相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Study of KCl-induced hot corrosion behavior of high velocity oxy-fuel sprayed NiCrAlY and NiCrBSi coatings deposited on 12CrMoV boiler steel at 700?C
Xia Liu et al.
CORROSION SCIENCE (2022)
Alleviation of thermal corrosion caused by molten ash on heat-exchange tubes in MSW incinerators: Effects of
Xiuju Zhang et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)
Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-xMox high-entropy alloys
Wenrui Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The fate of chlorine during MSW incineration: Vaporization, transformation, deposition, corrosion and remedies
Wenchao Ma et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)
Application of Coatings to Alleviate Fireside Corrosion on Heat Transfer Tubes during the Combustion of Low-Grade Solid Fuels: A Review
Xiuju Zhang et al.
ENERGY & FUELS (2020)
Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part I: NaCl-KC1 binary system
B. Gregoire et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Microstructure and corrosion resistance of ERNiCrMo-13 and NiCrBSi coatings in simulated coal-fired boiler conditions: The effect of fly-ash composition
C. Fu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Overview of public-private partnerships in the waste-to-energy incineration industry in China: Status, opportunities, and challenges
Caiyun Cui et al.
ENERGY STRATEGY REVIEWS (2020)
Microstructure, wear and corrosion behaviors of plasma sprayed NiCrBSi-Zr coating
Jin-Kun Xiao et al.
SURFACE & COATINGS TECHNOLOGY (2019)
High-temperature corrosion performance of HVAF-sprayed NiCr, NiAl, and NiCrAlY coatings with alkali sulfate/chloride exposed to ambient air
Reza Jafari et al.
CORROSION SCIENCE (2019)
Effects of Cr and Mo on precipitation behavior and associated intergranular corrosion susceptibility of superaustenitic stainless steel S32654
Shucai Zhang et al.
MATERIALS CHARACTERIZATION (2019)
Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 degrees C
Mingwen Bai et al.
CORROSION SCIENCE (2018)
Effect of Mo addition on corrosion of Zn coatings electrodeposited on steel
Honorata Kazimierczak et al.
CORROSION SCIENCE (2018)
Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings
Esmaeil Sadeghimeresht et al.
CORROSION SCIENCE (2018)
Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings
Esmaeil Sadeghimeresht et al.
MATERIALS & DESIGN (2018)
Effects of alloying elements on the corrosion behavior of Ni-based alloys in molten NaCl-KCl-MgCl(2 )salt at different temperatures
Hua Sun et al.
CORROSION SCIENCE (2018)
PESTEL analysis of the development of the waste-to-energy incineration industry in China
Jinbo Song et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions
Jia-Wei Lu et al.
WASTE MANAGEMENT (2017)
An Overview on Corrosion-Resistant Coating Technologies in Biomass/Waste-to-Energy Plants in Recent Decades
Yuuzou Kawahara
COATINGS (2016)
Refractory metals and nickel in high temperature chlorine-containing environments - thermodynamic prediction of volatile corrosion products and surface reaction mechanisms: a review
M. C. Galetz et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture
T. Varis et al.
SURFACE & COATINGS TECHNOLOGY (2015)
A review of technologies and performances of thermal treatment systems for energy recovery from waste
Lidia Lombardi et al.
WASTE MANAGEMENT (2015)
A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts
Shunv Liu et al.
CORROSION SCIENCE (2014)
Nickel-based HVOF coatings promoting high temperature corrosion resistance of biomass-fired power plant boilers
Maria Oksa et al.
FUEL PROCESSING TECHNOLOGY (2014)
Corrosion in biomass combustion: A materials selection analysis and its interaction with corrosion mechanisms and mitigation strategies
Renato Altobelli Antunes et al.
CORROSION SCIENCE (2013)
Corrosion of superheater materials in a waste-to-energy plant
Peter Viklund et al.
FUEL PROCESSING TECHNOLOGY (2013)
Corrosion Testing of Ni Alloy HVOF Coatings in High Temperature Environments for Biomass Applications
S. Paul et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Increased Lifetime for Biomass and Waste to Energy Power Plant Boilers with HVOF Coatings: High Temperature Corrosion Testing Under Chlorine-Containing Molten Salt
Maria Oksa et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
In situ corrosion testing of various nickel alloys at Mabjerg waste incineration plant
M. Montgomery et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2013)
Erosion-corrosion performance of NiCrAlY coating produced by plasma spray process in a coal-fired thermal power plant
S. B. Mishra et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Advanced Coating Technologies for Aggressive Corrosion Environments in WTE and Power Plants
Yuuzou Kawahara et al.
HIGH-TEMPERATURE OXIDATION AND CORROSION 2010 (2011)
The effect of Mo content in plasma-sprayed Mo-NiCrBSi coating on the tribological behavior
P. Niranatlumpong et al.
SURFACE & COATINGS TECHNOLOGY (2010)
A survey of the literature on the use of high velocity oxy-fuel spray technology for high temperature corrosion and erosion-corrosion resistant coatings
Manpreet Kaur et al.
ANTI-CORROSION METHODS AND MATERIALS (2008)
High temperature corrosion in a 65 MW waste to energy plant
Kristoffer Persson et al.
FUEL PROCESSING TECHNOLOGY (2007)
Influence of oxygen partial pressure in sintering atmosphere on properties of Cr-Mo prealloyed powder metallurgy steel
O. Bergman
POWDER METALLURGY (2007)
Corrosion behaviours of several thermal spray coatings used on boiler tubes at elevated temperatures
D. Rezakhani
ANTI-CORROSION METHODS AND MATERIALS (2007)
Hot corrosion studies of HVOFNiCrBSi and Stellite-6 coatings on a Ni-based superalloy in an actual industrial environment of a coal fired boiler
T. S. Sidhu et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Corrosion behaviour of NiCrBSi plasma-sprayed coatings partially melted with laser
C. Navas et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Hot corrosion behaviour of HVOF-sprayed NiCrBSi coatings on Ni- and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 °C
TS Sidhu et al.
ACTA MATERIALIA (2006)
Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications
T. S. Sidhu et al.
MATERIALS SCIENCE (2005)
High Velocity Oxy-Fuel spraying
J Koutsky
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
High temperature corrosion of coatings and boiler steels below chlorine-containing salt deposits
MA Uusitalo et al.
CORROSION SCIENCE (2004)
The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres -: Part I:: Literature evaluation and thermodynamic calculations on phase stabilities
R Bender et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2003)