4.7 Article

A Compact Sensor Integrated in a Single Hollow Core Bragg Fiber for Simultaneous Measurement of Temperature and Strain

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Sensitivity-enhanced temperature sensor utilizing core offset and hollow core Bragg fiber

Xiaonan Zhao et al.

Summary: A novel sensitivity-enhanced optical fiber temperature sensor utilizing core offset and hollow core Bragg fiber has been proposed and experimentally investigated. The sensor, consisting of a hollow core Bragg fiber sandwiched between two single-mode fibers, enhances temperature sensitivity by exciting inter-modal interference through lateral offset splicing fibers. The unique four-cladding structure of hollow core Bragg fiber induces periodic interference envelopes in the transmission spectrum, allowing monitoring of changes in the external environment. Experimental results demonstrate high temperature and strain sensitivities, making the sensor suitable for applications in complex environments such as aerospace.

OPTICAL FIBER TECHNOLOGY (2023)

Article Chemistry, Analytical

Highly Sensitive Strain Sensor by Utilizing a Tunable Air Reflector and the Vernier Effect

Farhan Mumtaz et al.

Summary: A highly sensitive strain sensor based on tunable cascaded Fabry-Perot interferometers is proposed and experimentally demonstrated. The sensor exhibits optimum strain sensitivity and ultra-low temperature sensitivity, providing good performance for strain sensing.

SENSORS (2022)

Article Engineering, Electrical & Electronic

Temperature Compensated Magnetic Field Sensor Using Magnetic Fluid Filled Exposed Core Microstructure Fiber

Qi Yu et al.

Summary: A temperature compensated magnetic field sensor using exposed core fiber filled with magnetic fluid is proposed to detect magnetic field strength and temperature simultaneously. The sensor shows good response to MFT and is suitable for industrial flaw detection, aerospace, and medical applications.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

Review Materials Science, Multidisciplinary

Emerging Applications of Optical Fiber-Based Devices for Brain Research

Roya Nazempour et al.

Summary: Research in neuroscience and neuroengineering has seen a surge of interest in recent decades. Optical fiber based technologies offer a viable and versatile tool for studying the brain, with potential applications in clinical settings. The small size, flexibility, and light weight of optical fibers make them ideal for understanding complex behaviors in living mammals.

ADVANCED FIBER MATERIALS (2022)

Article Biophysics

Brain neurochemical monitoring

Yuqian Zhang et al.

Summary: Brain neurochemical monitoring utilizing microfabricated electrochemical and optical spectroscopy sensing technologies enables continuous and accurate measurements of brain biomarkers, facilitating advancements in neuroscience for clinical applications. Recent progress in sampling, electrochemistry, and optical spectroscopy for brain neurochemical monitoring is highlighted, addressing existing gaps and future directions for designing industry standard devices.

BIOSENSORS & BIOELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Temperature and Strain Sensing With Hybrid Interferometer

Lashari Ghulam Abbas et al.

Summary: The study presents a hybrid interferometer design that utilizes a combination of different fiber types to achieve simultaneous measurement of strain and temperature. Experimental results demonstrate that the hybrid interferometer has high sensitivity and can be widely applied in various fields.

IEEE SENSORS JOURNAL (2021)

Article Optics

Ultra-compact in-core-parallel-written FBG and Mach-Zehnder interferometer for simultaneous measurement of strain and temperature

Ke Tian et al.

Summary: An ultra-compact in-core-parallel-written fiber Bragg grating (FBG) and Mach-Zehnder interferometer (MZI) are developed for simultaneous measurement of strain and temperature. The individual extinction ratios of FBG and MZI are traded off by optimizing their writing positions and separations. Experimental results show that this device has different sensitivities for strain and temperature, making it a promising candidate for industrial measurements.

OPTICS LETTERS (2021)

Article Optics

A spiral-polished fiber sensor for strain and temperature measurement

Yiwei Ma et al.

Summary: The study proposes and experimentally investigates a spiral-polished single-multi-single-mode (SP-SMS) fiber sensor for simultaneous measurement of strain and temperature, showing high sensitivity in both measurements. The sensor is inexpensive, easy to fabricate, and has a compact structure.

APPLIED PHYSICS B-LASERS AND OPTICS (2021)

Article Engineering, Electrical & Electronic

Simultaneous measurement of strain and temperature by inscribing a paired LPGs on a pre-tapered fiber

Mustafa Bilsel et al.

Summary: The newly designed all-fiber sensor employs a dual-LPG structure and electric arc technique to measure strain and temperature simultaneously. Experimental results demonstrate high sensitivity and advantages such as simple fabrication, low cost, and no splicing joints.

OPTICAL AND QUANTUM ELECTRONICS (2021)

Article Chemistry, Analytical

Highly Sensitive Dual Parameter Sensor Based on a Hybrid Structure with Multimode Interferometer and Fiber Bragg Grating Fabricated by Femtosecond Laser

Xinran Dong et al.

Summary: A hybrid sensing configuration for simultaneous measurement of strain and temperature using fiber Bragg grating (FBG) in an offset multimode fiber (MMF) interferometer has been proposed and demonstrated. The sensor shows high sensitivity and resolution, making it attractive for dual-parameter sensing applications.

SENSORS (2021)

Article Optics

Simultaneous measurement of strain and temperature using Fabry?P?rot interferometry and antiresonant mechanism in a hollow-core fiber

Chong He et al.

Summary: A fiber-optic sensor for simultaneous measurement of strain and temperature is proposed, based on FP interference and AR mechanism. The sensor shows high temperature sensitivity and strain sensitivity, indicating stability and reliability in measurements.

CHINESE OPTICS LETTERS (2021)

Article Engineering, Electrical & Electronic

A high sensitivity optical fiber strain sensor based on hollow core tapering

Leigang Dong et al.

OPTICAL FIBER TECHNOLOGY (2020)

Article Engineering, Electrical & Electronic

Cascaded Two-Core PCFs-Based In-Line Fiber Interferometer for Simultaneous Measurement of Strain and Temperature

Khurram Naeem et al.

IEEE SENSORS JOURNAL (2019)

Article Engineering, Electrical & Electronic

Simultaneous Measurement of Strain and Temperature With a Few-Mode Fiber-Based Sensor

Chenxu Lu et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2018)

Article Engineering, Electrical & Electronic

Highly Integrated FP/FBG Sensor for Simultaneous Measurement of High Temperature and Strain

Qin Liu et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2014)

Article Engineering, Electrical & Electronic

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Zhigang Cao et al.

IEEE SENSORS JOURNAL (2013)

Article Optics

Temperature-insensitive fiber-optic devices using multimode interference effect

Saurabh Mani Tripathi et al.

OPTICS LETTERS (2012)

Article Engineering, Electrical & Electronic

Strain and Temperature Sensing Characteristics of Single-Mode-Multimode-Single-Mode Structures

Saurabh Mani Tripathi et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2009)

Article Optics

Thermo-optic controllable hybrid photonic polymers containing inorganic nanoparticles

Yu Kurata et al.

JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS (2009)