☆ 4.7 Article

An improved springback model considering the transverse stress in microforming

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Time-dependent springback of high strength titanium tubular materials: Experiment and modeling

Heng Li et al.

Summary: The study explores the physical mechanisms of time-dependent springback in high-strength titanium tubular materials during bending, and develops a Viscoelastic-Kelvin constitutive model for accurate prediction. The findings clarify the effects of time-dependent springback on spatial multi-bending components, aiding in achieving higher precision manufacturing of high performance tubular components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Description of elastic-plastic stress-strain transition in cyclic plasticity and its effect on springback prediction

Fusahito Yoshida

Summary: In the cyclic plasticity deformation of metallic materials, the effects of nonlinearity and the Bauschinger effect were observed. Two plasticity models were used to describe the behavior, and their effects on springback prediction were examined.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2022)

添加到收藏夹

Article Automation & Control Systems

Simulation and experimental researches on multi-plate rubber pad forming of two-step micro-channel based on different forming driving models

Teng Fei et al.

Summary: This paper uses advanced rubber pad forming technology to manufacture new two-step micro-channel structures and studies the impact of forming methods on metal plates.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Characterizing springback stress behavior in VPB by experimental-numerical hybrid method

Yekun Feng et al.

Summary: This study examines the characteristics of springback stress in viscous pressure bulging through an experimental-numerical hybrid method. By measuring springback data and using a numerical calculation program, springback stresses along different directions are obtained. The results show that the springback stress can adhere to actual conditions and varies with the degree of springback. The choice of viscous medium affects the shape and stress of the sheet, thus influencing the variation of springback stress.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Industrial

Research on mechanism of springback control by viscous medium with different mechanical properties

Ye-kun Feng et al.

Summary: This paper investigates the effect of viscous medium on springback and the mechanism of springback control. Numerical simulations and experiments reveal that the non-uniformly distributed force of viscous medium can change the shape and stress path of the sheet. Viscous medium with good strain rate sensitivity and viscosity can effectively control springback by promoting uniform stress distribution and reducing bending moment near the die corner.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

Finite element implementation of hydrostatic pressure-sensitive plasticity and its application to distortional hardening model and sheet metal forming simulations

Seong-Yong Yoon et al.

Summary: In this study, the hydrostatic pressure-dependency of the distortional plasticity model HAH(20) was implemented using a finite element code to account for the strength-differential effect observed in high-strength steel sheets. The implementation was validated by comparing the results with a stand-alone code and experimental data, and the influence of the strength-differential effect on springback simulation was analyzed.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Prediction of springback after bending under tension

Yanfeng Yang et al.

Summary: The effect of kinematic hardening on springback predictions in sheet metals was investigated using a modular bending-under-tension test. Different loading configurations were identified which require the use of specific hardening models to ensure predictive accuracy. The research findings are important for the development of advanced material models.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Numerical and experimental study of the size effect on deformation behavior and quality of microembossed multi-channel structures

Xu Tong et al.

Summary: With the trend of product miniaturization and precision manufacturing, the microembossing process of sheet metal has become widely used and researched. However, there are still many unknowns, such as size effect and deformation behavior. In this study, different thicknesses of multi-channel structures made of pure copper sheets were used as case studies. The effects of grain size and sheet thickness on the microembossing process and product were studied through simulations and experiments.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Automation & Control Systems

Numerical simulation and experiment of microstamping process to fabricate multi-channel of SUS304 thin sheets with different grain size

Shangyu Si et al.

Summary: This paper studies the effects of size on the springback behavior of thin metal sheets during microstamping process. A constitutive model incorporating surface layer and grain structures is developed to accurately characterize the global springback behavior. Experimental and numerical results confirm the significance of size effects in microstamping and validate the developed model.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect

Qingdang Meng et al.

Summary: A new analytical model considering stress inheritance, the Bauschinger effect, and nonlinear unloading-reloading behavior was established to accurately predict springback in difficult-to-form metals. Experimental verification showed good agreement between the analytical results and experimental results, with an average relative error within 3% for the 6061 aluminum alloy rectangular section beam. The analytical model established in this study has higher prediction accuracy and faster solution speed compared to existing models.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Analytical springback assessment in flexible stretch bending of complex shapes

J. Ma et al.

Summary: Stretch bending is commonly used for fabricating complex profiles, but controlling springback remains a challenge. This study introduces a novel stretching-controlled bending process and develops a Full Moment analytical model for accurate springback assessment. Experimental validation demonstrates high capability for controlling springback and dimensional accuracy.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation on springback behaviours of hexagonal close-packed sheet metals

Hamed Mehrabi et al.

Summary: This study introduces a novel analytical method for predicting bending and springback behaviors of HCP sheet metals. By utilizing the variable elastic modulus approach, the model is able to capture nonlinearity in unloading and improve springback prediction. Results show significant improvements in prediction by considering the reverse effects of back force on springback behaviors under plane strain conditions.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Engineering, Mechanical

Modelling of Springback in Tube Bending: A Generalized Analytical Approach

J. Ma et al.

Summary: This research presents a generalized analytical solution for springback in tube bending, enabling accurate and efficient analysis of springback for bending of general tubular materials, in particular, for the tubes with tension-compression asymmetry. By taking the rotary draw bending of high-strength titanium tubes as a case study, the developed analytical model was carefully evaluated, showing its good efficiency for springback prediction - particularly for the large-angle (>= 90 deg.) forming cases.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Industrial

Springback behavior and a new chord modulus model of copper alloy during severe plastic compressive deformation

Hongli Hou et al.

Summary: The study investigates the springback behavior of copper alloy after SPCD, revealing the effects of strain hardening, strain softening, and anisotropy on springback behavior. A new chord modulus model and 1-D ET model in a power exponential form were proposed to accurately predict the chord modulus and springback strain after SPCD. Results showed significant differences in springback behavior between SPCD and small plastic compressive deformation.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Size effects in multi-scale materials processing and manufacturing

M. W. Fu et al.

Summary: Size effects are caused by changes in material parameters and can induce various behaviors and phenomena during multi-scale processing. Parts and components fabricated from multi-scale processing exhibit quality and property scatters. The paper reviews and analyzes the size effects in material processing and manufacturing, discussing future research directions and highlighting key problems to be solved.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Article Chemistry, Physical

Springback Prediction for Pure Moment Bending of Aluminum Alloy Square Tube

Stanislaw Kut et al.

Summary: This study analyzed the springback phenomenon of aluminum square tubes under pure bending moments and determined the relationship between the springback coefficient and the bending radius. The calculation results were in good agreement with experimental tests, and comparisons were made with the results from bending solid bars.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Prediction of bending springback of the medium-Mn steel considering elastic modulus attenuation

Y. Chang et al.

Summary: The study focused on the bending springback of medium-Mn steel, a third-generation automobile steel, through experiments and simulations. It evaluated the mechanical properties and established a correlation model between unloading elastic modulus and true plastic strain. V-shaped bending tests were conducted under different conditions to analyze the effects of various factors on springback, with variable elastic modulus showing closer simulation results to the experimental ones.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Interactive effect of grain size and crystal structure on deformation behavior in progressive micro-scaled deformation of metallic materials

X. F. Tang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: Experiments and modeling

Yumi Choi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Model for description of nonlinear unloading-reloading stress-strain response with special reference to plastic-strain dependent chord modulus

Fusahito Yoshida et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Review Chemistry, Physical

Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes

Yu Leng et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Review Engineering, Manufacturing

Effect of constitutive model on springback prediction of MP980 and AA6022-T4

Jianping Lin et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)

添加到收藏夹

Article Automation & Control Systems

Springback prediction of AL6061 pipe in free bending process based on finite element and analytic methods

Yusen Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Validation of homogeneous anisotropic hardening model using non-linear strain path experiments

Shin-Yeong Lee et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Modeling differential permanent softening under strain-path changes in sheet metals using a modified distortional hardening model

Jinwoo Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Chemistry, Physical

Analytical Model for Springback Prediction of CuZn20 Foil Considering Size Effects: Weakening versus Strengthening

Xin Guan et al.

MATERIALS (2020)

添加到收藏夹

Article Automation & Control Systems

A novel finite element simulation of hot stamping process of DP780 steel based on the Chaboche thermomechanically hardening model

Hamid Hajbarati et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Optimal Design of Stamping Process for Fabrication of Titanium Bipolar Plates Using the Integration of Finite Element and Response Surface Methods

Vahid Modanloo et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Manufacturing of Titanium Bipolar Plates Using Warm Stamping Process

Vahid Modanloo et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

An analytical model for rapid prediction and compensation of springback for chain-die forming of an AHSS U-channel

Yaguang Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

Combined anisotropic and distortion hardening to describe directional response with Bauschinger effect

Eun-Ho Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Manufacturing

A novel analytical model to predict springback of DP780 steel based on modified Yoshida-Uemori two-surface hardening model

Hamid Hajbarati et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)

添加到收藏夹

Article Automation & Control Systems

Relationship between mechanical properties and geometric parameters to limitation condition of springback based on springback-radius concept in V-die bending process

Daw-Kwei Leu

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

A springback prediction method for a cylindrical workpiece bent with the multi-point forming method

Chunguo Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

An analytical springback model for bending of welded tube considering the weld characteristics

M. Zhan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Improvement of springback prediction accuracy for Z-section profiles in four-roll bending process considering neutral layer shift

Anheng Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Springback prediction and elasticity modulus variation

Richard Aerens et al.

18TH INTERNATIONAL CONFERENCE ON SHEET METAL, SHEMET 2019 - NEW TRENDS AND DEVELOPMENTS IN SHEET METAL PROCESSING (2019)

添加到收藏夹

Article Mechanics

Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending

Jisik Choi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Constitutive Equations on Springback Prediction Accuracy in the TRIP1180 Cold Stamping

Ki-Young Seo et al.

METALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Springback study of RDB of rectangular H96 tube

Y. X. Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Study of springback effect of AHS steels using a microstructure based modeling

W. Julsri et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Stretch bending and springback of profile in the loading method of prebending and tension

Ruixue Zhai et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modeling of surface layer and strain gradient hardening effects on micro-bending of non-oriented silicon steel sheet

Zhe Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Thermodynamics

Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments

Diankai Qiu et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Engineering, Mechanical

Influence of size effect and plastic strain gradient on the springback behaviour of metallic materials in microbending process

J. L. Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Automation & Control Systems

An analytical modeling for springback prediction during U-bending process of advanced high-strength steels based on anisotropic nonlinear kinematic hardening model

Asghar Zajkani et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Constitutive modeling for path-dependent behavior and its influence on twist springback

Juan Liao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Engineering, Industrial

Improvement of springback prediction accuracy by considering nonlinear elastoplastic behavior after stress reversal

S. Sumikawa et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of forming parameters on springback for ultra high strength steel considering Young's modulus variation in cold roll forming

Xiaoli Liu et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of the variable elastic unloading modulus coupled with nonlinear kinematic hardening in springback measuring of advanced high-strength steel in U-shaped process

Asghar Zajkani et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Deformation in Micro Roll Forming of Bipolar Plate

P. Zhang et al.

36TH IDDRG CONFERENCE - MATERIALS MODELLING AND TESTING FOR SHEET METAL FORMING (2017)

添加到收藏夹

Article Engineering, Mechanical

Accurate springback prediction in deep drawing using pre-strain based multiple cyclic stress-strain curves in finite element simulation

Hamad Ul Hassan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Mechanical

Prediction of springback in air-bending of Advanced High Strength steel (DP780) considering Young's modulus variation and with a piecewise hardening function

Xi Yang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Engineering, Industrial

Improvement of springback prediction accuracy using material model considering elastoplastic anisotropy and Bauschinger effect

S. Sumikawa et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Industrial

Scale effect on springback behavior of pure titanium foils in microbending at elevated temperature

Qiu Zheng et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process

Hyuk Jong Bong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel

Xin Xue et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Engineering, Industrial

Grain size effect on springback behavior in bending of Ti-2.5Al-1.5Mn foils

Zhenwu Ma et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Manufacturing

Formability evaluation of stainless steel bipolar plate considering draft angle of die and process parameters by rubber forming

Min-Geun Jeong et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)

添加到收藏夹

Article Chemistry, Physical

Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell

Diankai Qiu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

添加到收藏夹

Article Engineering, Mechanical

Advanced Issues in springback

Robert H. Wagoner et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of springback under the effect of holding force and die radius in a stretch bending test

E. H. Ouakdi et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Engineering, Manufacturing

Reduction of springback using simultaneous stretch-bending processes

Hansjoerg Schilp et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of size effect on the springback of sheet metal foils in micro-bending

J. G. Liu et al.

COMPUTATIONAL MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Mechanical

An alternative to kinematic hardening in classical plasticity

Frederic Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Size effect on springback behavior due to plastic strain gradient hardening in microbending process of pure aluminum foils

Hezong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Material behavior modelling in micro/meso-scale forming process with considering size/scale effects

Xinmin Lai et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

添加到收藏夹

Article Engineering, Industrial

Springback behavior of brass in micro sheet forming

Jenn-Terng Gau et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size effects in thin sheet metal forming and its elastic-plastic constitutive model

Linfa Peng et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Mechanical

A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation

F Yoshida et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.