☆ 4.7 Article

A framework for estimating the fracture resistance of hot mix asphalt using an energy approach

ENGINEERING FRACTURE MECHANICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations

Seyed Ataollah Saed et al.

Summary: This study investigated the mixed-mode I/II fracture behavior of asphalt mixtures using a new test configuration, and found that the addition of RAP materials into asphalt mixtures improved fracture toughness and energy. The results also indicated that the addition of a rejuvenating agent further increased the fracture parameters values in both sample types.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Investigations on fatigue properties of red sandstone under positive and negative pure bending loads

Zhi Wang et al.

Summary: This study conducted fatigue tests with positive and negative stress ratios under pure bending using a four-point bending fixture, and found that stress level and stress ratio are two main factors affecting fatigue life. Under pure bending fatigue load, the damage curve can be divided into three stages of initial, stable, and accelerated law.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Effect of marshal and gyratory compaction methods on cracking characteristics of hot mix asphalt concrete materials under all three basic modes of fracture

Pegah Jafari Haghighatpour et al.

Summary: This research experimentally studied the effect of HMA compaction method on cracking behavior and fracture toughness, as well as the influence of adding RAP material on fracture behavior. The experimental results show significant effects of loading mode, RAP content, and compaction method on the fracture behavior of tested HMA materials.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Effect of specific heat capacity of aggregates and nano-graphite on self-healing of hot mix asphalt under microwave radiation

Alireza Khavandi Khiavi et al.

Summary: This paper investigates the effect of nano-graphite as a conductive additive and specific heat capacities of aggregates on the self-healing performance of asphalt mixtures. The experimental results show that 10% of nano-graphite has a good effect on restoring the tensile strength of broken samples, and the mixture with granite aggregates requires less heating energy.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Performance evaluation of waterborne epoxy resin modified emulsified asphalt mixtures for asphalt pavement pothole repair

Ouming Xu et al.

Summary: This study investigated the effects of waterborne epoxy resin (WER) modified asphalt emulsion on the construction properties and pavement performance of cold patch mixtures. The results showed that the use of WER improved the early strength and curing time of the cold patch mixtures and maintained good storage characteristics. The high-temperature and moisture stability of the cold patch mixtures increased with the dose of WER, but the low-temperature characteristic exhibited adverse trends.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Mechanics

Laboratory investigation of the bonding performance between open-graded friction course and underlying layer

Weimin Song et al.

Summary: This study investigated the fracture performance between OGFC and different underlying layers. The results showed that the difference in interface parameters led to differences in optimal tack coat application rates and fracture resistance.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Environmental and economic comparison of semi-rigid and flexible base asphalt pavement during construction period

Rui Zhang et al.

Summary: This study used process life cycle assessment (LCA) and process life cycle cost (LCC) methods to investigate the impacts of design parameters on the environmental and economic performances of asphalt pavement. The results showed that the type of pavement, resilient modulus of subgrade, thickness of adjustable layer, traffic level, and the annual average daily traffic volume of vehicles influenced the energy consumption, greenhouse gas emissions, construction budget, and environmental and economic costs of asphalt pavement. The study found that the energy consumption and greenhouse gas emissions of flexible base asphalt pavement were lower than that of semi-rigid base asphalt pavement, but the construction budget and environmental economy cost were higher.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Construction & Building Technology

Extended finite element modeling of hot mix asphalt based on the semi-circular bending test

Weimin Song et al.

Summary: Semi-circular bending (SCB) test was conducted to characterize the fracture behaviors of asphalt mixtures with different aggregate shapes. XFEM simulation was used to observe the initiation and propagation of cracks under different temperatures. The results showed that the shape of aggregates has an effect on the failure load and dissipated fracture energy in SCB test.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel approach to determine mode II fracture toughness of hot mix asphalt

Weimin Song et al.

Summary: This study proposed a method to test the mode II fracture behaviors of hot mix asphalt (HMA) and examined the effects of reclaimed asphalt pavement (RAP) and rejuvenator on the mode II fracture performance of HMA. Results indicated that with the increase of RAP, the fracture performance of HMA decreased, while the use of rejuvenator benefited the mode II fracture resistance.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Mechanics

Effect of RAP and glass fiber on mode I fracture behaviors of ultra-thin friction course

Weimin Song et al.

Summary: This study investigated the effects of reclaimed asphalt pavement (RAP) and glass fiber on the fracture behaviors of ultra-thin friction course (UTFC) at low and intermediate temperatures. The results showed that the incorporation of RAP weakened the fracture resistance of UTFC at low temperature, while the addition of glass fiber counteracted this adverse effect. UTFC exhibited the best cracking resistance at intermediate temperature, but the incorporation of RAP deteriorated the fracture resistance. The addition of both RAP and glass fiber further deteriorated the fracture performance, possibly due to the non-uniform distribution of fiber.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Fatigue behaviours of asphalt mixture at different temperatures in four-point bending and indirect tensile fatigue tests

Huailei Cheng et al.

Summary: The study explores the impact of temperature on the fatigue life of asphalt mixtures, finding that temperature affects fatigue life differently in 4 PB and IDT tests. The proposed N-f = a(1/F)(b)e(cT) model describes the relationships between fatigue life, temperature, and stress/strain level, providing reference data for evaluating the fatigue resistance of asphalt layers under various conditions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

The role of binders in mixture cracking resistance measured by ideal-CT test

Hui Chen et al.

Summary: The study utilized LAS and BYET tests to define the role of binders in mixture behavior in IDEAL-CT tests.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Review Construction & Building Technology

Asphalt-based cold patches for repairing road potholes - An overview

Raheb Hafezzadeh et al.

Summary: This article provides a critical comparison between using Cold Mix Patching Materials (CMPMs) and Hot Mix Asphalt (HMA) in repairing potholes, covering various aspects such as repair techniques, productivity, and costs. By investigating the impact of crucial factors on the performance of CMPMs, it is noted that there is a growing worldwide interest in these solutions that initially started as fragmented industrial initiatives.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Characterizing the fatigue cracking behaviors of OGFC pavements using the overlay tester

Hao Wu et al.

Summary: This study evaluated the fatigue performance of OGFC-AC composite specimens, finding that contaminants can weaken peak tensile stress and a power exponential relation exists between dissipated energy and load cycles. OGFC13 showed superior fatigue cracking resistance, and an optimal tack coat application rate of 0.4 kg/m(2) was identified for OGFC-AC composites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Investigation of the adhesive and cohesive properties of asphalt, mastic, and mortar in porous asphalt mixtures

Xiaowei Wang et al.

Summary: The study found that the cohesive strength of asphalt, mastic, and mortar increases with the increase in dynamic viscosity of asphalt. As temperature increases, the failure type of asphalt changes from adhesive to cohesive failure, while the failure types of mastic and mortar change from cohesive to adhesive failure. Under wet conditions, adhesive failure was observed in asphalt, and the failure types of mastic and mortar changed from cohesive to adhesive failure with increasing moisture damage.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Characterisation of cracking resistance in modified hot mix asphalt under repeated loading using digital image analysis

Hasanain Radhi Radeef et al.

Summary: Laboratory testing of fatigue characteristics of asphalt mixtures containing plastic waste and crumb rubber showed that rubberised asphalt mixtures promote crack propagation and failure stages, while plastic waste-modified asphalt mixtures function to increase bonding properties. Digital image analysis revealed higher crack tortuosity, crack density, and fractal dimension in modified asphalt mixtures, indicating increased cracking resistance.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Construction & Building Technology

The viscoelastic characterisation of asphalt mixtures using the indentation test

Hassan Fadil et al.

Summary: The study investigated the use of spherical indentation testing for measuring the viscoelastic properties of asphalt, suggesting it as a potential alternative experimental technique capable of characterizing small material volumes. It has the potential to become a useful tool for characterizing thin asphalt layers and measuring binder phase properties in-situ in asphalt mixtures. A new statistical analysis methodology was proposed and examined for viscoelastic characterization of the mastic phase in mastic asphalt mixtures.

ROAD MATERIALS AND PAVEMENT DESIGN (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Improving the rutting resistance of asphalt pavement modified with the carbon nanotubes additive

Mohammed Q. Ismael et al.

Summary: This study demonstrated the effectiveness of utilizing industrial carbon nanotubes (CNT) as a strengthening additive for asphalt pavement rutting resistance, with higher viscosity bitumen consuming relatively less CNT but achieving better performance. Cost analysis indicated that mixing 1.5% of CNT with 40/50 bitumen reached the threshold of economic feasibility.

AIN SHAMS ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Construction & Building Technology

Comparison of two criteria of stress intensity factor and fracture energy to investigate the behavior of asphalt mixtures under combined tensile-shear loading modes-A statistical approach

Sasan Mehdinejad et al.

Summary: The research demonstrates that the fracture behavior of asphalt mixtures is significantly influenced by testing temperature and loading rate, while the correlation between fracture energy and stress intensity factor is affected by loading mode, loading speed, and testing temperature.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Fracture investigation of asphalt mixtures containing reclaimed asphalt pavement using an equivalent energy approach

Weimin Song et al.

Summary: Asphalt concrete exhibits different fracture behaviors at low and intermediate temperatures, with stress intensity factor (K-IC) and energy release rate (J-integral) commonly used to evaluate fracture performance. This study introduced an equivalent stress intensity factor (K*(IC)) to assess the fracture toughness of asphalt concrete at a wider temperature range. Test results indicate that the addition of reclaimed asphalt pavement (RAP) enhances fracture performance at intermediate temperatures. Furthermore, the use of a rejuvenator was found to be effective in improving fracture resistance at both low and intermediate temperatures.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Construction & Building Technology

Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber

Hassan Ziari et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Damage analysis four-point bending fatigue tests on stone matrix asphalt using dissipated energy approaches

Xiaolong Zou et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Construction & Building Technology

Analysis of factors that influence anti-rutting performance of asphalt pavement

Rui Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Evaluation of thermal and anti-rutting behaviors of thermal resistance asphalt pavement with glass microsphere

Yinfei Du et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Crack resistance investigation of mixtures with reclaimed SBS modified asphalt pavement using the SCB and DSCT tests

Jie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Fatigue performance of hot mix asphalt tested in controlled stress mode using dynamic shear rheometer

Taher M. Ahmed

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

New machine learning-based prediction models for fracture energy of asphalt mixtures

Hamed Majidifard et al.

MEASUREMENT (2019)

添加到收藏夹

Article Construction & Building Technology

Fatigue cracking performance evaluation of laboratory-produced polymer modified asphalt mixture containing reclaimed asphalt pavement material

Zhou Zhou et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Estimation of total fatigue life for in-service asphalt mixture based on accelerated pavement testing and four-point bending beam fatigue tests

Zexin Ma et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Characterization of two-parameter fracture properties of portland cement concrete containing reclaimed asphalt pavement aggregates by semicircular bending specimens

Xijun Shi et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance

Mohammadreza Sabouri et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Refining the indirect tensile (IDT) Nflex Factor test to evaluate cracking resistance of asphalt mixtures for mix design and quality assurance

Fan Yin et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Research on the fatigue equation of asphalt mixtures based on actual stress ratio using semi-circular bending test

Jiwang Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Mechanics

Mixed mode tensile - In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions

M. Fakhri et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Engineering, Mechanical

Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures

Mohamed Elkashef et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement

Weimin Song et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Construction & Building Technology

Comprehensive Fatigue Mechanism of Asphalt Mixtures: Synergistic Study of Crack Initiation and Propagation

Gourab Saha et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

添加到收藏夹

Review Construction & Building Technology

Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements

Xue Luo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Top-down cracking self-healing of asphalt pavements with steel filler from industrial waste applying microwaves

Miguel A. Franesqui et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Construction & Building Technology

The feasibility of continuous construction of the base and asphalt layers of asphalt pavement to solve the problem of reflective cracks

Huiming Fang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Strengthening of hot-mix asphalt mixtures reinforced by polypropylene-impregnated multifilament glass fibres and scraps

Pyeong Jun Yoo et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Mechanics

Fracture damage evaluation of asphalt mixtures using Semi-Circular Bending test based on fracture energy approach

Gourab Saha et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Construction & Building Technology

Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam

Guowei Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Engineering, Mechanical

The combined effect of loading frequency, temperature, and stress level on the fatigue life of asphalt paving mixtures using the IDT test configuration

Ghazi G. A-Khateeb et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Construction & Building Technology

Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fenix and semi-circular bending tests

Felix Perez-Jimenez et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Mechanics

Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures

Baoshan Huang et al.

ENGINEERING FRACTURE MECHANICS (2013)

添加到收藏夹

Article Construction & Building Technology

Development of Fracture Resistance Curves for Asphalt Concrete

Andrew Braham et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

添加到收藏夹

Article Engineering, Civil

Fenix Test Development of a New Test Procedure for Evaluating Cracking Resistance in Bituminous Mixtures

Felix Perez-Jimenez et al.

TRANSPORTATION RESEARCH RECORD (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Disk-shaped compact tension test for asphalt concrete fracture

MP Wagoner et al.

EXPERIMENTAL MECHANICS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.