Significant step towards efficient electrical discharge machining titanium alloys

There have been high demands of high-quality, highly efficient processing methodologies on difficult-to-cut titanium alloys. The current methods for dealing with this kind of materials are mainly mechanical cutting ones. However, because of high processing costs, poor surface qualities, and restrictive machining operations, the costs of mechanical cutting methods are high. Electrical discharge machining (EDM), because of its flexibility, was considered as a supplement. However, serious difficulties arose while machining titanium alloys by EDM. Because of low thermo-conductivity of titanium alloys, the liquid temperature in gap between electrode and workpiece rose quickly after a series of pulse discharges. The high temperature of gap liquid usually led to gap liquid breakdown strength to decline. The consequence was discharging pulses tended out to be stable arc pulses or short pulses, burning workpiece surface and wearing electrode. The machining process became unstable. The low thermal conductivity of titanium alloys was the inherent property which could be hardly changed, and at present, the only way to settle the hard-to-cut problem of machining titanium alloys by EDM was to seek a way to keep gap liquid breakdown strength not go down so fast but still be suitable for effective pulse discharges. To solve this problem, this paper first listed three conditions to be met and analyzed the reasons to affect gap liquid breakdown strength in detail and concluded with three factors, gap distance, amount of chips left in gap, and gap liquid deionization after pulse discharges and then came up with a proposition to the problem. Technically, the proposition was accomplished by constructing a multiple-variable adaptive control system in which gap servo-voltage proportional to gap distance was in charge of discharging extent of pulses, electrode-discharging time decided the amount of chips produced in an electrode discharging cycle, and pulse-off time decided gap liquid deionization after discharges. These variables were timely regulated to keep the liquid breakdown strength suitable for discharging and meanwhile avoiding arcing in machining. The verification test demonstrated that the multivariable control system really helped electrical discharge machining titanium alloys in severe machining situations and proved its usefulness in applications.

Automated summary

To solve the difficulties of EDM machining of titanium alloys, a multivariable adaptive control system was proposed in this study. This system regulated variables such as gap voltage, electrode-discharging time, and pulse-off time to maintain suitable liquid breakdown strength for effective discharges and prevent arcing during machining. Verification tests showed that this control system was effective in severe machining situations and proved its usefulness in practical applications.