☆ 4.6 Article

Enhancement of Macromixing Performance of a Stirred Tank with a Novel V-Shaped Punched Baffle

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Effect of impeller type and scale-up on spatial distribution of shear rate in a stirred tank

Huina Wang et al.

Summary: This study presents the main spatial distribution features of shear rate in a stirred tank operated with five different radial and axial flow impellers using particle image velocimetry (PIV) experiments. The average shear rate in the whole tank and the local value near the impeller both increase linearly with impeller speed. The shear coefficient at the impeller outlet is linearly related to the impeller flow number and decreases with the increase of impeller flow number at constant power consumption per unit volume. Computational fluid dynamics (CFD) results show that the volume-averaged shear rate decreases faster for a Reactor Design for Tolerance (RDT) impeller compared to other impellers with the same impeller tip velocity during scale-up based on constant power consumption per unit volume and geometric similarity. The novel multi-blade combined (MBC) impeller with an increased height-to-diameter ratio improves the distribution uniformity of shear rate at the same power consumption per unit volume after scale-up. These studies provide a data basis for selecting impeller types and improving the shear rate environment in large-scale stirred tanks.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Influence of viscosity on gas holdup formation in stirred tank reactors

Tomas Kracik et al.

Summary: Mechanically agitated vessels serving as gas-liquid stirred tank reactors are commonly used in the global chemical, biochemical, pharmaceutical, and food industry, with gas flow increasing liquid level and gas holdup being a key characteristic influenced by vessel and impeller geometry, operational conditions, and chemical properties. This work focuses on the viscosity influence on gas holdup formation in laboratory and pilot plant stirred tank reactors at a wide range of experimental conditions, testing the impact of gas flow rate, impeller type, impeller diameter, batch viscosity, and other operational conditions. Broad experimental conditions were used to establish chemical engineering correlations for design and scale up.

CHEMICAL PAPERS (2022)

添加到收藏夹

Article Engineering, Chemical

An effectiveness factor model for slurry phase olefin polymerizations

Shuaifeng Zhang et al.

Summary: The multigrain model (MGM) is commonly used for olefin polymerization research, but its detailed modeling of intraparticle transport is not suitable for multiphase CFD simulations. To address this issue, the effectiveness factor model (EFM) is developed based on the MGM, which can be used in multiphase CFD simulations. The EFM is validated and compared with the MGM, showing similar results with lower computation cost for olefin slurry polymerization when alpha(i,mp) < 2.0.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

Power number and hydrodynamic characterization of a stirred vessel equipped with a Retreat-Blade Impeller and different types of pharmaceutical single baffles

Chadakarn Sirasitthichoke et al.

CHEMICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Engineering, Chemical

CFD simulation of flow and mixing characteristics in a stirred tank agitated by improved disc turbines

Zhuotai Jia et al.

Summary: In order to reduce power consumption and improve mixing performance in stirred tanks, two improved disc turbines were developed and studied using computational fluid dynamics (CFD) simulations. The results showed that the improved turbines had lower power consumption and higher pumping efficiency compared to traditional turbines, and their mixing performance was superior to other types of turbines under the same power consumption.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

The effect of baffle on flow structures and dynamics stirred by pitch blade turbine

Ying Fan et al.

Summary: The experimental results indicate that in an unbaffled tank, an independent circulation area forms under the impeller, while the addition of a baffle enhances axial discharge of fluid and alters flow structures, leading to better diffusion and mixing in the whole stirred tank.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

添加到收藏夹

Article Engineering, Chemical

Investigation of the flow patterns and power requirements in agitated systems: effects of the design of baffles and vessel base

Mohammed Foukrach et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Improved mixing of solid suspensions in stirred tanks with interface baffles: CFD simulation and experimental validation

Arjun Kumar Pukkella et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Effect of baffles shape on the flow patterns and power consumption in stirred vessels

Mohammed Foukrach et al.

SN APPLIED SCIENCES (2019)

添加到收藏夹

Article Engineering, Chemical

Experimental and CFD studies of floc growth dependence on baffle width in square stirred-tank reactors for flocculation

Weipeng He et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Continuous reactive crystallization of pharmaceuticals using impinging jet mixers

Wen J. Liu et al.

AICHE JOURNAL (2017)

添加到收藏夹

Article Engineering, Mechanical

Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine

Youcef Kamla et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Chemical

LIQUID FLOW IN IMPELLER SWEPT REGIONS OF BAFFLED AND UNBAFFLED VESSELS WITH A TURBINE-TYPE AGITATOR

M. Yoshida et al.

BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2015)

添加到收藏夹

Article Mechanics

Numerical study of the performance of multistage Scaba 6SRGT impellers for the agitation of yield stress fluids in cylindrical tanks

Houari Ameur et al.

JOURNAL OF HYDRODYNAMICS (2015)

添加到收藏夹

Article Engineering, Chemical

EFFECT OF SOME DESIGN PARAMETERS ON THE FLOW FIELDS AND POWER CONSUMPTION IN A VESSEL STIRRED BY A RUSHTON TURBINE

Sarra Youcefi et al.

CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA (2013)

添加到收藏夹

Article Engineering, Chemical

Laminar mixing performances of baffling, shaft eccentricity and unsteady mixing in a cylindrical vessel

K. C. Ng et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Numerical simulation of the effects of baffle on flow field in a stirred tank

Zongrui Hao et al.

THERMAL, POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2 (2013)

添加到收藏夹

Article Engineering, Chemical

Mixing and Dissolution Processes of Pharmaceutical Bulk Materials in Stirred Tanks: Experimental and Numerical Investigations

Thomas Hoermann et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Engineering, Chemical

Experimental determination and numerical simulation of mixing time in a gas-liquid stirred tank

Qinghua Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of vessel baffling on the drawdown of floating solids

Joanna Karcz et al.

CHEMICAL PAPERS (2009)

添加到收藏夹

Article Engineering, Chemical

Experimental Studies and CFD Modeling on the Effects of a Cut in the Baffle on Power Consumption

Palani Sivashanmugam et al.

CHEMICAL PRODUCT AND PROCESS MODELING (2009)

添加到收藏夹

Article Engineering, Environmental

CFD modelling of continuous precipitation of barium sulphate in a stirred tank

Z Jaworski et al.

CHEMICAL ENGINEERING JOURNAL (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.