☆ 4.7 Article

Three-dimensional characterisation of pore networks and fluid flow in segregated heaps in the presence of crushed ore and agglomerates

HYDROMETALLURGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Properties governing flow of solution and air through crushed ore for heap leaching: Part II unsaturated dual-phase flow

S. W. Robertson et al.

Summary: The heap leaching of low-grade ores is limited by the water conditions of the bed, and previous studies have found that the hydraulic conductivity function can be modeled using traditional capillary models at lower moisture contents. Additionally, the function can be modeled as a discontinuous J-curve rather than a continuous one. The empirical rule of a maximum void saturation of 65% for heap aeration aligns with experimental data on average.

HYDROMETALLURGY (2023)

添加到收藏夹

Article Engineering, Chemical

Copper sulfides leaching assisted by acidic seawater-based media: Ionic strength and mechanism

Leiming Wang et al.

Summary: The paper critically discusses the utilization of acidic seawater-based media (ASM) in copper hydrometallurgical industries, highlighting its catalytic effects in chemical/bio leaching processes. It also explores the pivotal ions and compounds present in ASM, their regeneration behavior, and the impact on redox potential, reaction activation energy, and leaching kinetics. Furthermore, the potential of ASM as an alternative to freshwater for accelerating copper sulfide leaching in water-scarce areas is highlighted based on previous studies and reviews.

MINERALS ENGINEERING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Tortuosity prediction and investigation of fluid flow behavior using pore flow approach in heap leaching

Sina Maghsoudy et al.

Summary: The aim of this study was to use the pore flow approach to model the fluid dynamics of heap leaching and predict the permeability of porous media using a novel method. Experimental and numerical modeling results showed that the velocity and pressure distribution in the media corresponded to the pore flow approach, and were strongly influenced by the shape and arrangement of the ore particles. A semi-empirical function was proposed for predicting tortuosity in porous media using a coupled numerical modeling and image processing approach.

HYDROMETALLURGY (2022)

添加到收藏夹

Article Engineering, Chemical

HeapSim2D-A 2D axisymmetric model of heap leaching under drip emitters I. Hydrology and solute transport

David G. Dixon et al.

Summary: Research shows that in heap leaching processes, the capillary head parameter hc,0 is the key factor determining the extent of solution spreading under drip emitters. Ores with high capillarity will spread the solution effectively, while ores with low capillarity will confine the flow mostly to a channel below the drip emitter. Additionally, even ores with high capillarity will have a significant unwetted zone at the top of the heap or column.

MINERALS ENGINEERING (2022)

添加到收藏夹

Article Geochemistry & Geophysics

Hydrodynamic Hysteresis and Solute Transport in Agglomerated Heaps under Irrigation, Stacking, and Bioleaching Controlling

Leiming Wang et al.

Summary: This study investigates the hydrodynamic hysteresis in agglomerated heaps and its impact on solute transport and leaching reactions. The results show that under acidic leaching conditions, the proportion of mobile liquid increases. The dynamic liquid retention is more influenced by the diameter of packed feeds and superficial flow rate rather than leaching reactions. Solute retention is longer under slower flow rates and smaller packed feed diameters, which improves copper leaching efficiency.

MINERALS (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Ore agglomeration behavior and its key controlling factors in heap leaching of low-grade copper minerals

Leiming Wang et al.

Summary: The study reviews the significance of ore agglomeration for copper metal recovery and the impact of agglomeration behavior on leaching reactions, discussing key factors and parameters, quality evaluation and process control, as well as mass transfer, dual pore structure, and flow behavior.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure evolution of chalcopyrite agglomerates during leaching - A synchrotron-based X-ray CT approach combined with a data-constrained modelling (DCM)

Xiyu Gao et al.

Summary: This study used synchrotron X-ray CT and data-constrained modelling to investigate the properties and evolution of pore networks of chalcopyrite-dominant agglomerates during leaching, revealing a strong dependence of copper recovery on the interior structures of agglomerates. Sufficient binding capacity was found to be essential for maintaining agglomerate structure.

HYDROMETALLURGY (2021)

添加到收藏夹

Article Geochemistry & Geophysics

Understanding the Effect of Stepwise Irrigation on Liquid Holdup and Hysteresis Behavior of Unsaturated Ore Heap

Leiming Wang et al.

Summary: The study found that relative porosity was negatively correlated with particle size, increasing irrigation rate significantly increased liquid retention, while residual liquid holdup was commonly influenced by porosity and relative liquid holdup.

MINERALS (2021)

添加到收藏夹

Article Engineering, Civil

Intra-pore tortuosity and diverging-converging pore geometry controls on flow enhancement due to liquid boundary slip

A. T. M. Shahidul Huqe Muzemder et al.

Summary: The study reveals that the microscopic flow behavior in porous media is significantly influenced by pore geometry and intra-pore tortuosity, affecting boundary slip reaction and flow enhancement factor.

JOURNAL OF HYDROLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Hydrodynamic nonlinear response of interacting integrable systems

Michele Fava et al.

Summary: The study establishes a formalism for computing the nonlinear response of interacting integrable systems, showing results that are asymptotically exact in the hydrodynamic limit. Spatially resolved nonlinear responses can distinguish interacting integrable systems from noninteracting ones, with a method for computing finite-temperature Drude weights and identifying nonperturbative regimes of the nonlinear response.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2021)

添加到收藏夹

Article Physics, Fluids & Plasmas

Capillary and viscous fracturing during drainage in porous media

Francisco J. Carrillo et al.

Summary: The study investigates the transition from fluid invasion to fracturing in soft porous media under various conditions, using a newly developed multiphase Darcy-Brinkman-Biot framework. Three distinct material failure regimes were identified, controlled by nondimensional numbers quantifying the balance of viscous, capillary, and structural forces. This study effectively decouples the effects of viscous and capillary forces on fracturing mechanics.

PHYSICAL REVIEW E (2021)

添加到收藏夹

Article Thermodynamics

Analysis of flow resistance in fractal porous media based on a three-dimensional pore-throat model

YingLin Li et al.

Summary: A new three-dimensional pore-throat model is established in this study, and the analytical correlation of flow resistance is derived by employing fractal theory in random porous media. The results show good agreement between the proposed model prediction and experimental data, with better predicting precision under specific conditions.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of stratified stacks on extraction and surface morphology of copper sulfides

Leiming Wang et al.

HYDROMETALLURGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Stochastic representation of the agglomeration process: Implications on the saturation variability in a dynamic heap leach

Raul Urtubia et al.

HYDROMETALLURGY (2020)

添加到收藏夹

Article Engineering, Chemical

The Sensitivity of Estimates of Multiphase Fluid and Solid Properties of Porous Rocks to Image Processing

Gaetano Garfi et al.

TRANSPORT IN POROUS MEDIA (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Applicability of pore networks to evaluate the inter-particle flow in heap leaching

W. Ashane M. Fernando et al.

HYDROMETALLURGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Predicting porosity, permeability, and tortuosity of porous media from images by deep learning

Krzysztof M. Graczyk et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Engineering, Chemical

A simplified capillary model for hydrodynamics simulation of cryogel continuous beds and particle packed beds

Chunjie Liu et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

添加到收藏夹

Article Energy & Fuels

Investigation on flow characteristic of viscoelasticity fluids in pore-throat structure

Yuan Li et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Chemical

Effect of surface tension, viscosity, pore geometry and pore contact angle on effective pore throat

Cong Chao et al.

CHEMICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Inter-particle liquid spread pertaining to heap leaching using UV fluorescence based image analysis

I. M. S. K. Ilankoon et al.

HYDROMETALLURGY (2019)

添加到收藏夹

Article Engineering, Chemical

The effects of simulated stacking phenomena on the percolation leaching of crushed ore, Part 2: Stratification

P. J. van Staden et al.

MINERALS ENGINEERING (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Preferential flow pathways in a deforming granular material: self-organization into functional groups for optimized global transport

Joost H. van der Linden et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Engineering, Chemical

Effect of the contact angle on the morphology, residence time distribution and mass transfer into liquid rivulets: A CFD study

Daniel Sebastia-Saez et al.

CHEMICAL ENGINEERING SCIENCE (2018)

添加到收藏夹

Article Geochemistry & Geophysics

4D multi-scale imaging of reactive flow in carbonates: Assessing the impact of heterogeneity on dissolution regimes using streamlines at multiple length scales

H. P. Menke et al.

CHEMICAL GEOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

The effects of simulated stacking phenomena on the percolation leaching of crushed ore, Part 1: Segregation

P. J. van Staden et al.

MINERALS ENGINEERING (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Preferential flow behaviour in unsaturated packed beds and heaps: Incorporating into a CFD model

D. McBride et al.

HYDROMETALLURGY (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

A 3D dual pore-system leaching model. Part 1: Study on fluid flow

Xiuxiu Miao et al.

HYDROMETALLURGY (2017)

添加到收藏夹

Article Engineering, Chemical

Improved inter-particle flow models for predicting heap leaching hydrodynamics

I. M. Saman K. Ilankoon et al.

MINERALS ENGINEERING (2017)

添加到收藏夹

Article Geochemistry & Geophysics

Permeability of porous media: Role of the critical pore size

Naoki Nishiyama et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Heap leaching as a key technology for recovery of values from low-grade ores - A brief overview

Jochen Petersen

HYDROMETALLURGY (2016)

添加到收藏夹

Article Engineering, Chemical

Modeling the hydrodynamics of heap leaching in sub-zero temperatures

D. McBride et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Engineering, Chemical

Liquid spread mechanisms in packed beds and heaps. The separation of length and time scales due to particle porosity

I. M. S. K. Ilankoon et al.

MINERALS ENGINEERING (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of ore size and heap porosity on capillary process inside leaching heap

Sheng-hua Yin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Magnetic resonance imaging characterisation of the influence of flowrate on liquid distribution in drip irrigated heap leaching

Marijke A. Fagan-Endres et al.

HYDROMETALLURGY (2015)

添加到收藏夹

Article Mathematics, Applied

4D-CT RECONSTRUCTION WITH UNIFIED SPATIAL-TEMPORAL PATCH-BASED REGULARIZATION

Daniil Kazantsev et al.

INVERSE PROBLEMS AND IMAGING (2015)

添加到收藏夹

Article Engineering, Chemical

Computational Permeability Determination from Pore-Scale Imaging: Sample Size, Mesh and Method Sensitivities

R. Guibert et al.

TRANSPORT IN POROUS MEDIA (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

MRI and gravimetric studies of hydrology in drip irrigated heaps and its effect on the propagation of bioleaching micro-organisms

Marijke A. Fagan et al.

HYDROMETALLURGY (2014)

添加到收藏夹

Article Engineering, Chemical

Optimization of a CFD - Heap leach model and sensitivity analysis of process operation

D. McBride et al.

MINERALS ENGINEERING (2014)

添加到收藏夹

Article Engineering, Chemical

Measuring hydrodynamic dispersion coefficients in unsaturated packed beds: Comparison of PEPT with conventional tracer tests

I. M. S. K. Ilankoon et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Article Engineering, Chemical

Phase distribution identification in the column leaching of low grade ores using MRI

M. A. Fagan et al.

MINERALS ENGINEERING (2013)

添加到收藏夹

Review Engineering, Chemical

Crushed ore agglomeration and its control for heap leach operations

Nikhil Dhawan et al.

MINERALS ENGINEERING (2013)

添加到收藏夹

Article Water Resources

Preferential flow occurs in unsaturated conditions

John R. Nimmo

HYDROLOGICAL PROCESSES (2012)

添加到收藏夹

Article Engineering, Chemical

Hysteresis in unsaturated flow in packed beds and heaps

I. M. S. K. Ilankoon et al.

MINERALS ENGINEERING (2012)

添加到收藏夹

Review Engineering, Chemical

Recent advances in the application of X-ray computed tomography in the analysis of heap leaching systems

Nikhil Dhawan et al.

MINERALS ENGINEERING (2012)

添加到收藏夹

Article Engineering, Chemical

Heap leach modeling employing CFD technology: A 'process' heap model

D. McBride et al.

MINERALS ENGINEERING (2012)

添加到收藏夹

Article Engineering, Environmental

Assessment of mass transfer in the stagnant liquid regions in trickle-bed reactors

Clarisa Mocciaro et al.

CHEMICAL ENGINEERING JOURNAL (2011)

添加到收藏夹

Article Engineering, Mechanical

Advanced three-dimensional multiphase flow simulation in porous media reconstructed from X-ray Microtomography using the He-Chen-Zhang Lattice Boltzmann Model

C. L. Lin et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2010)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The effect of preferential flow on extraction and surface morphology of copper sulphides during heap leaching

Aixiang Wu et al.

HYDROMETALLURGY (2009)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Three-dimensional electrical resistivity imaging of a gold heap

Dale F. Rucker et al.

HYDROMETALLURGY (2009)

添加到收藏夹

Article Engineering, Civil

Unsaturated flow and solute transport through the Chalk: Tracer test and dual permeability modelling

Gerd F. A. Van den Daele et al.

JOURNAL OF HYDROLOGY (2007)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Study on preferential flow in dump leaching of low-grade ores

Aixiang Wu et al.

HYDROMETALLURGY (2007)

添加到收藏夹

Article Engineering, Chemical

Liquid axial dispersion and holdup in column leaching

LRP De Andrade Lima

MINERALS ENGINEERING (2006)

添加到收藏夹

Article Engineering, Chemical

Nature of residual liquid holdup in packed beds of spherical particles

W van der Merwe et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.