4.7 Review

A technical review on coke rate and quality in low-carbon blast furnace ironmaking

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Metallurgy & Metallurgical Engineering

Gasification Behaviors of Ferrocoke With and Without Water Vapor

Runsheng Xu et al.

Summary: This study investigates the behaviors of different coke samples during gasification and finds that high-reactivity coke can improve reaction efficiency and reduce CO2 emission. The presence of water vapor is found to affect the structural evolution of coke and the oxidation process of iron particles.

STEEL RESEARCH INTERNATIONAL (2022)

Article Green & Sustainable Science & Technology

Mathematical simulation and life cycle assessment of blast furnace operation with hydrogen injection under constant pulverized coal

Jue Tang et al.

Summary: The study showed that injecting H-2 into the blast furnace leads to stable operation, increased productivity, reduced environmental impacts, especially a significant decrease in CO2 emissions.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Metallurgy & Metallurgical Engineering

A Review on Explorations of the Oxygen Blast Furnace Process

Wei Zhang et al.

Summary: The theoretical study of the oxygen blast furnace process has led to suggestions for revisions of static and dynamic models, focusing on the newest theoretical findings in thermodynamics and kinetics. Further development of models concentrating on energy demand and emissions are recommended for enhanced efficiency and sustainability.

STEEL RESEARCH INTERNATIONAL (2021)

Article Energy & Fuels

Conversion of Injected Forestry Waste Biomass Charcoal in a Blast Furnace: Influence of Pyrolysis Temperature

Jon Solar et al.

Summary: The study investigates the influence of pyrolysis temperature on the combustion behavior of biomass-derived charcoal under conditions simulating tuyere injection operations. Results show that higher pyrolysis temperature leads to lower charcoal yields, decreased volatile matter and oxygen content, and increased carbon content. Charcoal particle size affects conversion degree in the injection rig reactor, with significant differences observed between different temperature charcoal properties.

ENERGY & FUELS (2021)

Review Chemistry, Physical

The production and application of hydrogen in steel industry

Wenguo Liu et al.

Summary: This review discusses the potential of hydrogen as a clean energy source in the steel industry and summarizes different hydrogen production technologies. It also highlights the applications of hydrogen in various steel production processes and provides suggestions for the future development of the steel industry in China.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Metallurgy & Metallurgical Engineering

Gasification Behaviors of Coke in a Blast Furnace with and without H2

Chen-chen Lan et al.

Summary: Thermodynamic calculations and experiments show the gasification behavior of coke in a blast furnace is affected by the ratio of φ(CO)/φ(H-2) and the presence of H-2. Changes in these parameters also affect the porosity of the coke, with implications on the reduction of iron oxide and coke consumption.

ISIJ INTERNATIONAL (2021)

Article Energy & Fuels

Modeling of hydrogen shaft injection in ironmaking blast furnaces

Xiaobing Yu et al.

Summary: The study using a multi-fluid BF model investigates the impact of hydrogen shaft injection on BF performance, revealing significant effects on gas flow field, thermal field, and reduction behaviors. With increasing injection rate, hydrogen penetration depth increases, apex of cohesive zone shifts upwards with more concave profile, and both reduction degree of iron oxides and thermal conditions in the shaft improve, leading to a significantly decreased fossil fuel rate.
Review Thermodynamics

Modelling and optimisation of biomass injection in ironmaking blast furnaces

Yiran Liu et al.

Summary: This study reviews key aspects of biomass combustion in blast furnaces, including experimental and numerical studies, and the application of research findings. It covers biomass pretreatment, mathematical modeling, furnace phenomena understanding, among others, providing valuable insights for improving green ironmaking technology.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Article Energy & Fuels

Numerical investigation of oxygen-enriched operations in blast furnace ironmaking

Haiqi Nie et al.

Summary: Oxygen blast furnace ironmaking utilizes high oxygen enrichment in the blast to achieve "zero carbon footprint" production. The increase in oxygen enrichment initially leads to an increase in fuel or coke rate, impacting the flow and thermochemical behaviors and the cohesive zone height in the furnace. The analysis also shows the influence of blast temperature and top pressure on coke rate and productivity, with top pressure having a more significant effect at higher oxygen enrichments.
Article Materials Science, Multidisciplinary

Influence of Reducing Gas Injection Methods on Pulverized Coal Combustion in a Medium Oxygen-Enriched Blast Furnace

Xing Peng et al.

Summary: The study demonstrates that medium oxygen-enriched blast furnaces utilizing reducing gas injections are an effective new ironmaking process for significantly reducing coke ratio and carbon dioxide emissions. Two injection methods were designed to better inject the reducing gas, suitable for injecting small and large amounts of reducing gas, respectively.
Article Geochemistry & Geophysics

Experiences of Bio-Coal Applications in the Blast Furnace Process-Opportunities and Limitations

Lena Sundqvist Okvist et al.

Summary: Steel companies worldwide are striving to reduce CO2 emissions by using hydrogen instead of coal and coke in blast furnaces. Utilizing climate neutral bio-coal products in the metal industry, such as at blast furnaces, presents a significant opportunity to lower climate impact in the short term.

MINERALS (2021)

Article Metallurgy & Metallurgical Engineering

Coke Gasification in Blast Furnace Shaft Conditions with H2 and H2O Containing Atmospheres

Anne M. Heikkila et al.

Summary: This study investigates the impact of BF atmosphere composition on coke gasification, finding that coke gasification is faster in wall atmosphere conditions, and the introduction of H2 and H2O can accelerate coke gasification.

STEEL RESEARCH INTERNATIONAL (2021)

Review Metallurgy & Metallurgical Engineering

Review of green and low-carbon ironmaking technology

Jun Zhao et al.

IRONMAKING & STEELMAKING (2020)

Article Metallurgy & Metallurgical Engineering

Effect of the Ash from H2-Rich Carbonaceous Materials on the Physicochemical Properties of Raceway Slag and Coke Reactivity

Hesham Ahmed et al.

STEEL RESEARCH INTERNATIONAL (2020)

Article Energy & Fuels

Model Study of Shaft Injection of Reformed Coke Oven Gas in a Blast Furnace

Ziguang Zhao et al.

ENERGY & FUELS (2020)

Article Materials Science, Multidisciplinary

Gasification kinetics of bulk coke in the CO2/CO/H2/H2O/N2 system simulating the atmosphere in the industrial blast furnace

Min-min Sun et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

Article Metallurgy & Metallurgical Engineering

Efficiency of Biomass Use for Blast Furnace Injection

Alexander Babich et al.

ISIJ INTERNATIONAL (2019)

Review Metallurgy & Metallurgical Engineering

Perspective toward Long-term Global Goal for Carbon Dioxide Mitigation in Steel Industry

Tatsuro Ariyama

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2019)

Article Materials Science, Multidisciplinary

Research on the Post-reaction Strength of Iron Coke Hot Briquette Under Different Conditions

Hongtao Wang et al.

Article Materials Science, Multidisciplinary

Effect of Hydrogen Addition on Softening and Melting Reduction Behaviors of Ferrous Burden in Gas-Injection Blast Furnace

Yana Qie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

Article Engineering, Chemical

Effects of coal and iron ore blending on metallurgical properties of iron coke hot briquette

Hongtao Wang et al.

POWDER TECHNOLOGY (2018)

Article Chemistry, Physical

Thermodynamic and kinetic behaviors of coke gasification in N2-CO-CO2-H2-H2O

Chenchen Lan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Green & Sustainable Science & Technology

Assessment of hydrogen direct reduction for fossil-free steelmaking

Valentin Vogl et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Metallurgy & Metallurgical Engineering

Microscopic study on the interior and exterior reactions of coke with CO2 and H2O

P. Wang et al.

IRONMAKING & STEELMAKING (2017)

Article Metallurgy & Metallurgical Engineering

Catalytic Behavior of Potassium Vapor on Coke Gasification Reaction

Jian Bo Zhong et al.

STEEL RESEARCH INTERNATIONAL (2017)

Article Metallurgy & Metallurgical Engineering

Degradation Behavior of Coke Reacting with H2O and CO2 at High Temperature

Ping Wang et al.

ISIJ INTERNATIONAL (2017)

Article Metallurgy & Metallurgical Engineering

Effect of Hydrogen Addition on Reduction Kinetics of iron Oxides in Gas-injection BE

Yana Qie et al.

ISIJ INTERNATIONAL (2017)

Article Green & Sustainable Science & Technology

Modeling and simulation of hydrogen injection into a blast furnace to reduce carbon dioxide emissions

Can Yilmaz et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Green & Sustainable Science & Technology

Modeling and simulation of the use of direct reduced iron in a blast furnace to reduce carbon dioxide emissions

Can Yilmaz et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Metallurgy & Metallurgical Engineering

Numerical analysis of carbon saving potential in a top gas recycling oxygen blast furnace

Xue-feng She et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)

Article Metallurgy & Metallurgical Engineering

Medium oxygen enriched blast furnace with top gas recycling strategy

Wei Zhang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)

Article Metallurgy & Metallurgical Engineering

Current status and development trends of innovative blast furnace ironmaking technologies aimed to environmental harmony and operation intellectualization

Hong-tao Wang et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)

Review Green & Sustainable Science & Technology

A review of thermochemical processes and technologies to use steelworks off-gases

Wilmar Uribe-Soto et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Current status and potential of biomass utilization in ferrous metallurgical industry

Rufei Wei et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Engineering, Environmental

The energy consumption and carbon emission of the integrated steel mill with oxygen blast furnace

Peng Jin et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

Article Metallurgy & Metallurgical Engineering

Mathematical Modeling of the Energy Consumption and Carbon Emission for the Oxygen Blast Furnace with Top Gas Recycling

Peng Jin et al.

STEEL RESEARCH INTERNATIONAL (2016)

Article Chemistry, Applied

Effect of briquette composition and size on the quality of the resulting coke

M. G. Montiano et al.

FUEL PROCESSING TECHNOLOGY (2016)

Article Metallurgy & Metallurgical Engineering

Numerical simulation on novel blast furnace operation of combining coke oven gas injection with hot burden charging

Z. Liu et al.

IRONMAKING & STEELMAKING (2016)

Article Metallurgy & Metallurgical Engineering

Mathematical simulation and experimental study on coke oven gas injection aimed to low carbon blast furnace ironmaking

H. M. Long et al.

IRONMAKING & STEELMAKING (2016)

Article Metallurgy & Metallurgical Engineering

Conversion of injected waste plastics in blast furnace

A. Babich et al.

IRONMAKING & STEELMAKING (2016)

Article Metallurgy & Metallurgical Engineering

Fundamental research on iron coke hot briquette - A new type burden used in blast furnace

H. Wang et al.

IRONMAKING & STEELMAKING (2016)

Article Metallurgy & Metallurgical Engineering

Coke Degradation under Simulated Blast Furnace Conditions

Xing Xing et al.

ISIJ INTERNATIONAL (2016)

Article Green & Sustainable Science & Technology

Evaluation of criteria for CO2 capture and storage in the iron and steel industry using the 2-tuple DEMATEL technique

M. Abdul Quader et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Materials Science, Multidisciplinary

Coke Reactivity in Simulated Blast Furnace Shaft Conditions

Juho Haapakangas et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)

Review Green & Sustainable Science & Technology

Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (CO2) Steelmaking (ULCOS) program

M. Abdul Quader et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Green & Sustainable Science & Technology

Biomass applications in iron and steel industry: An overview of challenges and opportunities

Elsayed Mousa et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Metallurgy & Metallurgical Engineering

Mathematical Simulation on Blast Furnace Operation of Coke Oven Gas Injection in Combination with Top Gas Recycling

Hongtao Wang et al.

STEEL RESEARCH INTERNATIONAL (2016)

Article Green & Sustainable Science & Technology

Concept and Current State of CO2 Ultimate Reduction in the Steelmaking Process (COURSE50) Aimed at Sustainability in the Japanese Steel Industry

Shigeaki Tonomura et al.

JOURNAL OF SUSTAINABLE METALLURGY (2016)

Article Green & Sustainable Science & Technology

Sustainable Aspects of CO2 Ultimate Reduction in the Steelmaking Process (COURSE50 Project), Part 1: Hydrogen Reduction in the Blast Furnace

Koki Nishioka et al.

JOURNAL OF SUSTAINABLE METALLURGY (2016)

Article Engineering, Chemical

Optimal operation strategy and gas utilization in a future integrated steel plant

Hamid Ghanbari et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)

Article Chemistry, Physical

Kinetic analysis of gasification reaction of coke with CO2 or H2O

Wentao Guo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Kinetics and mechanisms of direct reduction of iron ore-biomass composite pellets with hydrogen gas

Dabin Guo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Metallurgy & Metallurgical Engineering

Perspective on Progressive Development of Oxygen Blast Furnace for Energy Saving

Koichi Takahashi et al.

ISIJ INTERNATIONAL (2015)

Review Green & Sustainable Science & Technology

A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing

M. Abdul Quader et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Materials Science, Multidisciplinary

Reduction disintegration mechanism of cold briquettes from blast furnace dust and sludge

Leandro Rocha Lemos et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)

Article Agricultural Engineering

Co-pyrolysis of pine sawdust and lignite in a thermogravimetric analyzer and a fixed-bed reactor

Yuyao Song et al.

BIORESOURCE TECHNOLOGY (2014)

Article Thermodynamics

Synergistic effects and kinetics thermal behaviour of petroleum coke/biomass blends during H2O co-gasification

Elbager M. A. Edreis et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Energy & Fuels

Influence of biomass on metallurgical coke quality

M. G. Montiano et al.

Article Chemistry, Applied

Mineralogy and reactivity of cokes in a working blast furnace

Sushil Gupta et al.

FUEL PROCESSING TECHNOLOGY (2014)

Article Engineering, Chemical

Gasification of Graphite and Coke in Carbon-Carbon Dioxide-Sodium or Potassium Carbonate Systems

Kejiang Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Metallurgy & Metallurgical Engineering

Recycling Waste Bakelite as an Alternative Carbon Resource for Ironmaking Applications

Renu Dhunna et al.

ISIJ INTERNATIONAL (2014)

Review Green & Sustainable Science & Technology

Alternative emerging ironmaking technologies for energy-efficiency and carbon dioxide emissions reduction: A technical review

Ali Hasanbeigi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Materials Science, Multidisciplinary

Charcoal injection in blast furnaces (Bio-PCI): CO2 reduction potential and economic prospects

Cristobal Feliciano-Bruzual

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2014)

Article Engineering, Environmental

The Roles of Energy and Material Efficiency in Meeting Steel Industry CO2 Targets

Rachel L. Milford et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Article Metallurgy & Metallurgical Engineering

Optimization of Steelmaking Using Fastmet Direct Reduced Iron in the Blast Furnace

Kaisa Huitu et al.

ISIJ INTERNATIONAL (2013)

Article Metallurgy & Metallurgical Engineering

Operation Trial of Hydrogenous Gas Injection of COURSE50 Project at an Experimental Blast Furnace

Shiro Watakabe et al.

ISIJ INTERNATIONAL (2013)

Article Engineering, Environmental

A model of biomass char gasification describing the change in catalytic activity of ash

Kentaro Umeki et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Metallurgy & Metallurgical Engineering

Effect of Hydrogen Addition on Reduction Behavior of Ore Layer Mixed with Coke

Yusuke Kashihara et al.

ISIJ INTERNATIONAL (2012)

Article Metallurgy & Metallurgical Engineering

Simulation of Blast Furnace Operation with Intensive Hydrogen Injection

Hiroshi Nogami et al.

ISIJ INTERNATIONAL (2012)

Article Metallurgy & Metallurgical Engineering

Effects of Biomass Use in Integrated Steel - Plant Gate-to-gate Life Cycle Inventory Method

Hannu Suopajarvi et al.

ISIJ INTERNATIONAL (2012)

Article Metallurgy & Metallurgical Engineering

Biomass as a Source of Renewable Carbon for Iron and Steelmaking

Terry Norgate et al.

ISIJ INTERNATIONAL (2012)

Article Metallurgy & Metallurgical Engineering

Penetration Effect of Injected Gas at Shaft Gas Injection in Blast Furnace Analyzed by Hybrid Model of DEM-CFD

Shungo Natsui et al.

ISIJ INTERNATIONAL (2011)

Article Metallurgy & Metallurgical Engineering

Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends

James Ransford Dankwah et al.

ISIJ INTERNATIONAL (2011)

Article Metallurgy & Metallurgical Engineering

Enhancement of Low-temperature Gasification and Reduction by Using Iron-coke in Laboratory Scale Tests

Kenichi Higuchi et al.

ISIJ INTERNATIONAL (2011)

Article Metallurgy & Metallurgical Engineering

Utilization of Ores with High Combined Water Content for Ore-carbon Composite and Iron Coke

Taichi Murakami et al.

ISIJ INTERNATIONAL (2011)

Article Metallurgy & Metallurgical Engineering

Reaction Behavior of Ferro Coke and Its Evaluation in Blast Furnace

Tetsuya Yamamoto et al.

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2011)

Article Engineering, Environmental

CO2 reforming of CH4 in coke oven gas to syngas over coal char catalyst

Guojie Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2010)

Article Metallurgy & Metallurgical Engineering

Optimization of Top Gas Recycling Conditions under High Oxygen Enrichment in the Blast Furnace

Hannu Helle et al.

ISIJ INTERNATIONAL (2010)

Article Metallurgy & Metallurgical Engineering

Charcoal Behaviour by Its Injection into the Modern Blast Furnace

Alexander Babich et al.

ISIJ INTERNATIONAL (2010)

Article Metallurgy & Metallurgical Engineering

Reaction behavior of Formed Iron Coke and Its Effect on Decreasing Thermal Reserve Zone Temperature in Blast Furnace

Seiji Nomura et al.

ISIJ INTERNATIONAL (2010)

Article Chemistry, Applied

Possible CO2 mitigation via addition of charcoal to coking coal blends

J. A. MacPhee et al.

FUEL PROCESSING TECHNOLOGY (2009)

Article Metallurgy & Metallurgical Engineering

Carbonization behaviour of woody biomass and resulting metallurgical coke properties

Takehiro Matsumura et al.

ISIJ INTERNATIONAL (2008)

Article Energy & Fuels

An approach to blast furnace coke quality prediction

R. Alvarez et al.

Article Chemistry, Physical

Hydrogen production by catalytic partial oxidation of methane and propane on Ni and Pt catalysts

Pasquale Corbo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Article Metallurgy & Metallurgical Engineering

Results and trends on the injection of plastics and ASR into the blast furnace

Joachim Buchwalder et al.

ISIJ INTERNATIONAL (2006)

Article Metallurgy & Metallurgical Engineering

Optimization of ironmaking process for reducing CO2 emissions in the integrated steel works

Tatsuro Ariyama et al.

ISIJ INTERNATIONAL (2006)

Article Metallurgy & Metallurgical Engineering

Mathematical modelling of the injection of coke oven gas into a blast furnace tuyere

P Hellberg et al.

SCANDINAVIAN JOURNAL OF METALLURGY (2005)

Article Metallurgy & Metallurgical Engineering

Improvement in blast furnace reaction efficiency through the use of highly reactive calcium rich coke

S Nomura et al.

ISIJ INTERNATIONAL (2005)

Review Metallurgy & Metallurgical Engineering

Reduction of CO2 emissions from integrated steel works and its subjects for a future study

T Ariyama et al.

ISIJ INTERNATIONAL (2005)

Article Metallurgy & Metallurgical Engineering

Numerical analysis on injection of hydrogen bearing materials into blast furnace

M Chu et al.

ISIJ INTERNATIONAL (2004)

Article Metallurgy & Metallurgical Engineering

Choice of technological regimes of a blast furnace operation with injection of hot reducing gases

AI Babich et al.

REVISTA DE METALURGIA (2002)

Article Metallurgy & Metallurgical Engineering

Development of waste plastics injection process in blast furnace

M Asanuma et al.

ISIJ INTERNATIONAL (2000)