4.5 Article

Effect of near-field characteristics on the two-phase distribution of superheated ammonia spray

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Green & Sustainable Science & Technology

Pilot diesel-ignited ammonia dual fuel low-speed marine engines: A comparative analysis of ammonia premixed and high-pressure spray combustion modes with CFD simulation

Xinyi Zhou et al.

Summary: The decarbonization of global shipping is crucial in mitigating climate change, and ammonia has been identified as a sustainable and zero-carbon fuel for the maritime industry. Despite existing studies primarily focusing on automotive engines, research on marine low-speed engines is limited. This paper establishes numerical models for a pilot diesel-ignited ammonia dual-fuel engine, utilizing a commercial low-speed marine diesel engine as a prototype. The models are validated with experimental data, and engine performance and emissions are studied and optimized under both premixed and high-pressure spray combustion modes.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)

Article Thermodynamics

Performance of ammonia fuel in a spark assisted compression Ignition engine

Christine Mounaim-Rousselle et al.

Summary: Recent studies have demonstrated the feasibility of using ammonia in SI engines with an ignition booster. This study focuses on the performance and exhaust pollutants of premixed ammonia/air combustion in a Spark-Assisted Compression Ignition engine. The results show that neat ammonia can be used over a large operating range, driven by intake pressure and a classical ignition device with a high compression ratio.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2022)

Article Energy & Fuels

A study on split diesel injection on thermal efficiency and emissions of an ammonia/diesel dual-fuel engine

Amin Yousefi et al.

Summary: This study investigates the effect of split diesel injection strategy on an ammonia/diesel dual-fuel engine under medium load conditions. Results show that the use of split diesel injection strategy increases the thermal efficiency and reduces the unburned ammonia emissions. Two optimized split diesel injection strategies are suggested to reduce greenhouse gas emissions while improving combustion efficiency, although they result in higher nitrogen oxides emissions.
Article Energy & Fuels

An investigation on near-field and far-field characteristics of superheated ammonia spray

Shiyan Li et al.

Summary: This study investigates the spray characteristics of ammonia under different temperatures and densities, and establishes a non-dimensional analysis to quantitatively compare the key factors with bubble explosion intensity of different fuels. The results show that the superheat degree and fuel viscosity play significant roles in the spray evaporation process.
Article Energy & Fuels

A comparison between low- and high-pressure injection dual-fuel modes of diesel-pilot-ignition ammonia combustion engines

Tie Li et al.

Summary: Ammonia, as a carbon-free fuel, has great potential for decarbonization in marine engines. The dual-fuel mode can compensate for the poor combustion properties of ammonia. The study shows that in the low-pressure injection dual-fuel mode, the recommended maximum ammonia ratio is about 80% by energy, while the high-pressure injection dual-fuel mode has the potential to achieve a 97% diesel replacement ratio. Compared with the pure diesel mode, the high-pressure injection dual-fuel mode can reduce the equivalent CO2 emissions.

JOURNAL OF THE ENERGY INSTITUTE (2022)

Article Energy & Fuels

Flame stability and emissions characteristics of liquid ammonia spray co-fired with methane in a single stage swirl combustor

Ekenechukwu C. Okafor et al.

Summary: This study successfully conducted liquid ammonia spray combustion under preheated air conditions, demonstrating that preheated air can enhance the dispersion and evaporation of the liquid droplets, thereby reducing spray height and achieving stable combustion of liquid ammonia spray alone.
Article Energy & Fuels

Transcritical evaporation and micro-explosion of ethanol-diesel droplets under diesel engine-like conditions

Ping Yi et al.

Summary: The study focuses on the micro-explosion of blended ethanol-diesel droplets under diesel engine-like conditions, using a model to predict the bubble generation, growth, and explosion process. It is found that the heat transfer rate and superheat limit are predominant factors under low pressures, while the competition among evaporation rate, heating rate, transcritical transition, and bubble growth rate determines the micro-explosion under higher pressures.
Review Energy & Fuels

Review on Ammonia as a Potential Fuel: From Synthesis to Economics

A. Valera-Medina et al.

Summary: Ammonia as a fuel vector has been gaining interest and efforts are being made to find new methods to reduce carbon emissions. The current need to decarbonize the economy makes ammonia a viable fuel option, with economic implications being significant.

ENERGY & FUELS (2021)

Review Thermodynamics

Advancements of combustion technologies in the ammonia-fuelled engines

Meng-Choung Chiong et al.

Summary: Ammonia has become an attractive alternative fuel for power generation, showing potential in internal combustion engines and gas turbines. Different optimization strategies may be needed for different types of engines, such as increasing hydrogen mass fraction or utilizing multiple fuel injections. Partial premixed combustion has gained considerable interest in gas turbine research for its ability to operate at low equivalence ratios.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Laminar burning characteristics of ammonia/ hydrogen/air mixtures with laser ignition

Ning Wang et al.

Summary: This study investigates the laminar burning characteristics of premixed ammonia/hydrogen/air mixtures, aiming to explore effective ways to burn ammonia in engines. The experimental and simulation results show that the laminar burning velocity of ammonia mixtures increases at first, reaches a peak around an equivalence ratio of 1.1, and then decreases as the equivalence ratio increases from 0.7 to 1.4. The peak laminar burning velocities of the ammonia mixture are lower than 9 cm/s and are significantly lower than those of hydrocarbon fuels.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Thermodynamics

Investigation of ammonia and hydrogen as CO2-free fuels for heavy duty engines using a high pressure dual fuel combustion process

Stephanie Frankl et al.

Summary: The study focused on the use of ammonia and hydrogen in high-pressure-dual-fuel combustion, with results showing that hydrogen can be used in the engine without further modifications. Additionally, the combustion of ammonia was effective, especially when injected at higher pressures, and pre-heating of ammonia was found to increase combustion efficiency.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)

Article Mechanics

Numerical modelling of droplet breakup for flash-boiling fuel spray predictions

Christopher Price et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2020)

Article Energy & Fuels

NH3 as a Transport Fuel in Internal Combustion Engines: A Technical Review

Herry Lesmana et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2019)

Article Engineering, Mechanical

Diesel Fuel Multiple Injection Effects on Emission Characteristics of Diesel Engine Mixed Ammonia Gas Into Intake Air

Yoichi Niki et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2019)

Article Energy & Fuels

Scaling fuel sprays for different size diesel engines

Xinyi Zhou et al.

Article Thermodynamics

Quantitative observation on characteristics and breakup of single superheated droplet

Shiyan Li et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

Article Thermodynamics

A new flash boiling model for single droplet

Xi Xi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Transportation Science & Technology

Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure

Min Xu et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2013)

Review Thermodynamics

Flash-boiling atomization

Eran Sher et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)

Article Thermodynamics

Characteristics of gas-dissolved diesel fuel spray - (Spray characteristics and simulating flash polling process)

J Senda et al.

JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING (2000)