☆ 4.7 Article

Magnetorheological behavior of thermoplastic elastomeric honeycomb structures fabricated by additive manufacturing

COMPOSITES PART B-ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Characterization & Testing

Effect of pre-strain on compression mode properties of magnetorheological elastomers

Hossein Vatandoost et al.

Summary: The study demonstrates the significant impact of pre-strain on the performance of magnetorheological elastomers, which is further influenced by various factors with a greater effect observed in isotropic MREs. Additionally, simple models were proposed to predict and design the performance of MREs in compression mode.

POLYMER TESTING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of shape factor on compression mode dynamic properties of magnetorheological elastomers

Hossein Vatandoost et al.

Summary: This study investigates the effects of shape factor (SF) on the compression mode properties of cylindrical isotropic and anisotropic MREs, finding that different SFs can significantly impact the performance of MREs and increasing SF can enhance the MR effect.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

添加到收藏夹

Article Instruments & Instrumentation

Magneto-induced Mullins effect of anisotropic MREs under compression mode

Ruyi Gan et al.

Summary: This study investigated the factors affecting the magneto-induced Mullins effect and identified the conditions under which materials exhibit optimal performance in terms of this effect and stability. Additionally, a model was successfully established to explain the experimental phenomena from the perspective of strain energy.

SMART MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of iron particles' volume fraction on compression mode properties of magnetorheological elastomers

Hossein Vatandoost et al.

Summary: The experimental study investigated the effect of iron particle volume fraction (PVF) on the dynamic compression mode properties of isotropic and anisotropic magnetorheological elastomers (MREs). The results showed that PVF had a significant impact on the loss modulus of MREs, with a higher effect on the isotropic MREs compared to anisotropic MREs. The research also highlighted the strong dependence of MR effect on loading conditions, in addition to PVF.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Analysis of Styrene-Butadiene Based Thermoplastic Magnetorheological Elastomers with Surface-Treated Iron Particles

Arturo Tagliabue et al.

Summary: Magnetorheological elastomers (MRE) have the ability to change stiffness by applying a magnetic field. Thermoplastic elastomers (TPE) have been investigated as matrix material, while different surface treatments of carbonyl iron particles (CIPs) as filler affect the performance. The MR effect under static and dynamic load shows significant results.

POLYMERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Microstructural behavior of magnetorheological elastomer undergoing durability evaluation by stress relaxation

Mohd Aidy Faizal Johari et al.

Summary: The study focuses on the microstructural durability behavior of magnetorheological elastomer (MRE) materials by evaluating stress relaxation through torsional shear load. It identifies the novel micro-mechanisms responsible for the depleted performance of MRE and discusses the correlation between microstructural phenomena and the viscoelastic properties of MRE under stress relaxation. The study reveals a systematic correlation between microstructural deformation and durability performance of MRE, highlighting the potential for further research in this area.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Strength and stiffness characteristics of A3003 aluminum honeycomb core sandwich panels

S. Rajkumar

Summary: The demand for lightweight sandwich panels in various industrial sectors is increasing, with research focusing on weight and cost reduction. Sandwich panels, consisting of thin face sheets and lightweight cores, are used in public transport, aerospace, construction, machinery, and printing industries. The heterogeneous nature of honeycomb cores and complex load transfer paths make stiffness prediction difficult. Various types of sandwich panels are commercially available with different core materials and structures.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic characterization of isotropic and anisotropic magnetorheological elastomers in the oscillatory squeeze mode superimposed on large static pre-strain

Hossein Vatandoost et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Composite magnetorheological elastomers for tactile displays: Enhanced MR-effect through bi-layer composition

Ali Alkhalaf et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Line-patterned hybrid magnetorheological elastomer developed by 3D printing

A. K. Bastola et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effects of magnetic particles and carbon black on structure and properties of magnetorheological elastomers

Engin Burgaz et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A review on magneto-mechanical characterizations of magnetorheological elastomers

Anil K. Bastola et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Composites

The energy-absorbing characteristics of carbon fiber-reinforced epoxy honeycomb structures

R. A. Alia et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Robotics

A Fully Three-Dimensional Printed Inchworm-Inspired Soft Robot with Magnetic Actuation

Erina B. Joyee et al.

SOFT ROBOTICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring

J. Jefferson Andrew et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on mechanical properties of a novel polyurethane sponge magnetorheological elastomers in compressive mode

Dan Zhao et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing of Magnetoresponsive Polymeric Materials with Tunable Mechanical and Magnetic Properties by Digital Light Processing

Simone Lantean et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Polymer Science

Investigation of the Effect of Carbonyl Iron Micro-Particles on the Mechanical and Rheological Properties of Isotropic and Anisotropic MREs: Constitutive Magneto-Mechanical Material Model

Cintya G. Soria-Hernandez et al.

POLYMERS (2019)

添加到收藏夹

Article Instruments & Instrumentation

Temperature effect on viscoelastic properties of anisotropic magnetorheological elastomers under compression

Yanxiang Wan et al.

SMART MATERIALS AND STRUCTURES (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Investigation on the Mechanical Properties of MRE Compounds

Renato Brancati et al.

MACHINES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D magnetic printing of bio-inspired composites with tunable mechanical properties

Luquan Ren et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Development of hybrid magnetorheological elastomers by 3D printing

A. K. Bastola et al.

POLYMER (2018)

添加到收藏夹

Article Chemistry, Physical

A 3D-Printable Polymer-Metal Soft-Magnetic Functional CompositeDevelopment and Characterization

Bilal Khatri et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printed hierarchical honeycombs with shape integrity under large compressive deformations

Yanyu Chen et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Mechanical

High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations

Guangyong Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Printing ferromagnetic domains for untethered fast-transforming soft materials

Yoonho Kim et al.

NATURE (2018)

添加到收藏夹

Article Polymer Science

Limitations of Viscoelastic Constitutive Models for Carbon-Black Reinforced Rubber in Medium Dynamic Strains and Medium Strain Rates

Francesca Carleo et al.

POLYMERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printed magnetic polymer composite transformers

Lindsey M. Bollig et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator

Zhongying Ji et al.

ADVANCED MATERIALS INTERFACES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel hybrid magnetorheological elastomer developed by 3D printing

A. K. Bastola et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Mechanics

Bending behavior of sandwich composite structures with tunable 3D-printed core materials

Tiantian Li et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Materials Science, Characterization & Testing

Large-strain behaviour of Magneto-Rheological Elastomers tested under uniaxial compression and tension, and pure shear deformations

Gerlind Schubert et al.

POLYMER TESTING (2015)

添加到收藏夹

Article Engineering, Mechanical

Viscoelastic Responses of Silicone-Rubber-Based Magnetorheological Elastomers Under Compressive and Shear Loadings

Rui Li et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties of magnetorheological elastomers under shear deformation

Anna Boczkowska et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compression and thermal conductivity characteristics of magnetorheological fluid-spacer fabric smart structures

Suleyman I. Mistik et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Behavior of thick magnetorheological elastomers

Faramarz Gordaninejad et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2012)

添加到收藏夹

Article Instruments & Instrumentation

The pressure-dependent MR effect of magnetorheological elastomers

Xufeng Dong et al.

SMART MATERIALS AND STRUCTURES (2012)

添加到收藏夹

Article Instruments & Instrumentation

Magnetomechanical properties of anisotropic and isotropic magnetorheological composites with thermoplastic elastomer matrices

Jerzy Kaleta et al.

SMART MATERIALS & STRUCTURES (2011)

添加到收藏夹

Article Instruments & Instrumentation

Isotropic magnetorheological elastomers with thermoplastic matrices: structure, damping properties and testing

Piotr Zajac et al.

SMART MATERIALS & STRUCTURES (2010)

添加到收藏夹

Article Mechanics

Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model

S. Cantournet et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

添加到收藏夹

Article Physics, Atomic, Molecular & Chemical

Damping of Magnetorheological Elastomers

Lin Chen et al.

CHINESE JOURNAL OF CHEMICAL PHYSICS (2008)

添加到收藏夹

Article Physics, Applied

Viscoelastic properties of silicone-based magnetorheological elastomers

Holger Boese

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2007)

添加到收藏夹

Article Instruments & Instrumentation

Microstructure-property relationships of urethane magnetorheological elastomers

Anna Boczkowska et al.

SMART MATERIALS AND STRUCTURES (2007)

添加到收藏夹

Article Instruments & Instrumentation

Dynamic compression testing of a tunable spring element consisting of a magnetorheological elastomer

M. Kallio et al.

SMART MATERIALS AND STRUCTURES (2007)

添加到收藏夹

Article Materials Science, Composites

Magnetoactive polymer composite fibers and fabrics - Processing and mechanical characterization

Mehdi Farshad et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2007)

添加到收藏夹

Article Polymer Science

Oxidation of natural rubber-based magnetorheological elastomers

M Lokander et al.

POLYMER DEGRADATION AND STABILITY (2004)

添加到收藏夹

Article Automation & Control Systems

MR fluid, foam and elastomer devices

JD Carlson et al.

MECHATRONICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.