☆ 4.6 Article

Theoretical and experimental investigations of tool wear in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Study on Cutting Force and Tool Wear in Machining of Die Materials with Textured PCD Tools Under Ultrasonic Elliptical Vibration

Sangjin Maeng et al.

Summary: Machining of steel-based alloy and tungsten carbide is challenging due to their hardness. Texturing on the rake face of the tool and ultrasonic elliptical vibration cutting (UEVC) can prolong tool life by reducing wear. This study investigates the cutting performance and tool wear in machining die materials with textured polycrystalline diamond tools under UEVC. The experiments show that UEVC reduces cutting force and improves tool life.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2023)

添加到收藏夹

Article Automation & Control Systems

Green ceramic machining benefits through ultrasonic-assisted turning: an experimental investigation

Marcos Goncalves Junior et al.

Summary: Ultrasonic-assisted machining on ceramic materials in a green state improves surface finish, reduces machining forces, and decreases tool wear. Compared to conventional turning, ultrasonic-assisted turning provides process benefits through improved surface finish, reduced tool flank wear, and decreased machining forces, when cutting parameters are properly set.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigation on magnesium AZ31B alloy during ultrasonic vibration assisted turning process

Neeraj Deswal et al.

Summary: The study showed that during the machining of magnesium AZ31B alloy, UVAT process significantly reduces machining forces and surface roughness compared to CT, but results in higher machining temperature, chip segmentation, finer grains, and higher microhardness.

MATERIALS AND MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Machinability improvement in three-dimensional (3D) ultrasonic vibration assisted diamond wire sawing of SiC

Lutao Yan et al.

Summary: In this study, a novel 3D vibration assisted diamond wire sawing (DWS) system is developed and a theoretical model is established for predicting sawing forces. Experiments on silicon carbide (SiC) ceramics are carried out to investigate the effects of ultrasonic vibration assistance, input vibration direction, and cutting parameters on sawing forces, surface morphologies, and tool wear. The results show that 3D ultrasonic vibration provides the lowest sawing force, improved surface integrity, and reduced wear of the diamond wire saw.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Tool Wear Effect on Surface Integrity in AISI 1045 Steel Dry Turning

Laurence Colares Magalhaes et al.

Summary: This study evaluated the surface integrity and flank wear of uncoated cermet inserts in dry turning of AISI 1045 steel. Cutting speed and feed were varied and their effects on surface quality were analyzed. It was found that feed had a greater influence on the turned surface quality than cutting speed. The surface was significantly damaged with the progression of insert flank wear. Abrasive wear was the predominant wear mechanism observed in the experiments.

MATERIALS (2022)

添加到收藏夹

Article Automation & Control Systems

Evaluation of micro-textured tool performance in ultrasonic elliptical vibration-assisted turning of 304 stainless steel

Mustapha Mukhtar Usman et al.

Summary: This paper investigates the performance capability of micro-textured cutting tools in nonconventional cutting processes. The results showed that the combination of UEVC mechanism and cutting tool texturing techniques can significantly enhance the cutting performance.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting

Zhimeng Chen et al.

Summary: This study demonstrates that the cutting performance of Bulk Metallic Glasses can be enhanced only within a carefully-determined window of ultrasonic amplitude. An excessive ultrasonic amplitude may violate the cutting performance.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study on cutting force in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

Yingshuai Xu et al.

Summary: This paper discusses the generation mechanism of cutting force in ultrasonic vibration assisted turning (UAT) and establishes a cutting force model based on the mechanism of UAT. A force measuring test system is designed and contrast experiments for stainless steel workpieces are conducted to analyze the influence of ultrasonic vibration and technological parameters on cutting force. It is found that ultrasonic vibration significantly reduces cutting force, and cutting parameters play a crucial role in controlling the machining process.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Industrial

Subsurface damage and burr improvements of aramid fiber reinforced plastics by using longitudinal-torsional ultrasonic vibration milling

Jie Xu et al.

Summary: This study applied longitudinal-torsional ultrasonic vibration milling to improve the machining quality of AFRPs, successfully addressing issues such as burrs and subsurface damage. The establishment of a cutting numerical model for AFRPs opened up a new avenue for the machining of tough composites. Experimental and theoretical results were in good agreement, with the numerical model providing a more in-depth insight into the experimental image.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Ultrasonic vibration-assisted turning of Titanium alloy Ti-6Al-4V: numerical and experimental investigations

Rudranarayana Kandi et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Theoretical and experimental investigations of surface roughness, surface topography, and chip shape in ultrasonic vibration-assisted turning of Inconel 718

Yingshuai Xu et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Effect of cutting edge modification on the tool flank wear in ultrasonically assisted turning of hardened steel

Masoud Farahnakian et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)

添加到收藏夹

Editorial Material Engineering, Mechanical

Vibration assisted machining

Dehong Huo et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Development of a friction model based on oblique cutting theory

Mohammad Lotfi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Thermodynamics

Experimental study on chip shape in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

Yingshuai Xu et al.

ADVANCES IN MECHANICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Theoretical and numerical modeling of tool-chip friction in ultrasonic-assisted turning

Mohammad Lotfi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Tool Wear Prediction and Surface Improvement in Vibration Cutting

Mohammad Lotfi et al.

TRIBOLOGY TRANSACTIONS (2018)

添加到收藏夹

Article Acoustics

3D FEM simulation of tool wear in ultrasonic assisted rotary turning

Mohammad Lotfi et al.

ULTRASONICS (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Tool wear modeling in rotary turning modified by ultrasonic vibration

Mohammad Lotfi et al.

SIMULATION MODELLING PRACTICE AND THEORY (2018)

添加到收藏夹

Article Acoustics

Research on an Ultrasonic Cutting Device Based on 0Cr18Ni9

San Hongjun et al.

SHOCK AND VIBRATION (2018)

添加到收藏夹

Article Engineering, Manufacturing

Investigation on diamond tool wear in ultrasonic vibration-assisted turning die steels

Lai Zou et al.

MATERIALS AND MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Mechanical

Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels

Janaina Geisler Correa et al.

TRIBOLOGY INTERNATIONAL (2017)

添加到收藏夹

Article Automation & Control Systems

Tool wear mechanisms in the machining of steels and stainless steels

Anselmo Eduardo Diniz et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Evaluation for tool flank wear and its influences on surface roughness in ultra-precision raster fly cutting

Guoqing Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Acoustics

Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V

Sandip Patil et al.

ULTRASONICS (2014)

添加到收藏夹

Article Engineering, Manufacturing

Diamond Tool Wear in Precision Turning of Titanium Alloy

Yuanliang Zhang et al.

MATERIALS AND MANUFACTURING PROCESSES (2013)

添加到收藏夹

Article Engineering, Mechanical

Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining

Y. Kaynak et al.

WEAR (2013)

添加到收藏夹

Article Acoustics

An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting

V. Ostasevicius et al.

JOURNAL OF SOUND AND VIBRATION (2010)

添加到收藏夹

Article Engineering, Industrial

Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel

M. Anthony Xavior et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

Effect of machining parameters in ultrasonic vibration cutting

Chandra Nath et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

添加到收藏夹

Article Engineering, Industrial

Tool wear and surface finish in diamond cutting of optical glass

M Zhou et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Industrial

The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel

AS Kumar et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Manufacturing

The effect of tool geometry on regenerative instability in ultrasonic vibration cutting

M Xiao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

添加到收藏夹

Article Acoustics

Ultrasonically assisted turning of aviation materials: simulations and experimental study

VI Babitsky et al.

ULTRASONICS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.