☆ 4.2 Article

Model Predictive Torque Control-Based Induction Motor Drive with Remote Control and Monitoring Interface for Electric Vehicles

ELECTRIC POWER COMPONENTS AND SYSTEMS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Sliding Model-Based Predictive Torque Control of Induction Motor for Electric Vehicle

V Kousalya et al.

Summary: This article presents a sliding model-based predictive torque control (S-PTC) method for an induction motor in electric vehicle applications. The control algorithm is verified experimentally to demonstrate its effectiveness and robustness.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Power Sharing Control Algorithm for Direct Integration of Fuel Cells in a Dual-Inverter Electric Vehicle Drivetrain

Mehanathan Pathmanathan et al.

Summary: This article proposes a method to directly integrate a fuel cell into a dual-inverter-based EV drive for maintaining unidirectional power flow. A power sharing algorithm is introduced to control power flow and prevent unnecessary shutdown of the fuel cell. The injection of motor reactive current is a key aspect of this algorithm for achieving desired fuel cell power transfer.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

添加到收藏夹

Article Energy & Fuels

Encoderless Parallel Predictive Torque Control for Induction Machine Using a Robust Model Reference Adaptive System

Haotian Xie et al.

Summary: This paper proposes a robust model reference adaptive system (MRAS) estimator for parallel predictive torque control (PPTC) scheme. It determines the weighting factor that modifies the relative importance of control objectives by evaluating torque and flux tracking error terms. The paper also reduces hardware complexity by employing an encoderless MRAS-based estimator for rotor speed and stator flux estimation.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Latest Advances of Model Predictive Control in Electrical DrivesuPart I: Basic Concepts and Advanced Strategies

Jose Rodriguez et al.

Summary: This article summarizes the most relevant research contributions in the application of model predictive control in electrical drives in recent years. It mainly focuses on three issues: weighting factor calculation, harmonic distortion optimization, and robustness improvement.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

添加到收藏夹

Article

Precise Electro-thermal Power Loss Model of a Three-level ANPC Inverter with Hybrid Si/SiC Switches

Dereje Woldegiorgis et al.

Chinese Journal of Electrical Engineering (2022)

添加到收藏夹

Proceedings Paper Energy & Fuels

MRAS Based Model Predictive Torque Control of Induction Motor Drive for Electric Vehicles

Aydin Boyar et al.

Summary: The number of fossil fuel vehicles is increasing worldwide, leading to an increased focus on zero-emission electric vehicles (EVs). Depending on the type of motor, EVs use converter and inverter topologies in their structure. This study focuses on the three-phase three-level active neutral point clamping (ANPC) inverter topology, chosen for its high power quality. Induction motors, known for their simple structure and low maintenance costs, are widely used in EVs. The study models a speed sensorless induction motor drive for EVs, using a model predictive controller (MPC) developed for torque control and a model reference adaptive system (MRAS) method for obtaining the speed value. The proposed induction motor drive for EVs is analyzed under varying speed and torque values.

2022 IEEE 4TH GLOBAL POWER, ENERGY AND COMMUNICATION CONFERENCE (IEEE GPECOM2022) (2022)

添加到收藏夹

Article Automation & Control Systems

Model-Free Predictive Current Control of PMSM Drives Based on Extended State Observer Using Ultralocal Model

Yongchang Zhang et al.

Summary: This article proposes an improved model-free predictive current control method based on PMSM drives, which does not require motor parameters, reduces tuning work, and has a shorter computational time while achieving better performance.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Proceedings Paper Energy & Fuels

Design of Model Predictive Controller for Current Control of ANPC Inverter

Aydin Boyar et al.

Summary: Inverters play a crucial role in power conversion, and multilevel inverters are widely used due to their low voltage stress, low harmonics, and high power quality. The developed model predictive controller in this study can effectively control the output current of the ANPC inverter.

2021 IEEE 3RD GLOBAL POWER, ENERGY AND COMMUNICATION CONFERENCE (IEEE GPECOM2021) (2021)

添加到收藏夹

Proceedings Paper Engineering, Electrical & Electronic

An Improved Space Vector Modulation for Short-Circuit Fault-Tolerance in Multi-Level Hybrid-ANPC

Laith M. Halabi et al.

Summary: This paper introduces a creative method for tolerating short circuit faults by generating a new switching sequence and reference signals in hybrid ANPC converters. The operation under short circuit faults is analyzed, and a fault tolerance strategy is proposed to maintain healthy operation without additional hardware and special requirements for high voltage levels.

2021 24TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2021) (2021)

添加到收藏夹

Proceedings Paper Energy & Fuels

Performance Evaluation of Si/SiC Hybrid Switch-Based Three-Level Active NPC Converter

Haichen Liu et al.

Summary: A hybrid switch consisting of high current-rated silicon (Si) IGBT and low current-rated silicon carbide (SiC) MOSFET has been proposed to improve inverter efficiency and lower device cost. Experimental results show that the Si/SiC hybrid switch-based three-level active neutral point clamped (3L-ANPC) inverter achieved 2% and 1.8% efficiency improvement at light load and heavy load compared to the conventional full Si IGBT inverter.

2021 THIRTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2021) (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

A Review on Electric Vehicles: Technologies and Challenges

Julio A. Sanguesa et al.

Summary: This paper reviews the developments in Electric Vehicles (EVs), focusing on battery technology, charging methods, and future prospects. It also highlights research challenges and opportunities in the industry.

SMART CITIES (2021)

添加到收藏夹

Article Computer Science, Information Systems

Design and Implementation of Multilevel Inverters for Electric Vehicles

C. Dhanamjayulu et al.

Summary: This study proposes a 53-level multilevel inverter topology based on a switched capacitor approach, which achieves 17 and 33 levels of output voltage through cascade connection. The design is simple and cost-effective, with experimental results demonstrating stable operation under dynamic load variations.

IEEE ACCESS (2021)

添加到收藏夹

Article Energy & Fuels

A High-Efficiency Three-Level ANPC Inverter Based on Hybrid SiC and Si Devices

Zhijian Feng et al.

ENERGIES (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Parallel Predictive Torque Control for Induction Machines Without Weighting Factors

Fengxiang Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Model Predictive Control Method With NP Voltage Balance by Offset Voltage Injection for Three-Phase Three-Level NPC Inverter

Eun-Su Jun et al.

IEEE ACCESS (2020)

添加到收藏夹

Review Computer Science, Information Systems

Design Approaches and Control Strategies for Energy-Efficient Electric Machines for Electric Vehicles-A Review

Lingyun Shao et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Automation & Control Systems

Modified predictive torque control method of induction machines for torque ripple reduction

Dubravko Kruselj et al.

AUTOMATIKA (2019)

添加到收藏夹

Article Automation & Control Systems

Efficient Predictive Torque Control for Induction Motor Drive

M. Mamdouh et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

添加到收藏夹

Review Computer Science, Hardware & Architecture

Internet of Things (loT): A review of enabling technologies, challenges, and open research issues

Alem Colakovic et al.

COMPUTER NETWORKS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Continuous Control Set-Model Predictive Control for Torque Control of Induction Motors in a Wide Speed Range

Abdelsalam A. Ahmed et al.

ELECTRIC POWER COMPONENTS AND SYSTEMS (2018)

添加到收藏夹

Review Computer Science, Hardware & Architecture

Internet of Things security: A survey

Fadele Ayotunde Alaba et al.

JOURNAL OF NETWORK AND COMPUTER APPLICATIONS (2017)

添加到收藏夹

Article Automation & Control Systems

Model-Based Predictive Direct Control Strategies for Electrical Drives: An Experimental Evaluation of PTC and PCC Methods

Fengxiang Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Model Predictive Torque Control of Induction Motor Drives With Optimal Duty Cycle Control

Yongchang Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2014)

添加到收藏夹

Review Computer Science, Information Systems

A Vision of IoT: Applications, Challenges, and Opportunities With China Perspective

Shanzhi Chen et al.

IEEE INTERNET OF THINGS JOURNAL (2014)

添加到收藏夹

Article Automation & Control Systems

Predictive Torque and Flux Control Without Weighting Factors

Christian A. Rojas et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)

添加到收藏夹

Article Automation & Control Systems

High-Performance Control Strategies for Electrical Drives: An Experimental Assessment

Jose Rodriguez et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Improved FCS-MPC Algorithm for an Induction Motor With an Imposed Optimized Weighting Factor

S. Alireza Davari et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.