☆ 4.7 Article

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

COMPOSITES PART B-ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting

Muhammad Waqas et al.

Summary: This paper discusses the research findings on the selective laser melting technology for manufacturing Ti6Al4V titanium alloy samples. The study found that increasing laser power can reduce sample defects, and the appropriate line spacing can improve the relative density. Through heat treatment, the mechanical properties of Ti6Al4V alloy samples can be significantly enhanced.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and Mechanical Properties of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Under Nitrogen and Argon Atmosphere

Yunmian Xiao et al.

Summary: The forming performance of AlSi10Mg under nitrogen atmosphere is better than that under argon, and in situ laser remelting can effectively enhance its densification and mechanical properties. The research results offer a new approach for regulating the properties of AlSi10Mg fabricated by LPBF according to specific requirements.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Multi-material additive manufacturing of a bio-inspired layered ceramic/metal structure: Formation mechanisms and mechanical properties

Rui Wang et al.

Summary: This research reveals the mechanisms of material densification, element diffusion, interfacial reaction, crystal growth, and performance enhancement in multi-material laser powder bed fusion (LPBF) through experiments and simulations. Fully dense multi-material parts with strong metallurgical bonding and gradually changing microhardness at the interface were achieved by optimizing the printing parameters. The laser printed TiB2/Ti6Al4V multi-material parts exhibited excellent flexural performance with improved strength and ductility. This study is significant for the manufacturing and strengthening of ceramic/metal multi-material using laser additive manufacturing technology.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

添加到收藏夹

Article Chemistry, Physical

Effects of Annealing and Solution Treatments on the Microstructure and Mechanical Properties of Ti6Al4V Manufactured by Selective Laser Melting

Hassanen Jaber et al.

Summary: This research investigated the effect of heat treatment parameters on the microstructure and mechanical properties of SLM Ti64 structure. It was found that heat treatment can improve the tensile strength and ductility of SLM-manufactured Ti64 alloys. The optimal combination of ductility and tensile strength was achieved through heat treatment at 850 degrees C followed by furnace cooling.

MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Heterostructured alloys with enhanced strength-ductility synergy through laser-cladding

Rae Eon Kim et al.

Summary: In this study, a simple process of laser-cladding was proposed to develop heterostructured alloys, which showed enhanced strength and ductility compared to traditional alloys. The hetero-deformation-induced strengthening resulted in an improved strength-ductility synergy.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced strength-ductility synergy in laser additive manufactured TC4 titanium alloy by grain refinement

Xiaotong Pang et al.

Summary: The addition of ZrB2 through laser melting deposition can refine the prior-beta grains in the TC4 titanium alloy, resulting in a fine basket-weave structure. The mechanical anisotropy of the modified-TC4 alloys decreases with the increase of ZrB2 content. The alloy with 0.5 wt% ZrB2 addition shows an excellent combination of strength and ductility, with isotropic characteristics.

MATERIALS LETTERS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A short review on mechanical properties of SLM titanium alloys based on recent research works

N. Rahulan et al.

Summary: This paper reviews the mechanical properties of Titanium based alloys prepared by Selective Laser Melting (SLM), and discusses the effects of process parameters on these properties. It also examines the enhancements in properties achieved, such as tensile strength, yield strength, ductility, and hardness. Additionally, a study on the post heat treatment of SLM Ti alloys is conducted.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Deformation strengthening mechanism of in situ TiC/TC4 alloy nanocomposites produced by selective laser melting

Pengcheng Huo et al.

Summary: In this study, TiC/TC4 alloy nanocomposites were successfully fabricated using the selective laser melting (SLM) process, and the deformation strengthening mechanism of Ti matrix reinforced with TiC nanoparticles was investigated in depth. The results showed that nanoscale TiC reinforcement promoted the formation of deformation twinning, maintaining an orderly arrangement of atoms in the TiC/TC4 alloy nanocomposites during deformation. Additionally, a dual strengthening mechanism involving severe lattice distortion and deformation twinning was proposed to describe the occurrence of dislocation pinning effects.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure evolution and mechanical properties of in-situ Ti6Al4V-TiB composites manufactured by selective laser melting

Zhiguang Zhou et al.

Summary: In situ TiB reinforced titanium matrix composites were fabricated via selective laser melting, with optimized processing to achieve crack-free and fully dense composites. The distribution of TiB reinforcement in the composites was mainly in the form of whisker clusters, showing different distributions in TMC1 and TMC2. The improvement in mechanical properties of the composites was attributed to Hall-Petch strengthening and load-bearing transformation strengthening.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective laser melting of Ti6Al4V: Effect of laser re-melting

J. Karimi et al.

Summary: This study investigated the effect of remelting on the microstructure and mechanical properties of Ti6Al4V materials fabricated using selective laser melting. The results showed that the number of remeltings significantly influenced the homogenization of the microstructure and mechanical properties of the materials, with an increase in hardness and ultimate tensile strength but a decrease in ductility observed with a higher number of melting steps.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural evolution, mechanical and tribological properties of TiC/ Ti6Al4V composites with unique microstructure prepared by SLM

Mingkai Tang et al.

Summary: TiC/Ti6Al4V composites processed by selective laser melting exhibit high relative density, unique nanostructures, enhanced hardness and tensile strength, as well as excellent tribological properties. The unique nanoscale lamellar and needle-like eutectic TiC reinforcement phases contribute to the improvement in mechanical and tribological properties of the composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ laser additive manufacturing of Ti6Al4V matrix composites by gas-liquid reaction in dilute nitrogen gas atmospheres

Wenhou Wei et al.

Summary: A novel method for laser additive manufacturing of in-situ synthesized TiN and AlN co-reinforced Ti6Al4V matrix composites in low-concentration N-2 atmospheres is developed in this study. The formation of the composites involves reactions between decomposed nitrogen, molten Ti6Al4V, and nitrides layer-by-layer. The resulting nanoscale reinforcements exhibit good dispersion and strong interfacial bonding, leading to significantly increased microhardness and compressive strength of the composites.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The microstructures and mechanical properties of martensite Ti and TiN phases in a Ti6Al4V laser-assisted nitriding layer

Penglin Zhang et al.

Summary: The research finds that the nano-hardness of the TiN phase is 2609 HV with an elastic modulus of 208 GPa, while the nano-hardness of alpha '-Ti is 632 HV with an elastic modulus of 142.8 GPa. The entanglement of two sets of parallel dislocations in alpha'-Ti crystals forms subgrain boundaries, exerting a positive influence on work hardening and fine-grain strengthening. During the TiN dendritic fracture process, a crack-toughening mechanism occurs with primary dendrites undergoing near ductile fracture along the growth direction of secondary dendrites.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Material-structure-performance integrated laser-metal additive manufacturing

Dongdong Gu et al.

Summary: The advancement of laser-metal additive manufacturing has enabled the printing of multimaterial/multifunctional designs to meet the increasing demand from industries such as aviation, aerospace, automobile manufacturing, and energy production. By integrating material-structure-performance, major improvements in performance and function can be achieved through the right materials printed in the right positions and unique structures printed for unique functions. This approach exemplifies the revolution of design and manufacturing strategies in additive manufacturing.

SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A constitutive model for 3D printed continuous fiber reinforced composite structures with variable fiber content

Zhanghao Hou et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Development of processing strategies for multigraded selective laser melting of Ti6Al4V and IN718

Marco Giuseppe Scaramuccia et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion

P. A. Morton et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Planting carbon nanotubes within Ti-6Al-4V to make high-quality composite powders for 3D printing high-performance Ti-6Al-4V matrix composites

Yu Liu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing

Wenhou Wei et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

New protocol for orientation reconstruction from martensite to austenite in steels

Cheng-Yao Huang et al.

MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interfacial characteristics and mechanical properties of TiAl/Ti6Al4V laminate composite (LMC) fabricated by vacuum hot pressing

Haifeng Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interfacial microstructure and mechanical. properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting

Jie Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Optics

Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy

Zhen Wang et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Build Orientation on Mechanical Properties and Microstructure of Ti-6Al-4V Manufactured by Selective Laser Melting

Shubin Ren et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting

Mingkang Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Engineering, Biomedical

Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process

Michaela Fousova et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Achieving grain refinement and enhanced mechanical properties in Ti-6Al-4V alloy produced by multidirectional isothermal forging

Z. X. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Fishnet model for failure probability tail of nacre-like imbricated lamellar materials

Wen Luo et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

添加到收藏夹

Article Engineering, Mechanical

Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density

Jie Han et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing

Umberto Scipioni Bertoli et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and mechanical properties of functionally graded TiCp/Ti6A14V composite fabricated by laser melting deposition

Liqun Li et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of metals

Dirk Herzog et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Engineering, Biomedical

Enhancement of local bone remodeling in osteoporotic rabbits by biomimic multilayered structures on Ti6Al4V implants

Ling Huang et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ nitrided titanium alloys: Microstructural evolution during solidification and wear

H. Mohseni et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Origin of dramatic oxygen solute strengthening effect in titanium

Qian Yu et al.

SCIENCE (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain partitioning in dual-phase steels containing tempered martensite

Qihang Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel

Kyosun Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Automatic grain size determination in microstructures using image processing

H. Peregrina-Barreto et al.

MEASUREMENT (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of β treatments on microstructures and mechanical properties of TC4-DT titanium alloy

Xiaona Peng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance

Dongdong Gu et al.

SURFACE & COATINGS TECHNOLOGY (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure, hardness and cavitation erosion behaviour of Ti-6Al-4V laser nitrided under different gas atmospheres

J. Kaspar et al.

SURFACE ENGINEERING (2007)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of laser gas nitriding on the microstructure and corrosion properties of Ti-6Al-4V alloy

Reza Shoja Razavi et al.

ISIJ INTERNATIONAL (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of ultra-fine grained and dispersion-strengthened titanium materials by spark plasma sintering

Dirk Handtrack et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium

MSF Lima et al.

SURFACE & COATINGS TECHNOLOGY (2005)

添加到收藏夹

Article Physics, Applied

Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation

YT Zhu et al.

JOURNAL OF APPLIED PHYSICS (2005)

添加到收藏夹

Article Physics, Applied

Surface kinetics and subplantation phenomena affecting the texture, morphology, stress, and growth evolution of titanium nitride films

P Patsalas et al.

JOURNAL OF APPLIED PHYSICS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.