4.7 Article

Turbulent fluidization and transition velocity of Geldart B granules in a spout-fluidized bed reactor

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective

Yuanhe Yue et al.

Summary: This study investigates the instability problem of alternating spout deflection in spout-fluidized beds and proposes three different geometrical designs to mitigate the issue. Design I and Design II show potential in reducing the amplitude of spout deflection, while Design III affects the frequency of the spout deflection. The findings aim to improve the hydrodynamics stability in spout fluidized beds.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

CFD-DEM-VDGM method for simulation of particle fluidization behavior in multi-ring inclined-hole spouted fluidized bed

Meng Chen et al.

Summary: A virtual dual-grid model (VDGM) is proposed to calculate solid volume fraction in unstructured grids and speed up the calculation of particle fluidization behavior in complex geometry. The VDGM can effectively calculate solid volume fraction and increase calculation speed. The study provides detailed analysis of particle fluidization behavior in a multi-ring inclined-hole spouted fluidized bed with 4.2 million high-density particles.

PARTICUOLOGY (2021)

Article Engineering, Chemical

Simulation of coal pressurized pyrolysis process in an industrial-scale spout-fluid bed reactor

Guanwen Zhou et al.

ADVANCED POWDER TECHNOLOGY (2019)

Article Engineering, Chemical

Mixing behaviors in an industrial-scale spout-fluid mixer by 3D CFD-TFM

Xuejiao Liu et al.

POWDER TECHNOLOGY (2017)

Article Engineering, Environmental

Hydrodynamic behavior of silicon particles with a wide size distribution in a draft tube spout-fluid bed

Yuemei Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Engineering, Chemical

DEM numerical investigation of wet particle flow behaviors in multiple-spout fluidized beds

Tianqi Tang et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Article Engineering, Environmental

CFD-DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Combined phase distribution and particle velocity measurement in spout fluidized beds by ultrafast X-ray computed tomography

Martina Bieberle et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Comparison of DEM simulation and experiments in a dual-column slot-rectangular spouted bed with a suspended partition

Ziliang Wang et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Chemical

Influence of operating parameters and flow regime on solid dispersion behavior in a gas-solid spout-fluid bed

Shiliang Yang et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Article Engineering, Environmental

Numerical investigation of the time-related properties of solid phase in a 3-D spout-fluid bed

Kun Luo et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Review Engineering, Chemical

An offset-method for Euler-Lagrange approach

Falah Alobaid

CHEMICAL ENGINEERING SCIENCE (2015)

Article Engineering, Chemical

Experimental and numerical investigations of a pseudo-2D spout fluidized bed with draft plates

Vinayak S. Sutkar et al.

POWDER TECHNOLOGY (2015)

Article Engineering, Environmental

Study on the flow behavior in spout-fluid bed with a draft tube of sub-millimeter grade silicon particles

Guoliang Su et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Engineering, Environmental

Influences of operating parameters on the hydrodynamics of a 3-D spout-fluid bed based on DEM modeling approach

Shiliang Yang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Engineering, Chemical

Numerical study on spout elevation of a gas-particle spout fluidized bed in microwave-vacuum dryer

Guangyuan Jin et al.

JOURNAL OF FOOD ENGINEERING (2014)

Article Engineering, Chemical

Experimental investigations of a pseudo-2D spout fluidized bed with draft plates

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Article Engineering, Chemical

Spout fluidized beds: Recent advances in experimental and numerical studies

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Review Engineering, Chemical

Recent Advances of Spout-Fluid Bed: A Review of Fundamentals and Applications

Yingjuan Shao et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2013)

Article Engineering, Chemical

Numerical and experimental study on multiple-spout fluidized beds

Maureen S. van Buijtenen et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Article Energy & Fuels

Experiment on particle mixing in flat-bottom spout-fluid bed

Yong Zhang et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2009)

Article Chemistry, Applied

An investigation of MSW gasification in a spout-fluid bed reactor

Maitri Thamavithya et al.

FUEL PROCESSING TECHNOLOGY (2008)

Article Engineering, Chemical

Low temperature drying of pomace in spout and spout-fluid beds

L. Marmo

JOURNAL OF FOOD ENGINEERING (2007)

Article Energy & Fuels

Flow pattern and transition of rectangular spout-fluid bed

Wenqi Zhong et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2006)

Article Engineering, Chemical

Hydrodynamics of turbulent fluidized beds of different diameters

N Ellis et al.

POWDER TECHNOLOGY (2004)

Article Engineering, Chemical

Hydrodynamics and stability of slot-rectangular spouted beds. Part I: Thin bed

OM Dogan et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2000)