☆ 4.5 Article

Preparation and properties of lightweight, conformal, and load-bearing TiC/Si3N4 absorbing composites by gel casting

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Synthesis and electromagnetic wave absorption performances of a novel (Mo0.25Cr0.25Ti0.25V0.25)3AlC2 high-entropy MAX phase

Linjing Qiao et al.

Summary: In this study, a novel kind of high-entropy MAX phases powder was synthesized successfully using a newly proposed solid state reaction process. The oxidation products of the powder were examined, and the dielectric and electromagnetic wave absorption properties were tested. The as-synthesized powder exhibited excellent EM wave absorption performances and could maintain good absorption properties after oxidation in a certain frequency range.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Environmental

A synergistic route of heterointerface and metal single-atom configurations towards enhancing microwave absorption

Zhihao Sun et al.

Summary: Derivatized multi-void composite microplates (CoNXC) with high-efficient electromagnetic wave absorption (EMA) were successfully fabricated using a two-step pyrolysis process assisted by molten dual-salt-mediated template. N-doping modulated the bonding configurations of Co/N atoms, enhancing dielectric loss capacity. CoNXC exhibited high EMA performance even with high filler loading and outperformed most reported derivatized carbon-based composites.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Manufacturing

Preparation and properties of Si3N4 ceramics via digital light processing using Si3N4 powder coated with Al2O3-Y2O3 sintering additives

Meng Li et al.

Summary: In this study, Si3N4 ceramics were successfully fabricated by DLP technology using Si3N4 powder coated with Al2O3-Y2O3 sintering additives. The research systematically studied the effects of the coating amount of sintering additives on the properties of the ceramics. The results provide an experimental basis for DLP forming Si3N4 and other non-oxide ceramics.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ni/C-Carbon Nanotube Multidimensional Heterospheres for Highly Efficient Microwave Absorbers

Hongshou Liu et al.

Summary: This study proposes a strategy for fabricating carbon nanotube-based composites with multidimensional heterostructures as efficient microwave absorbers. The cocklebur-like Ni/C-CNT heterosphere obtained by a simple method exhibits the synergy of multiple loss mechanisms and improves impedance matching.

ACS APPLIED NANO MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ synthesis mechanism of double core/rim structure Ti(C,N)-based cermets prepared by reactive hot pressing

Yanqiu Huo et al.

Summary: This study synthesized in situ Ti(C,N)-based cermets and explored the reaction mechanism. The results revealed the formation process of Ti(C,N) particles with different structures through a series of reactions. The performance of the cermets improved with increasing sintering temperature.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Energy & Fuels

A review on viscosity retention of PAM solution for polymer flooding technology

Juan Du et al.

Summary: This study introduces the importance of polyacrylamide in polymer flooding technology, researches its degradation mechanism and viscosity stabilization strategies, and proposes that modifying PAM by introducing functional monomers is an effective strategy to maintain its viscosity. Combining chemicals resistant to free radical degradation can further reduce viscosity loss and enhance oil recovery.

PETROLEUM SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Targeted design and analysis of microwave absorbing properties in iron-doped SiCN/Si3N4 composite ceramics

Xiao Lin et al.

Summary: The SiCN(Fe)/Si3N4 composite ceramics with C, beta-SiC and alpha-Fe were designed to form conductive networks, improving charge storage and transport capacity, and enhancing dielectric properties. The material showed excellent electromagnetic wave absorption performance in a specific frequency range.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electromagnetic wave absorbing properties of TMCs (TM=Ti, Zr, Hf, Nb and Ta) and high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C

Yanchun Zhou et al.

Summary: EMW absorbing materials are crucial for modern communication technologies, with a focus on composites and nanostructures to enhance performance. However, there is also growing interest in single-phase materials with stability and superior absorption properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Dual heteroatoms co-doping strategy of graphene-based dielectric loss electromagnetic absorbent

Zhihao Sun et al.

Summary: This paper systematically investigates the modulation of microwave absorption performance through diatomic co-doping, demonstrating that NS-rGO and SB-rGO exhibit enhanced impedance matching characteristics and electromagnetic attenuating capability. The results offer deep insight into the relationship among dual atoms co-doping, dielectric performance, and microwave absorption property.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Porous SiC-Si3N4 composite ceramics with excellent EMW absorption property prepared by gelcasting using DMAA

Shuang Yin et al.

Summary: In this study, porous SiC-Si3N4 composite ceramics with excellent EMW absorption performance were prepared by pre-oxidizing Si3N4 powders. The pre-oxidation improved rheological properties, suppressed pore defects, and enhanced mechanical and electromagnetic properties. The ceramics showed optimal EMW absorption properties and potential applications in EMW absorption fields.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Cup-stacked carbon nanotubes hybridized Si3N4/Si3N4 composite ceramics for high-effciency microwave absorption with excellent thermal stability

Fang Ye et al.

Summary: The hybridization of carbon nanotubes (CNTs) with Si3N4 to create CSCNT-Si3N4/Si3N4 composite ceramics allows for efficient microwave absorption with a very low filler loading, while also providing protection against oxidation for CNTs. This innovative approach demonstrates strong microwave absorption performance and long-term stability in high-temperature conditions.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Simultaneous improvement in porosity and strength of porous β-Si3N4 ceramics by formation of ultrafine fibrous grains

Qiang Zhi et al.

Summary: This study successfully developed highly porous Si3N4 ceramic monoliths composed of ultrafine fibrous grains with high flexural strength through a novel vapor-solid carbothermal reduction nitridation reaction. By controlling the content of alpha-Si3N4 diluents and density of CNT green bodies, porous Si3N4 monoliths with porosity ranging from 61-78% were achieved.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Enhancement of thermal shock resistance in β-Si3N4 coating with in situ synthesized β-Si3N4 nanowires/nanobelts on porous Si3N4 ceramics

Chao Wang et al.

Summary: A dense beta-Si3N4 coating toughened by beta-Si3N4 nanowires/nanobelts was prepared using a combined technique of chemical vapor deposition and reactive melt infiltration to improve thermal shock resistance. The coating exhibited high fracture toughness and maintained high residual strength ratio after thermal cycling, showing potential for applications in extreme high temperature environments.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of in-situ Ti(C,N) phase toughened Al2O3 based ceramics from natural bauxite

Ziyan Li et al.

Summary: Al2O3-Ti(C,N) ceramics were fabricated using high-titania special-grade bauxite as raw material via carbothermal reduction nitridation method. The in-situ formation of Ti(C,N) phase improved the mechanical properties of the materials, leading to increased hardness and flexural strength.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Ceramics

Silica-based ceramics toward electromagnetic microwave absorption

Xiaojun Zeng et al.

Summary: Silica-based ceramics have been widely explored as versatile materials in various fields, but there is limited comprehensive information on their electromagnetic microwave absorption capabilities. This review summarizes recent progress in the investigation of silica-based ceramics for EMW absorption, covering their characteristics, synthesis methods, absorption properties, and future prospects. The focus is on structure and component design to achieve advancements in this field.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Sandwich-like SiCnw/C/Si3N4 porous layered composite for full X-band electromagnetic wave absorption at elevated temperature

Shanshan Xiao et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of Ti(C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti(C, N) ceramic tool material

Ning Sun et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Toward the Application of High Frequency Electromagnetic Wave Absorption by Carbon Nanostructures

Qi Li et al.

ADVANCED SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Temperature Oxidation-Resistant ZrN0.4B0.6/SiC Nanohybrid for Enhanced Microwave Absorption

Xian Jian et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Engineering, Environmental

Synthesis of lightweight N-doped graphene foams with open reticular structure for high-efficiency electromagnetic wave absorption

Panbo Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Engineering, Environmental

3D-printed oblique honeycomb Al2O3/SiCw structure for electromagnetic wave absorption

Hui Mei et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Reduced Graphene Oxide/Silicon Nitride Composite for Cooperative Electromagnetic Absorption in Wide Temperature Spectrum with Excellent Thermal Stability

Zexin Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multifunctional Organic-Inorganic Hybrid Aerogel for Self-Cleaning, Heat-Insulating, and Highly Efficient Microwave Absorbing Material

Ya Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Engineering, Environmental

Thermostable SiCO@BN sheets with enhanced electromagnetic wave absorption

Yongzhao Hou et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Electromagnetic wave absorption and mechanical properties of silicon carbide fibers reinforced silicon nitride matrix composites

Ran Mo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fe3O4 Nanoflower-Carbon Nanotube Composites for Microwave Shielding

Xiaojun Zeng et al.

ACS APPLIED NANO MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Growth of Edge-Rich Graphene with Tunable Dielectric Properties in Porous Si3N4 Ceramic for Broadband High-Performance Microwave Absorption

Fang Ye et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

SiC nanofibers modified Si3N4 ceramics for improved electromagnetic interference shielding in X-band

Wei Zhou et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Enhanced high-temperature dielectric properties and microwave absorption of SiC nanofibers modified Si3N4 ceramics within the gigahertz range

Wei Zhou et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and properties of in situ silicon nitride nanowires reinforced porous silicon nitride (SNNWs/SN) composites

Duan Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermally Driven Transport and Relaxation Switching Self-Powered Electromagnetic Energy Conversion

Maosheng Cao et al.

SMALL (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Extended Working Frequency of Ferrites by Synergistic Attenuation through a Controllable Carbothermal Route Based on Prussian Blue Shell

Wei Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphene Shield by SiBCN Ceramic: A Promising High-Temperature Electromagnetic Wave-Absorbing Material with Oxidation Resistance

Chunjia Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Materials Science, Ceramics

In situ growth of one-dimensional nanowires on porous PDC-SiC/Si3N4 ceramics with excellent microwave absorption properties

Wenhu Hong et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible and Thermostable Graphene/SiC Nanowire Foam Composites with Tunable Electromagnetic Wave Absorption Properties

Meikang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

In-situ synthesis of hierarchically porous and polycrystalline carbon nanowires with excellent microwave absorption performance

Hongxing Pan et al.

CARBON (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering

Xuejin Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Ceramics

Dielectric properties of Cf-Si3N4 sandwich composites prepared by gelcasting

Heng Luo et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Chemistry, Physical

Preparation of titanium carbide nanowires for application in electromagnetic wave absorption

Xiaoyan Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Jia-Min Wu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

Development and mechanical characterization of novel ceramic foams fabricated by gel-casting

J. -M. Tulliani et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive

Xiaoming Duan et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering

Xiangming Li et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former

Yongfeng Xia et al.

CERAMICS INTERNATIONAL (2011)

添加到收藏夹

Article Chemistry, Physical

Dielectric response of carbon coated TiC nanocubes at 2-18 GHz frequencies

H. Meng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings

Li Chen et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.