期刊
EXPERIMENTAL THERMAL AND FLUID SCIENCE
卷 142, 期 -, 页码 -出版社
ELSEVIER SCIENCE INC
DOI: 10.1016/j.expthermflusci.2022.110818
关键词
Heat Pipe; Bent Heat Pipe; X-ray Tomography; Capillary Limit; Liquid Pressure; Vapor Pressure
This paper proposes a non-destructive method to analyze the impact of bend angle on the thermal performance of a sintered copper wick heat pipe. A calorimeter-based technique is used to characterize the thermal performance of the heat pipe under different bend angles. The results show that the thermal resistance of the heat pipe increases by up to 31% as the pipe is bent by 90 degrees, while the maximum heat input decreases by 29%.
This paper presents a non-destructive methodology to analyze the influence of bend angle on the thermal performance of a sintered copper wick heat pipe. A calorimeter-based technique is used to characterize the thermal performance of a concentric tube sintered wick heat pipe under bending deformation, for a range of bend angles. It is seen that the thermal resistance of this heat pipe increases by up to 31% as the pipe was bent by 90 degrees while its maximum heat input reduces by 29%. X-ray tomography (mu-CT) is used to obtain geometric (pipe diameter, vapor channel, etc.) and morphological (porosity, pore size distribution) data for the pipe and wick at the bend site, and this data is utilized in a thermo-fluidic model of the pipe. The methodology quantifies the local vapor and liquid pressure drops caused by deformations to the wick and vapor channel of the pipe, and their influence on the capillary pressure limit. The X-ray method revealed that, when the heat pipe was bent to 90 degrees, there was a 23% reduction in the vapor core area, a 7% increase in the wick area, and a 48% reduction in permeability at the bend site. These geometric changes accounted for a 12% increase in the vapor phase pressure drop and a 70% increase in the liquid phase pressure drop at the bend site. When compared to the overall capillary limit the increase in liquid pressure drop demonstrated a greater contribution (12 %) in comparison to the vapor pressure drop (0.5%). In spite of the fact that the methodology presents results for a heat pipe under a specific bending case, mu-CT inspection represents a novel diagnostic tool that can underpin the optimization of heat pipe manufacture, in order to mitigate the influence of bending deformations.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据