4.5 Article

The Design and Fabrication of Multiple-Transmitter Coils and Single-Receiver Coils for a Wireless Power Transfer System to Charge a 3s LiPo Drone's Battery

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Efficiency of the Wireless Power Transfer System with Planar Coils in the Periodic and Aperiodic Systems

Jacek Maciej Stankiewicz et al.

Summary: This study presented the results of numerical and analytical analysis of the Wireless Power Transfer System (WPT). It found that circular coils had higher efficiency in periodic models, while square coils had higher efficiency in aperiodic models, with aperiodic models overall showing higher efficiency values compared to periodic models.

ENERGIES (2022)

Article Energy & Fuels

Analysis and Design of a Multi-Resonant Circuit for Applications of Wireless Capacitive Power Transmission

Eduardo Salvador Estevez-Encarnacion et al.

Summary: This paper presents an analysis and design methodology for applying the Z-tank resonant circuit to capacitive power transmission, overcoming the sensitivity of capacitive technology to distance between plates and achieving stable resonance frequency and high energy transfer.

ENERGIES (2022)

Article Automation & Control Systems

High Efficiency Thermoelectric Temperature Control System With Improved Proportional Integral Differential Algorithm Using Energy Feedback Technique

Ning Wang et al.

Summary: This article proposes an efficient thermoelectric temperature control system based on an improved PID algorithm with energy feedback technology. The system utilizes two groups of batteries for efficient charging and discharging, and the improved PID algorithm uses a state machine to control thermoelectric coolers through pulsewidth modulation. An energy feedback circuit and synchronous switching technology are designed to recycle energy and improve energy utilization efficiency.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Article Computer Science, Information Systems

Using Overlapped Resonators in Wireless Power Transfer for Uniform Electromagnetic Field and Removing Blank Spots in Free Moving Applications

Saeideh Pahlavan et al.

Summary: The study introduces an induction link mechanism based on overlapping arrays to eliminate blank spots in the electromagnetic field and achieve a balanced distribution in moving object applications. Results show that using overlapping arrays can improve power transmission efficiency and provide better power tolerance compared to non-overlapping scenarios.

ELECTRONICS (2022)

Article Energy & Fuels

A Parameter Design Method for a Wireless Power Transmission System with a Uniform Magnetic Field

Li Ji et al.

Summary: In this paper, an optimized double-D (DD) coil design is proposed to improve the system's anti-offset ability by dividing the wires into two groups. Experimental results show that this design has high magnetic field uniformity and transmission efficiency, and can be applied to the design of other types of coils.

ENERGIES (2022)

Article Energy & Fuels

A 5.8 GHz π-Stub Decoupling Network for Receiving Antenna Arrays in Microwave Wireless Power Transmission

Xinyuan Li et al.

Summary: This paper proposes a 5.8 GHz pi-stub decoupling network to enhance the performance of a receiving antenna array in microwave wireless power transmission systems. The results demonstrate that the performance of the array is greatly improved by loading the pi-stub decoupling network, with up to 36.4% increase in receiving power. The scalability and effectiveness of the network are also showcased, indicating its significant potential in large-scale receiving arrays.

ENERGIES (2022)

Article Energy & Fuels

Inductive Power Transfer Battery Charger with IR-Based Closed-Loop Control

Po-Hsuan Chen et al.

Summary: In this paper, a wireless battery charger using inductive power transfer (IPT) is proposed. The charger achieves constant-current constant-voltage (CC-CV) charging through a closed-loop controlled IPT. It can smoothly transition between the CC stage and the CV stage by swapping resonant capacitors. The charging voltage and current are regulated by controlling the phase-shifted angle of the high-frequency inverter on the primary side. The charger demonstrates stable charging current in the CC stage and smooth transition into the CV stage.

ENERGIES (2022)

Article Energy & Fuels

Efficiency Improvement of Magnetic Coupler with Nanocrystalline Alloy Film for UAV Wireless Charging System with a Carbon Fiber Fuselage

Fengshuo Yang et al.

Summary: Existing research on UAV wireless charging systems has often overlooked the impact of the UAV fuselage on the efficiency of the magnetic coupler. This study proposes a design that utilizes nanocrystalline cores to reduce the loss caused by the UAV fuselage. By optimizing the parameters of the asymmetric circular coils and modeling the fuselage as an additional coil, the impact of eddy current loss induced by the fuselage is revealed. The use of an optimized nanocrystalline alloy film further improves the efficiency of the coupler.

ENERGIES (2022)

Article Engineering, Multidisciplinary

Using Drones for Thermal Imaging Photography and Building 3D Images to Analyze the Defects of Solar Modules

Kuo-Chien Liao et al.

Summary: This research uses drones and MATLAB (R) image analysis to detect failures in solar modules and evaluate their health. The use of drones significantly improves inspection efficiency, and a new box filtering method enhances the 3D image for more convenient and accurate health checks. The study also shows that the 3D image recognition technology provides better defect diagnosis capability and serves as a quantitative and qualitative indicator.

INVENTIONS (2022)

Article Remote Sensing

Novel Drone Design Using an Optimization Software with 3D Model, Simulation, and Fabrication in Drone Systems Research

Ahmed O. MohamedZain et al.

Summary: This paper presents the design process and results of a small size Unmanned Aerial Vehicle (UAV) using the 3DEXPERIENCE software. It provides detailed information on the design steps, material selection, and simulation analysis.

DRONES (2022)

Review Computer Science, Information Systems

A Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards

Prithvi Krishna Chittoor et al.

Summary: Unmanned Aerial Vehicles (UAVs) are gaining popularity in various fields, especially in applications such as parcel delivery. The future of UAV charging faces important challenges and the need for non-contact multi-device charging techniques. Research explores the importance and future trends of UAV charging technology.

IEEE ACCESS (2021)

Article Engineering, Electrical & Electronic

Design of UAV wireless power transmission system based on coupling coil structure optimization

Yixin Yan et al.

EURASIP JOURNAL ON WIRELESS COMMUNICATIONS AND NETWORKING (2020)

Article Engineering, Multidisciplinary

INVESTIGATION OF MAGNETIC PROPERTIES FOR DIFFERENT COIL SIZES OF DYNAMIC WIRELESS CHARGING PADS FOR ELECTRIC VEHICLES (EV)

Syasya Azra Zaini et al.

IIUM ENGINEERING JOURNAL (2020)

Article Engineering, Electrical & Electronic

Design and Analysis of Quasi-Omnidirectional Dynamic Wireless Power Transfer for Fly-and-Charge

Wei Han et al.

IEEE TRANSACTIONS ON MAGNETICS (2019)

Proceedings Paper Multidisciplinary Sciences

Matlab Design and Power Analysis of MPPT Controller for Solar PV Using Perturb and Observation Algorithm

Ahmed O. Mohamed Zain et al.

ADVANCED SCIENCE LETTERS (2018)

Article Computer Science, Information Systems

Development of Intelligent Drone Battery Charging System Based on Wireless Power Transmission Using Hill Climbing Algorithm

Ali Rohan et al.

APPLIED SYSTEM INNOVATION (2018)

Editorial Material Engineering, Aerospace

Autonomous Quadrotor for Accurate Positioning

Lucas Moraes et al.

IEEE AEROSPACE AND ELECTRONIC SYSTEMS MAGAZINE (2017)

Article Engineering, Electrical & Electronic

Modeling and Optimization of Magnetically Coupled Resonant Wireless Power Transfer System With Varying Spatial Scales

Fuxin Liu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Optimal Photovoltaic Array Configuration Under Gaussian Laser Beam Condition for Wireless Power Transmission

Weiyang Zhou et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Aerospace

Design and implementation of autonomous wireless charging station for rotary-wing UAVs

Ali Bin Junaid et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

Article Engineering, Electrical & Electronic

A Compact 60-GHz Wireless Power Transfer System

Med Nariman et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2016)

Article Engineering, Electrical & Electronic

Capacitive Power Transfer Through a Conformal Bumper for Electric Vehicle Charging

Jiejian Dai et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2016)

Article Engineering, Electrical & Electronic

Magnetic Resonance Wireless Power Transfer using Three-Coil System with Single Planar Receiver for Laptop Applications

Van Thuan Nguyen et al.

IEEE TRANSACTIONS ON CONSUMER ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

Autonomous Polyphase Current-Fed Push-Pull Resonant Converter Based on Ring Coupled Oscillators

Ali Abdolkhani et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

Optimal Matched Rectifying Surface for Space Solar Power Satellite Applications

Rong Wang et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2014)