4.6 Article

Effects of wide-range copper surface wettability on spray cooling heat transfer

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Two-phase spray cooling for high ambient temperature data centers: Evaluation of system performance

Ranjith Kandasamy et al.

Summary: The newly developed spray cooled system offers an energy-saving cooling solution for high-performance servers in data centers, showing better performance in heat dissipation. Key operating parameters include spray nozzle flow rate, condenser fan power, and condenser flow rate.

APPLIED ENERGY (2022)

Article Thermodynamics

Ring droplet formation during evaporation of a sessile water droplet on a biphilic surface

Hui-Chung Cheng et al.

Summary: This study investigated droplet evaporation on biphilic surfaces and found that the formation of a ring-shaped droplet during the evaporation process enhanced the efficiency of evaporation. The experimental results were compared with the theoretical model proposed in the literature.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

About the 3D simulation of the boiling of liquid films and spray droplets during their contact with hot substrates

Chaouki Habchi

Summary: This paper aims to clarify the state of the art in the three-dimensional simulation of boiling of liquid films and spray droplets during their contact with hot substrates. Based on recent experimental and theoretical research, a set of heat transfer models for three-dimensional simulation of spray cooling considering conjugate heat transfer is proposed. These models were implemented in a computational fluid dynamics solver and validated using experimental data.

HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Parametric study of heat transfer characteristics of enhanced surfaces in a spray cooling system: An experimental investigation

Azzam S. Salman et al.

Summary: This study conducted experiments to investigate the effects of nozzle-to-surface distance, coolant flow rate, and temperature difference on the heat transfer characteristics of enhanced surfaces in a spray cooling system. The results showed that radial grooves and surface structures played a crucial role in improving heat transfer performance.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Experimental study on active control of refrigerant emergency spray cooling of thermal abnormal power battery

Yubin Liu et al.

Summary: This paper proposes an active control method of refrigerant spray to inhibit heat and combustion in thermal accidents for electric vehicle batteries, achieving rapid cooling and flame suppression through collaborative control of the spray nozzle and venting port.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Experimental study on heat transfer and power consumption of low-pressure spray cooling

Liansheng Liu et al.

Summary: The study constructed an experimental system to investigate the heat transfer characteristics and power consumption of low-pressure spray cooling comprehensively. It was found that the heat transfer coefficient can reach 1.8 W/cm(2) K at low spray pressure, and the optimal spray height varied with different spray pressures. A performance evaluation criterion was proposed to quantify the overall performance of the spray, with the highest value observed at low pressures, indicating an optimal height for maximizing performance.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Investigation on a gas-atomized spray cooling upon flat and micro-structured surfaces

Ji-Xiang Wang et al.

Summary: The study investigates the application of gas-atomized spray cooling technology in electronics cooling, validates its advantages in improving the heat transfer coefficient through experimental data, and provides a mechanism explanation.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Review Engineering, Aerospace

Review of aerospace-oriented spray cooling technology

Ji-Xiang Wang et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

Article Thermodynamics

Thermal characteristics and effects of oil spray cooling on in-wheel motors in electric vehicles

Myeong Hyeon Park et al.

APPLIED THERMAL ENGINEERING (2019)

Article Thermodynamics

Experimental investigation on spray cooling with low-alcohol additives

Hong Liu et al.

APPLIED THERMAL ENGINEERING (2019)

Article Thermodynamics

Enhancement mechanism of high alcohol surfactant on spray cooling: Experimental study

Wei-Wei Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

An experimental investigation of sessile droplets evaporation on hydrophilic and hydrophobic heating surface with constant heat flux

Ming Gao et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Investigation on the influence of injection direction on the spray cooling performance in natural draft dry cooling tower

Yubiao Sun et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Experimental investigation on the performance of a water spray cooling system

Zhou Nianyong et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Water spray cooling technique applied on a photovoltaic panel: The performance response

S. Nizetic et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Article Thermodynamics

An investigation on spray cooling using saline water with experimental verification

M. H. Sadafi et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Article Thermodynamics

Spray cooling heat transfer on microstructured thin film enhanced surfaces

Shou-Shing Hsieh et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

An experimental comparison of heat transfer characteristic between R134-a and R22 in spray cooling

Shuangtao Chen et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

Experimental study on the characteristics of a closed loop R134-a spray cooling

Yu Hou et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Article Thermodynamics

Experimental investigation of spray cooling on micro-, nano- and hybrid-structured surfaces

Zhen Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Thermodynamics

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles

Dong Hyun Lim et al.

APPLIED THERMAL ENGINEERING (2014)

Article Chemistry, Physical

Evaporation of a sessile water drop on a heated surface with controlled wettability

Elizaveta Ya Gatapova et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)

Article Thermodynamics

Study of heat transfer enhancement for structured surfaces in spray cooling

J. L. Xie et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Effects of particle volume fraction on spray heat transfer performance of Al2O3-water nanofluid

Tong-Bou Chang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Article Thermodynamics

Surface wettability effects on critical heat flux of boiling heat transfer using nanoparticle coatings

Chin-Chi Hsu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Article Engineering, Manufacturing

Thermal Management of Power Inverter Modules at High Fluxes via Two-Phase Spray Cooling

Huseyin Bostanci et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2012)

Editorial Material Nanoscience & Nanotechnology

Pool boiling of nanoparticle-modified surface with interlaced wettability

Chin-Chi Hsu et al.

NANOSCALE RESEARCH LETTERS (2012)

Article Thermodynamics

Experimental study on the effects of spray inclination on water spray cooling performance in non-boiling regime

Yaqing Wang et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)

Article Engineering, Manufacturing

Two-Phase Spray Cooling of Hybrid Vehicle Electronics

Issam Mudawar et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)

Article Engineering, Manufacturing

Application of Two-Phase Spray Cooling for Thermal Management of Electronic Devices

Milan Visaria et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)

Article Thermodynamics

Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism

Hai Trieu Phan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Article Thermodynamics

Spray cooling on micro structured surfaces

Christof Sodtke et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Thermodynamics

Direct simulation of spray cooling: Effect of vapor bubble growth and liquid droplet impact on heat transfer

R. Panneer Selvam et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Article Physics, Fluids & Plasmas

Evaporative deposition patterns: Spatial dimensions of the deposit

YO Popov

PHYSICAL REVIEW E (2005)

Article Thermodynamics

Spray cooling characteristics of water and R-134a. Part 1: nucleate boiling

SS Hsieh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Article Dermatology

Evaluation of cryogen spray cooling exposure on in vitro model human skin

BS Kao et al.

LASERS IN SURGERY AND MEDICINE (2004)

Article Materials Science, Multidisciplinary

A transient simulation and dynamic spray cooling control model for continuous steel casting

RA Hardin et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

Article Thermodynamics

Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling

DP Rini et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)