相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites
N. Ramadoss et al.
INTERNATIONAL JOURNAL OF METALCASTING (2023)
RECYCLING OF ALUMINIUM MATRIX COMPOSITES (AMCS): A REVIEW AND THE WAY FORWARD
R. P. Barot et al.
INTERNATIONAL JOURNAL OF METALCASTING (2023)
Investigation of Microstructure and Mechanical Properties of Cast Al-10Zn-3.5Mg-2.5Cu Nanocomposite Reinforced with Graphene Nano Sheets Produced by Ultrasonic Assisted Stir Casting
Mohammad Alipour et al.
INTERNATIONAL JOURNAL OF METALCASTING (2023)
Investigation of Mechanical Characterization, Thermal Behavior and Dielectric Properties on Al7075-TiB2 MMC Fabricated Using Stir Casting Route
M. Thirumal Azhagan et al.
INTERNATIONAL JOURNAL OF METALCASTING (2023)
Investigations on Mechanical Properties of Micro- and Nano-Particulates (Al2 O3/B4C) Reinforced in Al 7075 Matrix Composite
G. Kumaresan et al.
INTERNATIONAL JOURNAL OF METALCASTING (2022)
Effect of TiB2 Particles on the Morphological, Mechanical and Corrosion Behaviour of Al7075 Metal Matrix Composite Produced Using Stir Casting Process
M. Manoj et al.
INTERNATIONAL JOURNAL OF METALCASTING (2022)
Effect of high entropy particle on aerospace-grade aluminium composite developed through combined mechanical supersonic vibration and squeeze infiltration technique
Vasanthakumar Pandian et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
The Influence of Multi-Phase Intermetallic Compounds on the Microstructure and Tribological Behaviors of 6061 Al Alloy by Adding AlCoCrFeNi High-Entropy Alloy
Qinglin Li et al.
INTERNATIONAL JOURNAL OF METALCASTING (2022)
A critical review on mechanically alloyed high entropy alloys: processing challenges and properties
Akshay Kumar et al.
MATERIALS RESEARCH EXPRESS (2022)
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Akshay Kumar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Synthesis and characterization of a novel CoCrFeMnNi high-entropy alloy-reinforced AA6082 composite
Akshay Kumar et al.
JOURNAL OF MATERIALS RESEARCH (2022)
Processing and preparation of aerospace-grade aluminium hybrid metal matrix composite in a modified stir casting furnace integrated with mechanical supersonic vibration squeeze infiltration method
Vasanthakumar Pandian et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy
Qing Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes
Shaoqiu Xia et al.
FUSION ENGINEERING AND DESIGN (2021)
Achieving high strength and high ductility in a high-entropy alloy by a combination of a heterogeneous grain structure and oxide-dispersion strengthening
Zhuo Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of Co on the microstructure and oxidation behavior of CoxCrCuFeMnNi high entropy alloy powders
Jianjian Zhang et al.
MICRON (2021)
50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities
Ajay P. Kumar et al.
INTERNATIONAL JOURNAL OF METALCASTING (2020)
Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites
H. B. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites
Zhanwei Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructures and mechanical properties of oxide dispersion strengthened CoCrFeNi high-entropy alloy produced by mechanical alloying and spark plasma sintering
Mingyang Li et al.
INTERMETALLICS (2020)
Producing of FeCoNiCrAl high-entropy alloy reinforced Al composites via friction stir processing technology
Jicheng Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement
Junchen Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites
Anvesh Dhulipalla et al.
MANUFACTURING LETTERS (2020)
Microstructure and mechanical properties of fine-grained aluminum matrix composite reinforced with nitinol shape memory alloy particulates produced by underwater friction stir processing
G. Q. Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Characterization of Al-7075 metal matrix composites: a review
Mohammed Imran et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Microstructure and mechanical properties of FeCoCrNiMnTi0.1C0.1 high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering
Xiaoqiang Liu et al.
VACUUM (2019)
Microstructure Control and Performance Evolution of Aluminum Alloy 7075 by Nano-Treating
Min Zuo et al.
SCIENTIFIC REPORTS (2019)
Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles
Tiwen Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles
Weiping Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility
Yuming Xie et al.
COMPOSITES PART B-ENGINEERING (2019)
Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering
Zhanwei Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying
F. Alijani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition
Rahul Gupta et al.
COMPOSITES PART B-ENGINEERING (2018)
Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering
Yanchong Xie et al.
INTERMETALLICS (2018)
The effects of Cr particles addition on the aging behavior and mechanical properties of SiCp/7075Al composites
Tiwen Lu et al.
MATERIALS CHARACTERIZATION (2018)
The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites
Tiwen Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying
Dariusz Oleszak et al.
MATERIALS LETTERS (2018)
A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye
W. W. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering
Jiayi Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Database on the mechanical properties of high entropy alloys and complex concentrated alloys
S. Gorsse et al.
DATA IN BRIEF (2018)
Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide
K. Ravi Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure, mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles
H. R. Ezatpour et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability
Devinder Yadav et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
The design of a novel neutron shielding B4C/Al composite containing Gd
Z. G. Xu et al.
MATERIALS & DESIGN (2016)
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
B. Schuh et al.
ACTA MATERIALIA (2015)
Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering
Wei Ji et al.
INTERMETALLICS (2015)
Fabrication and characterization of 2024 aluminium - High entropy alloy composites
K. Praveen Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites
M. Karbalaei Akbari et al.
MATERIALS & DESIGN (2015)
Multi Response Optimization for Processing Al-SiCp Composites: An Approach Towards Enhancement of Mechanical Properties
H. Goyal et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
Precipitation strengthening of Al-B4C metal matrix composites alloyed with Sc and Zr
J. Lai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Thermal Stability and Performance of NbSiTaTiZr High-Entropy Alloy Barrier for Copper Metallization
Ming-Hung Tsai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles
Zhihui Zhang et al.
SCRIPTA MATERIALIA (2011)
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy
S. Scudino et al.
ACTA MATERIALIA (2009)
Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO
A. Ansary Yar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites
S. Scudino et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology
Jinfeng Leng et al.
SCRIPTA MATERIALIA (2008)
Effect of Mg and Si in the aluminum on the thermo-mechanical properties of pressureless infiltrated SiCp/Al composites
Shubin Ren et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio
A Slipenyuk et al.
ACTA MATERIALIA (2006)
Degassing of molten aluminum A356 alloy using ultrasonic vibration
HB Xu et al.
MATERIALS LETTERS (2004)
Fabrication of Ni-Nb-Ta metallic glass reinforced Al-based alloy matrix composites by infiltration casting process
MH Lee et al.
SCRIPTA MATERIALIA (2004)