4.6 Article

A five-peaks graphene absorber with multiple adjustable and high sensitivity in the far infrared band

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Optics

Ultra long infrared metamaterial absorber with high absorption and broad band based on nano cross surrounding

Shiri Liang et al.

Summary: This study achieves wideband absorption in the long wavelength infrared range using a metamaterial absorber based on nanowire cross surrounding. The absorber has polarization independence and high absorptivity in the LWIR band, which can be adjusted by changing the geometric parameters. It is suitable for infrared imaging, thermoelectronic devices, and thermal detection applications.

OPTICS AND LASER TECHNOLOGY (2023)

Article Chemistry, Physical

Polarization-sensitive multi-frequency switches and high-performance slow light based on quadruple plasmon-induced transparency in a patterned graphene-based terahertz metamaterial

Yuhui Li et al.

Summary: A periodic patterned graphene-based terahertz metamaterial with three transverse graphene strips and one longitudinal continuous graphene ribbon is proposed to achieve a dynamically tunable quadruple plasmon-induced transparence (PIT) effect. The magnetic field distribution along the x-direction leads to the destructive interference between the bright mode and the dark mode, resulting in the quadruple-PIT window. The numerical and theoretical analysis shows that the spectral response characteristics obtained by FDTD simulation and CMT calculation match well.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Article Chemistry, Physical

High confidence plasmonic sensor based on photonic crystal fibers with a U-shaped detection channel

Wanlai Zhu et al.

Summary: To improve optical fiber sensing performance and broaden its application, a photonic crystal fiber (PCF) plasmonic sensor with a U-shaped channel based on surface plasmon resonance (SPR) is proposed in this study. The influence rules of structural parameters, such as the radius of the air hole, the thickness of the gold film, and the number of U-shaped channels, were investigated using COMSOL and the finite element method. The dispersion curves, loss spectrum, and electric field intensity distribution were studied under various conditions. The proposed sensor achieved a maximum refractive index sensitivity of 24.1 mu m RIU-1 in the RI range of 1.38-1.43, with a FWHM of 10.0 nm, a FOM of 2410 RIU-1, and a resolution of 4.15 x 10(-6) RIU. The sensor combines the highly sensitive SPR effect and allows for real-time detection of the external environment. The detection range and sensitivity can be increased by adjusting the structural parameters. The sensor has a simple structure and excellent performance, providing a new approach for real-time detection and highly integrated sensing.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Article Physics, Multidisciplinary

Active tunable terahertz bandwidth absorber based on single layer graphene

Wenxin Li et al.

Summary: In this paper, an active tunable terahertz bandwidth absorber based on single-layer graphene is proposed. It shows high absorption and excellent physical regulation in the range of 3.7 THz-8 THz when the Fermi energy (E-f) of graphene is 1.5 eV. The absorber exhibits superior tunability by adjusting physical parameters and E-f, and it is also polarization independent and insensitive to the incident angle.

COMMUNICATIONS IN THEORETICAL PHYSICS (2023)

Article Materials Science, Multidisciplinary

Multimode tunable terahertz absorber based on a quarter graphene disk structure

Zhibin Ye et al.

Summary: In this research, a simple tunable absorber based on graphene with tunable Fermi level was designed to solve the unadjustability of traditional noble metal absorbers in meeting complex application requirements in the actual electromagnetic environment. The performance of the absorber was theoretically simulated using the finite difference time domain (FDTD) method. The proposed absorber exhibited two perfect absorption peaks with high efficiency in its working band (90-155 μm). The absorber's absorption frequency can be adjusted through controlling the relaxation time and Fermi level of graphene or changing the refractive index of the medium. The proposed absorber has the potential to adapt to different electromagnetic environments and can be flexibly regulated in practical applications, opening up new possibilities for various fields such as detection and communication.

RESULTS IN PHYSICS (2023)

Article Materials Science, Multidisciplinary

High Absorptivity and Ultra-Wideband Solar Absorber Based on Ti-Al2O3 Cross Elliptical Disk Arrays

Yuanjian Zhang et al.

Summary: In this paper, we propose and optimize an ultra-wideband solar absorber based on Ti-Al2O3 cross elliptical disk arrays, which has the characteristics of ultra-wideband absorption of solar energy and insensitivity to polarization and incident angles. The absorption spectrum and field distribution are analyzed, and the results demonstrate that the absorption bandwidth with the absorption rate beyond 90% reaches 1380 nm (385-1765 nm), and the average absorption reaches an astonishing 98.78%. The proposed ultra-wideband solar absorber is insensitive to the polarization angle and oblique incidence angle, and has research and application value in solar energy harvesting, photothermal conversion, and utilization.

COATINGS (2023)

Article Engineering, Environmental

Mixed-valence cobalt oxides bifunctional electrocatalyst with rich oxygen vacancies for aqueous metal-air batteries

Xiangsi Wu et al.

Summary: This study presents a method to prepare mixed-valence cobalt oxide with regulatable ratio by introducing air at a certain temperature. The resulting nanosphere-shaped material shows multiple heterointerfaces and rich oxygen vacancies, exhibiting exceptional oxygen reduction reaction and oxygen evolution reaction activity. This material also performs well in zinc-air batteries and magnesium-air batteries, with excellent electrochemical performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

The intercalation cathode of MOFs-driven vanadium-based composite embedded in N-doped carbon for aqueous zinc ion batteries

Xiuting Wu et al.

Summary: This study demonstrates a novel cathode material, ZnVO-800, derived from zeolitic imidazolate framework-8 (ZIF-8) by a self-sacrificed route. The ZnVO-800 cathode exhibits outstanding electrochemical performance, with high reversible capacity and excellent cycleability in aqueous zinc ion batteries. The electrochemical mechanism involves the transformation of ZnVO-800 into ZnxV2O5·nH(2)O with high electrochemical activity through in-situ electrochemical activation process, and the heterojunction with hierarchical structure enhances the dynamics and long-term cycleability.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Tunable broadband absorber based on a layered resonant structure with a Dirac semimetal

Wenxin Li et al.

Summary: In this research, a tunable broadband absorber based on a layered resonant structure was designed, which achieved high absorption (more than 0.9) in the frequency range of 18-28 THz. The high absorption was attributed to strong resonance absorption between the layers and the resonance of the localised surface plasmon. The absorber, consisting of three layers of Dirac semimetal and three layers of optical crystal plates on a gold substrate, also showed tunability and absorption stability.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Article Physics, Applied

Quadruple plasmon-induced transparency and tunable multi-frequency switch in monolayer graphene terahertz metamaterial

Yuhui Li et al.

Summary: A monolayer graphene metamaterial has been proposed to generate quadruple plasmon-induced transparency (PIT) in the terahertz frequency range. The structure shows promising potential for tunable multi-frequency switches and excellent optical storage.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Article Chemistry, Physical

Strategy for boosting Co-Nx content for oxygen reduction reaction in aqueous metal-air batteries

Xiangsi Wu et al.

Summary: In this study, Co, N-dual doped carbon catalyst (Co/NNC) was successfully prepared using a combination approach of SiO2 template and extra nitrogen source. The catalyst exhibited excellent electrocatalytic performance in the oxygen reduction reaction and was employed in zinc-air and magnesium-air batteries, showing outstanding performance.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Realization of 18.97% theoretical efficiency of 0.9 μm thick c-Si/ZnO heterojunction ultrathin-film solar cells via surface plasmon resonance enhancement

Fei Zhao et al.

Summary: In this work, the performance of c-Si/ZnO heterojunction ultrathin-film solar cells is enhanced by an integrated structure of c-Si trapezoidal pyramids on the top and Al pyramids in the active layer. The top c-Si pyramid increases absorption of short wavelengths and the bottom Al pyramid improves overall optical absorption, resulting in a high absorption rate of 93.16%. The optimized current density and conversion efficiency of the solar cells are 41.94 mA cm(-2) and 18.97%, respectively. The solar cells show good absorption in a wide range of incident angles and the electric field intensity profile demonstrates excellent light-trapping performance.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Chemistry, Physical

A switchable terahertz device combining ultra-wideband absorption and ultra-wideband complete reflection

Zhipeng Zheng et al.

Summary: This study proposes a terahertz metamaterial absorber that combines metamaterial structures and a VO2 film. Flexible switching of absorption performance and an ultra-broadband perfect absorption with a bandwidth of 3.3 THz can be achieved through temperature adjustment. The study also highlights the wide thermal tuning range of spectral absorbance.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Materials Science, Multidisciplinary

A belfry-typed narrow-band tunable perfect absorber based on graphene and the application potential research

Qianyi Shangguan et al.

Summary: This research proposes a belfry-typed absorber sensor with a simple structure and high refractive index sensitivity and response speed. The absorber modes can be regulated by controlling the properties of graphene. The absorber has high application value in photoelectric detection, switching, and imaging.

DIAMOND AND RELATED MATERIALS (2022)

Article Electrochemistry

Highly efficient quantum-dot-sensitized solar cells with composite semiconductor of ZnO nanorod and oxide inverse opal in photoanode

Yuyu Liu et al.

Summary: This paper presents the fabrication of a novel photoanode based on a semiconductor composite and tests its performance in QDSSCs. The experimental results show that the new photoanode exhibits better charge transfer and reaction rates, as well as higher photocurrents and power conversion efficiencies. After interface modification, the cell efficiency is further improved.

ELECTROCHIMICA ACTA (2022)

Article Optics

Absorption-based ultra-sensitive RI sensor based on the flower-shaped graphene resonator for early detection of cancer

AmirHossein Norouzi Razani et al.

Summary: This study presents an ultra-sensitive sensor based on a flower-shaped graphene resonator, showing high absorption rate and frequency shift, making it suitable for biomedical sensing applications, particularly in early cancer detection.

OPTICS COMMUNICATIONS (2022)

Article Physics, Multidisciplinary

Multi-frequency switch and excellent slow light based on tunable triple plasmon-induced transparency in bilayer graphene metamaterial *

Xianwen Zhou et al.

Summary: This study proposes a novel bilayer graphene terahertz metamaterial for achieving a dynamically adjustable plasma-induced transparency effect. By adjusting the Fermi levels of graphene, excellent performance in multi-frequency optical switching and slow-light effects has been achieved.

COMMUNICATIONS IN THEORETICAL PHYSICS (2022)

Article Optics

A reconfigurable narrow and wide band multi bias graphene based THz absorber

Ilghar Rezaei et al.

Summary: This study presents a three layers graphene-based THz absorber composed of multi-bias graphene ribbons. The structure is described using an equivalent circuit model and design methodology is developed via impedance matching concept. The proposed device shows both narrow multi band and wide band absorption over a frequency range from 0.1 THz to 5 THz.

OPTICS AND LASER TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

High sensitivity active adjustable graphene absorber for refractive index sensing applications

Qianyi Shangguan et al.

Summary: In this paper, a three-band active adjustable perfect absorber with multiple advantages, such as multi-band perfect absorption, active adjustability, and high refractive index sensitivity, is proposed. The absorber exhibits good and stable sensing performance and has specific applications in the medical field.

DIAMOND AND RELATED MATERIALS (2022)

Article Materials Science, Multidisciplinary

Recent and emerging applications of Graphene-based metamaterials in electromagnetics

Meisam Esfandiari et al.

Summary: This paper provides an operational perspective of advanced graphene-based electromagnetic devices, focusing on graphene-enabled antennas, absorbers, and sensors in the terahertz frequency range. It analyzes the strengths and limitations of various design methodologies.

MATERIALS & DESIGN (2022)

Article Engineering, Electrical & Electronic

Quad band metal-dielectric-metal perfect absorber to selective sensing application

Seyed Amin Khatami et al.

Summary: In this article, a quad-band perfect classical absorber in the terahertz band has been achieved. The proposed structure has four perfect absorption bands with an average absorption of 98.22% at frequencies of 1.36, 2.6, 3.68, and 4.36 THz. The absorption mechanism is explained using an equivalent circuit, and the increase in absorption percentage due to the loss of the middle layer is demonstrated. The absorber has potential applications in imaging, selective sensing, and photodetector fields.

OPTICAL AND QUANTUM ELECTRONICS (2022)

Article Chemistry, Analytical

Design of Ultra-Narrow Band Graphene Refractive Index Sensor

Qianyi Shangguan et al.

Summary: The paper proposes an ultra-narrow band graphene refractive index sensor with high absorption efficiency, adjustability, and sensitivity, which can be applied to photon detection in the terahertz band and biochemical sensing.

SENSORS (2022)

Article Chemistry, Physical

The intercalation cathode materials of heterostructure MnS/MnO with dual ions defect embedded in N-doped carbon fibers for aqueous zinc ion batteries

Fang Tang et al.

Summary: In this study, a MnS/MnO@N-CF composite was synthesized to improve the electrical conductivity and reaction kinetics of manganese-based materials for aqueous zinc ion batteries. The composite exhibited a high specific discharge capacity and superior cycleability, making it a promising cathode material for such batteries.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Inorganic & Nuclear

An investigation of the effects of ZnO inverse opal pore size in the composite of ZnO nanorods/ZnO inverse opal on the performance of quantum dot-sensitized solar cells

Zi Wang et al.

Summary: A semiconductor oxide composite consisting of ZnO nanorods and ZnO inverse opal was fabricated and used in the photoanode of QDSSCs. The study found that the pore size of the ZnO inverse opal in the composite greatly affects the performance of the QDSSCs.

DALTON TRANSACTIONS (2022)

Article Materials Science, Multidisciplinary

Graphene-based metamaterial absorber for refractive index sensing applications in terahertz band

Mohammad-Reza Nickpay et al.

Summary: In this paper, a tunable triple-band absorption-based refractive index (RI) sensor with a combined graphene pattern in the terahertz (THz) band is proposed. The sensor shows three narrow absorption peaks at specific frequencies due to the surface plasmon resonance (SPR) phenomenon of graphene. The performance and resonance frequencies can be adjusted by applying an external DC-bias voltage to the graphene.

DIAMOND AND RELATED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Tunable high-sensitivity sensing detector based on Bulk Dirac semimetal

Xingyu Wang et al.

Summary: This paper proposes a tunable sensing detector based on Bulk Dirac semimetals, which can realize frequency regulation and multi-frequency controllable sensing by adjusting the Fermi level of the semimetals. The detector exhibits high absorption rate, angular insensitivity, and high sensitivity, making it important for applications such as space detection and high-sensitivity biosensing detection.

RSC ADVANCES (2022)

Article Chemistry, Physical

Two-channel photonic crystal fiber based on surface plasmon resonance for magnetic field and temperature dual-parameter sensing

Dongying Wang et al.

Summary: In this paper, a dual-parameter sensor based on SPR-PCF is proposed for detecting magnetic field and temperature. The sensor has a unique structure and excellent sensing performance, which is important for simultaneous sensing of multiple basic physical parameters.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Chemistry, Physical

A stable fluoride-based interphase for a long cycle Zn metal anode in an aqueous zinc ion battery

Yuting Li et al.

Summary: This research developed a stable CaF2 protective layer to address the issues of dendritic growth and side reactions in zinc ion batteries. The CaF2 layer exhibited excellent performance, resulting in an ultra-long cycle life and high capacity retention in Zn ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Thermal tuning of terahertz metamaterial absorber properties based on VO2

Zhipeng Zheng et al.

Summary: A novel and structurally simple multifunctional broadband absorber is presented, using the thermogenic phase change properties of vanadium dioxide material to flexibly adjust absorption intensity and achieve near-perfect absorption in an ultra-broadband range.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Chemistry, Multidisciplinary

Multi-mode surface plasmon resonance absorber based on dart-type single-layer graphene

Hao Chen et al.

Summary: This paper proposes a multi-mode surface plasmon resonance absorber based on dart-type single-layer graphene, which has the advantages of polarization independence, tunability, high sensitivity, and high figure of merit. The absorption effect and resonant wavelength can be dynamically tuned by adjusting the numerical values of the single-layer graphene array's structure and chemical potential.

RSC ADVANCES (2022)

Article Multidisciplinary Sciences

Graphene-based THz absorber: adjustability via multiple gate biasing

Sindokht Cyrus et al.

Summary: A multi-layer absorber using multi-bias arrays of graphene is proposed, achieving wide-band and multiband absorption through an optimization process. The device shows high absorption performance and acceptable sensitivity, with response dependency to various parameters analyzed. Such reconfigurable absorber is in demand for applications such as medical imaging and indoor communication.

HELIYON (2021)

Article Optics

Graphene-based multi-layers THz absorber: Circuit model representation

Iman Chaharmahali et al.

Summary: A unique THz wave absorber is presented in this study, utilizing both concept and method, with three layers including dielectric and graphene patterns for zero wave transmission. The structure incorporates dual bias scheme for periodic arrays of graphene ribbons and disks, while modeled as passive circuit elements for exclusive impedance calculation. Through impedance matching theory, perfect dual-band absorption at 5.5THz and 8.5THz frequencies is achieved by tuning structure parameters. Ample simulations confirm the robustness of the structure and the capability of tuning absorption peaks through chemical potentials variation.
Article Energy & Fuels

Enhanced performance of Li-S battery by constructing inner conductive network and outer adsorption layer sulfur-carbon composite

Ling Zhu et al.

Summary: The study focuses on enhancing the performance of lithium-sulfur batteries using acetylene black/sulfur composites and in-situ polymerization of polypyrrole, leading to excellent cycle stability and rate adaptability through advantages such as providing abundant micropores, a 3D conductive matrix, and promoting ion migration.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Nanoscience & Nanotechnology

Quad-band polarization-insensitive metamaterial perfect absorber based on bilayer graphene metasurface

Pouria Zamzam et al.

Summary: This paper presents a quad-band, polarization-insensitive metamaterial perfect absorber based on bi-layer graphene. By stacking the double layer graphene metasurface, a quad-band perfect absorber with an average absorption of 99.43% at four different frequencies is achieved. The proposed structure has advantages of tunable resonant frequency, polarization insensitivity, and tolerance to incident angles, showing potential in filtering, detection, imaging, and photodetector applications.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2021)

Article Materials Science, Multidisciplinary

Multi-bias graphene-based THz super absorber

Masoud Soltani-Zanjani et al.

Summary: The paper presents a comprehensive design methodology for graphene-based multi-layers structures, utilizing multiple bias schemes and different graphene patterns to enhance adjustability and complexity of the device. Optimization is conducted using a weighted binary matrix, leading to a more in-depth control over device behavior. Validation is performed through circuit model formulations and Finite Element Method simulations for a unique three layers device.

RESULTS IN PHYSICS (2021)

Article Physics, Condensed Matter

Dual-band ultrasensitive terahertz sensor based on tunable graphene metamaterial absorber

Tao Chen et al.

Summary: This paper proposes a dual-band tunable absorber with a graphene-dielectric-metal structure as a sensor in the terahertz region, which achieves resonance frequency adjustment by tuning the chemical potential of graphene and exhibits polarization and angle insensitivity. Simulation results demonstrate the structure's maximum sensitivity, Q factor, and figure-of-merit, indicating promising applications in biomedical diagnosis and environmental monitoring.

SUPERLATTICES AND MICROSTRUCTURES (2021)

Article Materials Science, Multidisciplinary

Tunable quad-band perfect metamaterial absorber on the basis of monolayer graphene pattern and its sensing application

Jinping Tian et al.

Summary: A classic three-layer metamaterial absorber is designed for quad-band perfect absorption, with four absorption bands occurring in the 3-11 THz frequency range. Tuning of absorption properties can be achieved by adjusting the Fermi level or relaxation time of graphene, and the absorber is independent of the polarization of the input electromagnetic wave.

RESULTS IN PHYSICS (2021)

Article Chemistry, Physical

A four-band and polarization-independent BDS-based tunable absorber with high refractive index sensitivity

Xianglong Wu et al.

Summary: The designed four-band terahertz absorber, utilizing Dirac semi-metallic metamaterial and microstructure design, achieves an absorption rate of over 93%, with more than 95% perfect absorption rate. The physical mechanism of the absorber is analyzed in detail using theories like localized surface plasmon resonance and impedance matching, showcasing excellent polarization insensitivity. This absorber has great potential in the fields of bio-chemical sensing and special environmental detection.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Article Chemistry, Multidisciplinary

Bipolar charge trapping for absorption enhancement in a graphene-based ultrathin dual-band terahertz biosensor

Gaurav Varshney et al.

Summary: The study focuses on enhancing the performance of terahertz absorbers by utilizing surface plasmons at the graphene dielectric interface, creating higher order surface plasmons through charge trapping mechanism, and providing dual-band resonance absorption with perfect absorption effects.

NANOSCALE ADVANCES (2021)

Article Chemistry, Physical

Ultra-wideband and wide-angle perfect solar energy absorber based on Ti nanorings surface plasmon resonance

Fengqi Zhou et al.

Summary: The study introduces an ultra-wideband solar energy absorber composed of Ti ring and SiO2-Si3N4-Ti thin films, with absorption efficiency exceeding 90% and high absorptivity peaks. It maintains absorption efficiency above 90% at various polarization and incidence angles, showing great potential for wide-ranging applications.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Article Engineering, Electrical & Electronic

A graphene-based dual-band THz absorber design exploiting the impedance-matching concept

Sadegh Biabanifard

Summary: The THz wave absorber is designed with a unique concept and method to ensure zero transmission of THz waves through the structure. It incorporates multiple layers and arrays of graphene patterns, modeling them with a circuit model approach for precise impedance calculation and device behavior prediction. By tuning the structural parameters using impedance-matching theory, perfect dual-band absorption is achieved at frequencies of 5.5 and 8.5 THz with the ability to robustly tune absorption peaks.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2021)

Article Engineering, Chemical

Synthesis and electrochemical performance of Li1+xTi2-xFex(PO4)3/C anode for aqueous lithium ion battery

Weiwen Meng et al.

ADVANCED POWDER TECHNOLOGY (2020)

Article Engineering, Environmental

Spatially homogeneous copper foam as surface dendrite-free host for zinc metal anode

Canpeng Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Electrical & Electronic

A configurable two-layer four-bias graphene-based THz absorber

Mohamadreza Soltani et al.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2020)

Article Optics

A reconfigurable multi-band, multi-bias THz absorber

Masoud Soltani Zanjani et al.

Article Optics

Multi-bias, graphene-based reconfigurable THz absorber/reflector

Kamran Jafari Jozani et al.

Article Engineering, Electrical & Electronic

Highly Sensitive Terahertz Metamaterial Sensor

A. Samy Saadeldin et al.

IEEE SENSORS JOURNAL (2019)

Article Optics

Tunable ultra-wideband terahertz absorber based on graphene disks and ribbons

Sadegh Biabanifard et al.

OPTICS COMMUNICATIONS (2018)

Article Optics

Graphene metamaterial for multiband and broadband terahertz absorber

Runmei Gao et al.

OPTICS COMMUNICATIONS (2015)

Article Optics

A perfect absorber made of a graphene micro-ribbon metamaterial

Rasoul Alaee et al.

OPTICS EXPRESS (2012)

Article Chemistry, Multidisciplinary

Magnetoinductive and Electroinductive Coupling in Plasmonic Metamaterial Molecules

Na Liu et al.

ADVANCED MATERIALS (2008)

Article Physics, Multidisciplinary

Perfect metamaterial absorber

N. I. Landy et al.

PHYSICAL REVIEW LETTERS (2008)

Article Multidisciplinary Sciences

Fine structure constant defines visual transparency of graphene

R. R. Nair et al.

SCIENCE (2008)