Resistance to Incident Gonococcal, Chlamydial, and Trichomonal Genital Infection

Rebecca M. Brotman et al.

JOURNAL OF INFECTIOUS DISEASES (2010)

添加到收藏夹

Review Pharmacology & Pharmacy

Mucoadhesive drug delivery system: An overview

Bindu M. Boddupalli et al.

JOURNAL OF ADVANCED PHARMACEUTICAL TECHNOLOGY & RESEARCH (2010)

添加到收藏夹

Article Chemistry, Analytical

Independent Control of Drop Size and Velocity in Microfluidic Flow-Focusing Generators Using Variable Temperature and Flow Rate

Claudiu A. Stan et al.

ANALYTICAL CHEMISTRY (2009)

添加到收藏夹

Review Pharmacology & Pharmacy

A review of current intravaginal drug delivery approaches employed for the prophylaxis of HIV/AIDS and prevention of sexually transmitted infections

Valence M. K. Ndesendo et al.

AAPS PHARMSCITECH (2008)

添加到收藏夹

Article Physiology

Effect of vaginal distention on elastic fiber synthesis and matrix degradation in the vaginal wall: potential role in the pathogenesis of pelvic organ prolapse

D. D. Rahn et al.

AMERICAN JOURNAL OF PHYSIOLOGY-REGULATORY INTEGRATIVE AND COMPARATIVE PHYSIOLOGY (2008)

添加到收藏夹

Review Infectious Diseases

Probiotics: Potential to prevent HIV and sexually transmitted infections in women

Michael Bolton et al.

SEXUALLY TRANSMITTED DISEASES (2008)

添加到收藏夹

Article Public, Environmental & Occupational Health

Human lactobacilli as supplementation of clindamycin to patients with bacterial vaginosis reduce the recurrence rate; a 6-month, double-blind, randomized, placebo-controlled study

Per-Göran Larsson et al.

BMC Womens Health (2008)

添加到收藏夹

Article Infectious Diseases

The prevalence of bacterial vaginosis in the United States, 2001-2004; Associations with symptoms, sexual behaviors, and reproductive health

Emilia H. Koumans et al.

SEXUALLY TRANSMITTED DISEASES (2007)

添加到收藏夹

Article Obstetrics & Gynecology

Asymptomatic bacterial vaginosis and intermediate flora as risk factors for adverse pregnancy outcome

Harald Leitich et al.

BEST PRACTICE & RESEARCH IN CLINICAL OBSTETRICS & GYNAECOLOGY (2007)

添加到收藏夹

Article Obstetrics & Gynecology

Bacterial vaginosis in a cohort of Danish pregnant women: prevalence and relationship with preterm delivery, low birthweight and perinatal infections

J. A. Svare et al.

BJOG-AN INTERNATIONAL JOURNAL OF OBSTETRICS AND GYNAECOLOGY (2006)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlled release of a model antibacterial drug from a novel self-lubricating silicone biomaterial

RK Malcolm et al.

JOURNAL OF CONTROLLED RELEASE (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design of a silicone reservoir intravaginal ring for the delivery of oxybutynin

AD Woolfson et al.

JOURNAL OF CONTROLLED RELEASE (2003)

添加到收藏夹

Article Immunology

Bacterial vaginosis is a strong predictor of Neisseria gonorrhoeae and Chlamydia trachomatis infection

HC Wiesenfeld et al.

CLINICAL INFECTIOUS DISEASES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.