☆ 4.2 Article

Mechanical and microstructural behavior of industrial spent catalyst waste and boron carbide reinforced aluminum matrix composites

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Fabrication and characterization of boron carbide/polymethyl methacrylate composites

Imtiaz Ahmad et al.

Summary: The composites prepared in this study using PMMA as the matrix and boron carbide nanoparticles as filler showed improved mechanical strength and thermal stability with an increase in filler concentration, especially at 20 wt%. The synthesized composites have the potential for diverse applications as indicated by FTIR, XRD, and SEM characterization.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Quasi-static compression behavior and microstructure changes in low-cost AA6061 composites

P. Hariharasakthisudhan et al.

Summary: The study investigates the response of low-cost aluminum composites reinforced with exhausted alkaline battery powders under quasi-static compression, revealing that the composite with 6 wt.% reinforcement has the lowest porosity and highest average strain hardening exponent.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of Nano-CuO on Synthesis and Mechanical Behavior of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminum Based Composite

Shashi Prakash Dwivedi et al.

Summary: The study utilized spent alumina catalyst and grinding sludge waste in developing an aluminum-based composite material, with the addition of nano-CuO particles to enhance mechanical properties. While tensile strength, hardness, and compressive strength improved, toughness decreased after adding the reinforcement particles. XRD analysis showed the presence of hard phases which contributed to the material's strength.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Studies on microstructural and mechanical properties of (Nano SiC

P. Pragathi et al.

Summary: In this study, waste alumina spent catalyst and nano SiC were used as reinforcement materials for aluminum composites, and the composites were fabricated through the stir casting process. The results showed that the nano SiC and spent catalyst were evenly distributed in the pure aluminum matrix, leading to an increase in hardness, tensile strength, and compressive strength of the composites.

MATERIALS TODAY COMMUNICATIONS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite

Shashi Prakash Dwivedi et al.

Summary: This study successfully enhanced the mechanical properties of the composite material by using SAC, CAES, and Cr as additives in the aluminium alloy, but at the cost of reduced toughness and ductility.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing

Ravi Butola et al.

Summary: The present study focused on fabricating silicon carbide particle reinforced AA7075 composites using Friction Stir Processing (FSP) and analyzing the impact of processing, particle addition, and tool rotational speed on mechanical and wear properties. Results indicated that reinforcement addition improved microhardness and wear resistance but led to decreased ductility and tensile strength in the material. Tool rotational speed showed a direct relationship with the tested mechanical and wear properties, with adhesive wear being the prominent wear mechanism observed. These composites have potential applications in industries like automotive, defense, and aerospace.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A review on aluminium metal matrix composites

B. Vijaya Ramnath et al.

Summary: Metal matrix composite refers to a type of metal reinforced with two or more constituents, suitable for various engineering applications. Aluminium alloy is widely used in aerospace and marine industries due to its high strength to weight ratio. This review paper discusses processing techniques, mechanical testing, and machining characteristics of Aluminum metal matrix composite (AMMC).

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Enhancement of mechanical properties of aluminium metal matrix composite by reinforcing waste alumina catalyst and nano Al2O3

J. Gayathri et al.

Summary: The study focused on synthesizing aluminum metal matrix composites using waste spent catalysts and nano Al2O3 as dual reinforcements through stir casting. The mechanical properties of the nano composites were found to be significantly improved compared to pure aluminum, with the composite Al + 10%WAC + 1% nano Al2O3 demonstrating the highest hardness of 94HRB and tensile strength of 115.21 MPa.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite

R. Manikandan et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of dual reinforcement (nano CuO plus reused spent alumina catalyst) on microstructure and mechanical properties of aluminium metal matrix composite

J. Gayathri et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and tribological characteristics of boron carbide reinforcement of AA6061 matrix composite

N. Rajesh Jesudoss Hynes et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization, corrosion and failure strength analysis of Al7075 influenced with B4C and Nano-Al2O3 composite using online acoustic emission

C. Emmy Prema et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and microstructure of A356 alloy reinforced AlN/MWCNT/graphite/Al composites fabricated by stir casting

K. Logesh et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and tribological behaviours of aluminium hybrid composites reinforced by CDA-B4C

R. Manikandan et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites

S. Devaganesh et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method

N. Ramadoss et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Energy & Fuels

Reusing exhausted alkaline battery powder as reinforcement in AA6061 composites and mechanical characterization

Hariharasakthisudhan Ponnarengan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

添加到收藏夹

Article Chemistry, Physical

Mechanical and tribological characterization of industrial wastes reinforced aluminum alloy composites fabricated via friction stir processing

Harikishor Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Mechanical

Utilization of waste spent alumina catalyst and agro-waste rice husk ash as reinforcement materials with scrap aluminium alloy wheel matrix

Shashi Prakash Dwivedi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid composite

Amit Aherwar et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites

T. Pratheep Reddy et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Reuse of petroleum industrial waste as reinforcement in aluminium matrix for enhancement of mechanical properties

J. Gayathri et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Chemistry, Physical

Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties

Pradeep Kumar Krishnan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Chuandong Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of metal powder premixing on mechanical behavior of dual reinforcement (Al2O3 (μm)/Si3N4 (nm)) in AA6061 matrix

P. Hariharasakthisudhan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite

Nishant Verma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Stability, viscosity, thermal conductivity, and electrical conductivity enhancement of multi-walled carbon nanotube nanofluid using gum arabic

P. Ganesh Kumar et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2017)

添加到收藏夹

Article Chemistry, Physical

Morphological and structural properties of neutron-irradiated B12C3 boron carbide microcrystals

Sara Pascale et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Recycling of spent catalyst and waste sludge from industry to substitute raw materials in the preparation of Portland cement clinker

Kae-Long Lin et al.

SUSTAINABLE ENVIRONMENT RESEARCH (2017)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation on thermophysical properties of solar glycol dispersed with multi-walled carbon nanotubes

P. Ganesh Kumar et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2016)

添加到收藏夹

Proceedings Paper Engineering, Environmental

Minimization of Waste Spent Catalyst in Refineries

T. Chiranjeevi et al.

WASTE MANAGEMENT FOR RESOURCE UTILISATION (2016)

添加到收藏夹

Review Engineering, Environmental

A review of metal recovery from spent petroleum catalysts and ash

Ata Akcil et al.

WASTE MANAGEMENT (2015)

添加到收藏夹

Proceedings Paper Environmental Sciences

Recovery of hazardous metals from spent refinery processing solid catalyst

Wei Shen et al.

SEVENTH INTERNATIONAL CONFERENCE ON WASTE MANAGEMENT AND TECHNOLOGY (ICWMT 7) (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.