☆ 4.5 Article

The role of loading mode on the property degradation of adhesives at high temperatures

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Substrate temperature effects on the peel behavior of temporary pavement marking tapes

Hyeyoung Son et al.

Summary: The adhesion of temporary pavement marking (TPM) tapes is crucial for road construction traffic safety. Testing the viscoelastic properties and peel force of different brands of TPM tapes can determine the effective operating temperature range for each tape.

JOURNAL OF ADHESION (2023)

添加到收藏夹

Review Engineering, Chemical

Effect of surface texture on the mechanical performance of bonded joints: a review

Nidhal Naat et al.

Summary: This article reviews the importance of surface treatment before adhesive bonding and its impact on the strength and durability of adhesively bonded joints. It discusses different adhesion mechanisms and classifies surface texture into stochastic and structured surfaces, highlighting their effect on wettability. The review also focuses on the influence of surface texture, particularly structured surface parameters, on the quasi-static strength and fatigue behavior of adhesively bonded joints. Additionally, it provides an overview of the manufacturing process of structured surface texture for adhesive bonding applications and highlights future research directions.

JOURNAL OF ADHESION (2023)

添加到收藏夹

Article Engineering, Chemical

Effects of steel surface treatment with silanized carbon nanotubes on the bonding properties between steel and epoxy adhesive

Wanru Wang et al.

Summary: The interfacial bonding properties between steel and adhesives play a crucial role in the application of external bonded fiber reinforced polymer composites for strengthening steel structures. In this study, a new method was proposed to enhance the interfacial bond strength between steel and an epoxy adhesive by treating the steel surface with carbon nanotubes (CNTs). The CNTs were modified in an ethanol-water mixture using silane and PVP to improve their dispersity. Steel plates treated with CNTs suspensions through dip-coating or spray-coating exhibited a significantly increased interface shear strength compared to the control samples.

JOURNAL OF ADHESION (2023)

添加到收藏夹

Article Engineering, Chemical

Fatigue life estimation of adhesive joints at different mode mixities

F. Castro Sousa et al.

Summary: The study aims to develop a fatigue model for predicting the fatigue life of epoxy-based adhesive loaded under different mode mixities. A master S-N curve was constructed based on experimental data in pure mode loading conditions, and the fatigue lives of the joints under mixed mode conditions were estimated using numerical simulations. Two different relations (Basquin and Stromeyer) were considered, and the influence of the number of load levels on the master curve was analyzed. The results showed a good agreement between the predicted fatigue lives based on the proposed model and the experimental data.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Chemical

A methodology for detection of crack initiation in adhesively bonded joints under constant and variable amplitude fatigue loading

M. Gastens et al.

Summary: This study presents a new approach for detecting crack initiation in adhesively bonded single lap joints subjected to constant and variable amplitude fatigue loading using the backface strain method. The results showed a converging-diverging trend in strain amplitude curves under constant amplitude loading, which correlated well with the onset of crack initiation. The methodology was also successfully demonstrated on joints subjected to variable amplitude loading using an additional farfield strain gauge for detecting crack initiation.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Chemical

Effect of test temperature on the shear and fatigue strengths of epoxy adhesive joints

K. Houjou et al.

Summary: Double lap joints made with epoxy adhesive and aluminum plates were studied for their high-temperature strength properties through tensile, thermal aging, creep, and cyclic fatigue tests. Results showed that exposure to 135 degrees C significantly decreased strength, and the relationship between test temperature and shear strength could be expressed through thermal activation theory. In fatigue tests, specimens under constant stress exhibited higher strength than those under cyclic strain, while creep deformation had a significant impact on strength at high temperatures.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Chemical

Cyclic ageing of adhesive materials

J. A. da Costa et al.

Summary: This study investigated the hygrothermal ageing of an epoxy-based adhesive through experiments, revealing changes in the water diffusion process and reduction in glass transition temperature with ageing cycles. Good agreement was found between experimental and numerical results.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Review Mechanics

A comprehensive review on structural joining techniques in the marine industry

F. Delzendehrooy et al.

Summary: This article reviews the current research on marine structure joining techniques and compares various methods. Each technique has its advantages and limitations, and the selection of the most suitable joining method should consider factors such as structure application, fabrication process, and environmental impacts.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Chemical

Effects of aging temperature and humidity on the response of medium and high strength threadlockers

D. Croccolo et al.

Summary: The study examines the strength performance of joints with added threadlocker under different temperature and humidity conditions, conducting experiments on Loctite 243 and Loctite 270 applied to zinc-coated screws, providing valuable data for design purposes.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Chemical

Investigation of the adhesive contact between a diamond indenter and single-Crystal copper substrate at low temperatures

Qiyin Lin et al.

Summary: By simulating the adhesion contact and separation process between a hemispherical diamond indenter and a single-crystal copper substrate at low temperatures using a mixed potential function (EAM and Morse) and the Verlet algorithm, it was found that as the temperature decreases, the time for adhesion is delayed and the adhesion forces increase slightly. The temperature also affects the generation and interaction of dislocations in the substrate, leading to fluctuations in the load on the indenter.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Review Engineering, Chemical

Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview

Michal K. Budzik et al.

Summary: The review article discusses how the development of new adhesives has expanded the use of bonding in various industrial fields, including aerospace, wind energy, automotive, and civil engineering. Due to the lack of relevant regulations across different sectors, academia and companies often establish their own standards. To ensure continuous growth of adhesive bonding, new international standards focusing on the performance of adhesive joints are necessary.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Chemical

Replacing welding with adhesive bonding: An industrial case study

J. Antelo et al.

Summary: Welding is a commonly used joining technique in engineering, but it can lead to residual stress in substrates. Adhesive bonding, on the other hand, has advantages over welding but is not fully trusted in some industrial sectors. This study compared the performance of welding and adhesive bonding in a real structural component, concluding that adhesive bonding could be a suitable replacement for welding.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Chemistry, Physical

Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry

Mael Perez et al.

Summary: The aim of this study is to investigate the fracture mechanics behavior of adhesive materials under different loading rates and ambient temperatures. The results show that increasing the loading rate significantly enhances the maximum strength of the adhesive, especially at room temperature. Additionally, temperature has a significant effect on the stiffness of the adhesive material.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints

Ali Sadeghi et al.

Summary: This study investigates the influence of various parameters on the strength and failure mode of bonded composite-to-composite single-lap joints. The results show that the fiber angle has a significant effect on the shear and peel stresses in the adhesive layer. Experimental and numerical findings demonstrate that the failure of composite joints is greatly influenced by shear stress.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of the mechanical performance of hybrid bolted-bonded joints subjected to different ageing conditions: Effect of geometrical parameters and bolt size

F. Delzendehrooy et al.

Summary: The hybrid bolted-bonded joining method is an effective way to mitigate concerns raised by the poor environmental resistance of adhesive joints in the marine industry. This study investigates the degradation of single lap hybrid bolted-bonded joints exposed to ageing conditions, and the results suggest that the size of the bolt and the ratios of hole diameter to width and hole diameter to edge distance have significant effects on the joint performance.

JOURNAL OF ADVANCED JOINING PROCESSES (2022)

添加到收藏夹

Article Engineering, Chemical

Effect of residual strains on the static strength of dissimilar single lap adhesive joints

S. Safaei et al.

Summary: The research investigates the effects of thermal cycles on residual strains in adhesive joints, revealing that the residual strains increase with thermal cycles, leading to a decrease in the static strength of the joints. Finite element thermal analysis was conducted and compared with experimental results.

JOURNAL OF ADHESION (2021)

添加到收藏夹

Article Mechanics

An experimental study on the mechanical behaviour of bonded and hybrid bonded-bolted composite joints using digital image correlation (DIC) technique

JiHyun Kim et al.

Summary: The study applied 2D Digital Image Correlation (2D-DIC) technique to investigate the mechanical behavior of hybrid bonded-bolted (HBB) joints under quasi-static tensile loading. The strain fields around bolts in HBB joints and around open holes in bonded joints were accurately compared, and the DIC technique effectively identified the onset of failure during tests. The advantages and disadvantages of DIC technique compared to classical techniques for characterizing composite joints were briefly explained.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life evaluation of adhesive joints in a real structural component

J. Antelo et al.

Summary: By utilizing the stress-life approach and experimental tests, it was found that adhesive bonding can be a suitable alternative to welding in industrial vehicle structural components.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Mechanics

Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints

Kobye Bodjona et al.

Summary: The compliance of the adhesive layer has an impact on the strength of single-lap hybrid bonded-bolted joints. For joints with low compliance adhesive, adding a fastener does not provide benefits, while for joints with high compliance adhesive, adding a fastener significantly delays the initial failure. A proposed mechanism, supported by a numerical model, explains the observed behavior.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Chemical

The effects of service temperature on the fatigue behavior of a polyurethane adhesive joint

Wei Tan et al.

Summary: The study revealed that temperature has a significant impact on the quasi-static and fatigue performance of joints. As temperature increases, the failure load and displacement of the joints gradually decrease, leading to a reduction in fatigue performance. The closer the temperature is to the adhesive’s glass transition temperature, the greater the decrease in fatigue performance.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Welding and processing of metallic materials by using friction stir technique: A review

Mostafa M. El-Sayed et al.

Summary: Friction stir technique has been crucial in recent industries, especially in welding and processing metallic materials. Variants such as FSW, FSSW, UFSW, and VCFSW are utilized for joining weldable materials and enhancing their properties. Despite the benefits, these techniques also have their own defects and research gaps that need to be addressed.

JOURNAL OF ADVANCED JOINING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of the adhesive thickness on butt adhesive joints under torsional loads

R. J. C. Carbas et al.

Summary: This study characterized an epoxy based structural adhesive under tensile and shear loads using butt joints with solid adherends, showing a significant effect of adhesive layer thickness on shear strength and stiffness under torsional loads.

JOURNAL OF ADVANCED JOINING PROCESSES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of fatigue of bulk structural adhesives and thick adhesive joints

Peiyuan Zuo et al.

Summary: Studies have investigated the fatigue behavior of structural adhesives mainly in construction industry, focusing on joint configurations and practical applications. Previous research has shown similar material properties in thin adhesive joints, but with thicker bondlines dominating joint behavior as structural adhesives are introduced in construction industry.

INTERNATIONAL MATERIALS REVIEWS (2021)

添加到收藏夹

Article Engineering, Chemical

Statistical adhesion strength of an amorphous polymer-its miscible blend interface self-healed at a temperature below the bulk glass transition temperature

Yuri M. Boiko

JOURNAL OF ADHESION (2020)

添加到收藏夹

Article Engineering, Mechanical

Influence of mode mixity and loading conditions on the fatigue crack growth behaviour of an epoxy adhesive

Joao Monteiro et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Engineering, Chemical

The influence of curing conditions on the strength of adhesive joints

Anna Rudawska

JOURNAL OF ADHESION (2020)

添加到收藏夹

Article Engineering, Mechanical

Fatigue crack growth analysis of different adhesive systems: Effects of mode mixity and load level

Ana V. M. Rocha et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

The influence of mode mixity and adhesive system on the fatigue life of adhesive joints

Fernando Castro Sousa et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)

添加到收藏夹

Article Engineering, Chemical

Mixed mode fracture characterization of brittle and semi-brittle adhesives using the SCB specimen

Arsalan Ajdani et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Engineering, Chemical

A comprehensive experimental study on bi-adhesive single lap joints using DIC technique

F. Ramezani et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Engineering, Chemical

Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry

Jingxin Na et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

添加到收藏夹

Article Engineering, Chemical

An experimental investigation of the fatigue damage behaviour of adhesively bonded joints under the combined effect of variable amplitude stress and temperature variation

B. Schneider et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

添加到收藏夹

Article Engineering, Mechanical

Failure mechanisms and design of dissimilar welds of 9%Cr and CrMoV steels up to very high cycle fatigue regime

Wei-Chang Zhang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Failure mechanisms and fatigue strength reduction factor of a Cr-Ni-Mo-V steel welded joint up to ultra-long life regime

Ming-Liang Zhu et al.

12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) (2018)

添加到收藏夹

Article Engineering, Chemical

Environmental effect on the fatigue degradation of adhesive joints: A review

M. Costa et al.

JOURNAL OF ADHESION (2017)

添加到收藏夹

Article Engineering, Chemical

Influence of Temperature on the Fatigue Behaviour of a Toughened Epoxy Adhesive

V. C. Beber et al.

JOURNAL OF ADHESION (2016)

添加到收藏夹

Article Engineering, Chemical

Effects of Curing Cycle and Thermal History on the Glass Transition Temperature of Adhesives

Y. Zhang et al.

JOURNAL OF ADHESION (2014)

添加到收藏夹

Article Engineering, Chemical

Effect of post-cure on the glass transition temperature and mechanical properties of epoxy adhesives

R. J. C. Carbas et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Chemical

Temperature Dependence of the Fracture Toughness of Adhesively Bonded Joints

M. D. Banea et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Manufacturing

Error identification with a spinning mirror for holography system

H. S. Bang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)

添加到收藏夹

Article Materials Science, Composites

Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading

M. F. S. F. de Moura et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Engineering, Chemical

An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperatures

A. Deb et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2008)

添加到收藏夹

Article Engineering, Chemical

Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives

Lucas F. M. da Silva et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2007)

添加到收藏夹

Article Engineering, Chemical

Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures

LFM Da Silva et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.