相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of oxygenated fuel pertaining to fuel analysis on diesel engine combustion and emission characteristics
M. Kalil Rahiman et al.
ENERGY (2022)
Role of soluble nano-catalyst and blends for improved combustion performance and reduced greenhouse gas emissions in internal combustion engines
Xiumei Zhang et al.
FUEL (2022)
Advanced integrated nanocatalytic routes for converting biomass to biofuels: A comprehensive review
Hassan Karimi-Maleh et al.
FUEL (2022)
Effects of dispersed multiwalled carbon nanotubes on the micro-explosion and combustion characteristics of 2-methylfuran - diesel mixture droplets
Bhavishkar Ittoo et al.
FUEL (2022)
Photovoltaic integrated electric vehicles: Assessment of synergies between solar energy, vehicle types and usage patterns
Shemin Sagaria et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Performance of simple green synthesized Ag incorporated TiO2 nanoparticles based photoanodes by doctor-blade coating as working electrodes for dye sensitized solar cells
S. Rajkumar et al.
PROGRESS IN ORGANIC COATINGS (2022)
Evaporation characteristics of nanofuel droplets: A review
Abbasali Abouei Mehrizi et al.
FUEL (2022)
Spotlighting graphene-based catalysts for the mitigation of environmentally hazardous pollutants to cleaner production: A review
Yasser Vasseghian et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Nanochemistry approach for the fabrication of Fe and N co-decorated biomass-derived activated carbon frameworks: a promising oxygen reduction reaction electrocatalyst in neutral media
Hassan Karimi-Maleh et al.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY (2022)
Pre- and post-combustion emission reduction techniques for engine fuelled with diesel/DEE blends by three approaches
K. S. Nagaprasad et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)
Combustion characteristics of a single droplet of hydroprocessed vegetable oil blended with aluminum nanoparticles in a drop tube furnace
Ines A. S. Ferrao et al.
FUEL (2021)
Greenhouse gases utilization: A review
Luqman Jeffry et al.
FUEL (2021)
Combustion and emission characteristics of diesel engine fueled with nanocatalyst and pyrolysis oil produced from the solid plastic waste using screw reactor
Manigandan Sekar et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Comparison in the effects of alumina, ceria and silica nanoparticle additives on the combustion and emission characteristics of a modern methanol-diesel dual-fuel CI engine
Jiangjun Wei et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Experimental study on NOxreduction in a grapeseed oil biodiesel-fueled CI engine using nanoemulsions and SCR retrofitment
Praveena Vedagiri et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Experimental characterization of CI engine performance, combustion and emission parameters using various metal oxide nanoemulsion of grapeseed oil methyl ester
V. Praveena et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Experimental investigation on the performance, combustion and exhaust emission characteristics of a compression-ignition engine fueled with cottonseed oil biodiesel/diethyl ether/diesel fuel blends
Murat Kadir Yesilyurt et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics
Manzoore Elahi M. Soudagar et al.
RENEWABLE ENERGY (2020)
A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE)
Siti Nurul Akmal Yusof et al.
NANOTECHNOLOGY REVIEWS (2020)
A review on nanofluid: preparation, stability, thermophysical properties, heat transfer characteristics and application
Abu Raihan Ibna Ali et al.
SN APPLIED SCIENCES (2020)
Effect of nano-fuel additive on performance and emission characteristics of the diesel engine using biodiesel blends with diesel fuel
S. Mahalingam et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)
Simultaneous reduction of CO and NOx emissions as well as fuel consumption by using water and nano particles in Diesel-Biodiesel blend
Ayat Gharehghani et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Investigation of the effect of adding graphene oxide, graphene nanoplatelet, and multiwalled carbon nanotube additives with n-butanol-Jatropha methyl ester on a diesel engine performance
Ahmed I. El-Seesy et al.
RENEWABLE ENERGY (2019)
Experimental study on performance evaluation of PEM fuel cell by coating bipolar plate with materials having different contact angle
Elif Eker Kahveci et al.
FUEL (2019)
Experimental analysis of nanofuel additives with magnetic fuel conditioning for diesel engine performance and emissions
Rashmi Rekha Sahoo et al.
FUEL (2019)
Investigation on behavior of diesel engine performance, emission, and combustion characteristics using nano-additive in neat biodiesel
Yuvarajan Devarajan et al.
HEAT AND MASS TRANSFER (2019)
Performance, emission and combustion study on neat biodiesel and water blends fuelled research diesel engine
Santhanakrishnan Radhakrishnan et al.
HEAT AND MASS TRANSFER (2019)
The effect of engine emission on canola biodiesel blends with TiO2
S. Nithya et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines
M. Norhafana et al.
1ST INTERNATIONAL POSTGRADUATE CONFERENCE ON MECHANICAL ENGINEERING (IPCME2018) (2019)
Effects of graphene nanoplatelet addition to jatropha Biodiesel Diesel mixture on the performance and emission characteristics of a diesel engine
Ahmed I. El-Seesy et al.
ENERGY (2018)
Effects of graphite oxide and single-walled carbon nanotubes as diesel additives on the performance, combustion, and emission characteristics of a light-duty diesel engine
Jong Boon Ooi et al.
ENERGY (2018)
An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications
V. Dhana Raju et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Performance, combustion, and emission characteristics of a diesel engine fueled with Jatropha methyl ester and graphene oxide additives
Ahmed I. EL-Seesy et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide
Ang F. Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Effect of alumina nano additives into biodiesel-diesel blends on the combustion performance and emission characteristics of a diesel engine with exhaust gas recirculation
Praveen Anchupogu et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
The influence of copper oxide nano particle added pongamia methyl ester biodiesel on the performance, combustion and emission of a diesel engine
Varatharaju Perumal et al.
FUEL (2018)
Diesel engine combustion characteristics using nano-particles in biodiesel-diesel blends
G. Najafi
FUEL (2018)
High efficiency ethanol-diesel dual-fuel combustion: A comparison against conventional diesel combustion from low to full engine load
Vinicius B. Pedrozo et al.
FUEL (2018)
A Review on Nanofluids: Fabrication, Stability, and Thermophysical Properties
Naser Ali et al.
JOURNAL OF NANOMATERIALS (2018)
A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids
D. Dhinesh Kumar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Effect of aluminium oxide nanoparticles blended pongamia methyl ester on performance, combustion and emission characteristics of diesel engine
Muthusamy Sivakumar et al.
RENEWABLE ENERGY (2018)
A review on various after treatment techniques to reduce NOx emissions in a CI engine
V. Praveena et al.
JOURNAL OF THE ENERGY INSTITUTE (2018)
Study on effects of Alumina nanoparticles as additive with Poultry litter biodiesel on Performance, Combustion and Emission characteristic of Diesel engine
D. K. Ramesh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Performance, combustion, and emission characteristics of a diesel engine fueled by biodiesel-diesel mixtures with multi-walled carbon nanotubes additives
Ahmed I. El-Seesy et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Influence on the effect of zinc oxide and titanium dioxide nanoparticles as an additive with Calophyllum inophyllum methyl ester in a CI engine
K. Nanthagopal et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I - Experimental analysis
Esmail Khalife et al.
FUEL (2017)
A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel-biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part II - Exergetic analysis
Mortaza Aghbashlo et al.
FUEL (2017)
Improving combustion characteristics of diesel and biodiesel droplets by graphite oxide addition for diesel engine applications
Jong Boon Ooi et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)
Evaluation of thermal conductivity of MgO-MWCNTs/EG hybrid nanofluids based on experimental data by selecting optimal artificial neural networks
Masoud Vafaei et al.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2017)
A review on preparation methods, stability and applications of hybrid nanofluids
Nor Azwadi Che Sidik et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
EMISSION ANALYSIS ON THE INFLUENCE OF FERROFLUID ON RICE BRAN BIODIESEL
Yuvarajan Devarajan et al.
JOURNAL OF THE CHILEAN CHEMICAL SOCIETY (2017)
Effects of nano metal oxide blended Mahua biodiesel on CRDI diesel engine
C. Syed Aalam et al.
AIN SHAMS ENGINEERING JOURNAL (2017)
Combined effect of nanoemulsion and EGR on combustion and emission characteristics of neat lemongrass oil (LGO)-DEE-diesel blend fuelled diesel engine
R. Sathiyamoorthi et al.
APPLIED THERMAL ENGINEERING (2017)
A skeletal mechanism modeling on soot emission characteristics for biodiesel surrogates with varying fatty acid methyl esters proportion
Jiaqiang E et al.
APPLIED ENERGY (2016)
An assessment on performance, combustion and emission behavior of a diesel engine powered by ceria nanoparticle blended emulsified biofuel
M. Annamalai et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Effects of iso-butanol/diesel and n-pentanol/diesel blends on performance and emissions of a DI diesel engine under premixed LTC (low temperature combustion) mode
B. Rajesh Kumar et al.
FUEL (2016)
Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engine
Soner Gumus et al.
FUEL (2016)
Role of Cerium Oxide Nanoparticles as Diesel Additives in Combustion Efficiency Improvements and Emission Reduction
Deqing Mei et al.
JOURNAL OF ENERGY ENGINEERING (2016)
A review on preparation, characterization, properties and applications of nanofluids
Dhinesh Kumar Devendiran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Role of Cerium Oxide Nanoparticles as Diesel Additives in Combustion Efficiency Improvements and Emission Reduction
Deqing Mei et al.
JOURNAL OF ENERGY ENGINEERING (2016)
An overview: Energy saving and pollution reduction by using green fuel blends in diesel engines
John Kennedy Mwangi et al.
APPLIED ENERGY (2015)
An experimental investigation into combustion and performance characteristics of an HCCI gasoline engine fueled with n-heptane, isopropanol and n-butanol fuel blends at different inlet air temperatures
Ahmet Uyumaz
ENERGY CONVERSION AND MANAGEMENT (2015)
Comparison of combustion characteristics of n-butanol/ethanol-gasoline blends in a HCCI engine
Bang-Quan He et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental investigation of stability and thermophysical properties of carbon nanotubes suspension in the presence of different surfactants
Mehdi Shanbedi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)
Experimental investigation of DI diesel engine performance with oxygenated additive and SOME Biodiesel
Venkatraman Narasiman et al.
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2015)
A review on hybrid nanofluids: Recent research, development and applications
Jahar Sarkar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel-soybean biodiesel blend fuel: Combustion, engine performance and emissions
T. Shaafi et al.
RENEWABLE ENERGY (2015)
Performance and Emission characteristics of a CI Engine fuelled with diesel and TiO2 nanoparticles as fuel additive
Rolvin D'Silva et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Emissions and fuel economy for a hybrid vehicle
Imdat Taymaz et al.
FUEL (2014)
Performance, emission and combustion characteristics of a diesel engine using Carbon Nanotubes blended Jatropha Methyl Ester Emulsions
J. Sadhik Basha et al.
ALEXANDRIA ENGINEERING JOURNAL (2014)
The effect of functionalisation method on the stability and the thermal conductivity of nanaluid hybrids of carbon nanotubes/gamma alumina
Saloumeh Mesgari Abbasi et al.
CERAMICS INTERNATIONAL (2013)
Performance and emission characteristics of a DI diesel engine with a nanofuel additive
M. A. Lenin et al.
FUEL (2013)
A statistical investigation of biodiesel effects on regulated exhaust emissions during transient cycles
Evangelos G. Giakoumis
APPLIED ENERGY (2012)
A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications
Wei Yu et al.
JOURNAL OF NANOMATERIALS (2012)
Multi Response Optimization of NOx Emission of a Stationary Diesel Engine Fuelled with Crude Rice Bran Oil Methyl Ester
S. Saravanan et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2012)
Synthesis of spherical silica/multiwall carbon nanotubes hybrid nanostructures and investigation of thermal conductivity of related nanofluids
Mohammadali Baghbanzadeh et al.
THERMOCHIMICA ACTA (2012)
Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions
Binglu Ruan et al.
NANOSCALE RESEARCH LETTERS (2012)
Synthesis of Al2O3-Cu/water hybrid nanofluids using two step method and its thermo physical properties
S. Suresh et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Defect Engineering in Cubic Cerium Oxide Nanostructures for Catalytic Oxidation
Neil J. Lawrence et al.
NANO LETTERS (2011)
Experimental investigation of the thermal transport properties of a carbon nanohybrid dispersed nanofluid
Tessy Theres Baby et al.
NANOSCALE (2011)
Study of the Dispersion and Electrical Properties of Carbon Nanotubes Treated by Surfactants in Dimethylacetamide
Q. Y. Tang et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2010)
Thermal conductivity studies of metal dispersed multiwalled carbon nanotubes in water and ethylene glycol based nanofluids
Neetu Jha et al.
JOURNAL OF APPLIED PHYSICS (2009)
Characterization of ZnO nanoparticle suspension in water: Effectiveness of ultrasonic dispersion
S. J. Chung et al.
POWDER TECHNOLOGY (2009)
The effects of temperature, volume fraction and vibration time on the thermo-physical properties of a carbon nanotube suspension (carbon nanofluid)
A. Amrollahi et al.
NANOTECHNOLOGY (2008)
Production and dispersion stability of nanoparticles in nanofluids
Yujin Hwang et al.
POWDER TECHNOLOGY (2008)
Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids
X. F. Li et al.
THERMOCHIMICA ACTA (2008)
Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives
Soumen Jana et al.
THERMOCHIMICA ACTA (2007)
Evaluation on dispersion behavior of the aqueous copper nano-suspensions
Xinfang Li et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)
Greenhouse gas emissions of the US transportation sector - Trends, uncertainties, and methodological improvements
John Davies et al.
TRANSPORTATION RESEARCH RECORD (2007)
Thermal conductivity of Fe nanofluids depending on the cluster size of nanoparticles
KS Hong et al.
APPLIED PHYSICS LETTERS (2006)
The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation
HJ Jung et al.
COMBUSTION AND FLAME (2005)
Stabilization of individual carbon nanotubes in aqueous solutions
R Bandyopadhyaya et al.
NANO LETTERS (2002)