☆ 4.7 Article

Dual-scale parametric modeling and optimal design method of CFRP automotive roof beam

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A discrete material optimization method with a patch strategy based on stiffness matrix interpolation

Pengwen Sun et al.

Summary: A discrete material optimization method based on the stiffness matrix interpolation is proposed, with a comprehensive technical process developed using existing finite element software. By using the stiffness matrix instead of the constitutive matrix, the optimization process can be easily integrated with the software. The method has been verified to effectively improve the performance of composite materials.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Multiobjective optimization design of hybrid composite laminates for vibration using sequential permutation table method

Zhao Jing et al.

Summary: This work presents a sequential permutation table (SPT) method for the multiobjective optimization design of two-material hybrid composite laminates, which maximizes the fundamental frequency and minimizes the cost/weight. Through vibration analysis and ply orientation optimization, the SPT method demonstrates its effectiveness and efficiency in optimal design of hybrid composite laminates.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental analysis on mechanical properties of BF/PLA composites and its lightweight design on power battery box

Ying Zhao et al.

Summary: A novel composite battery box with BF/PLA composite is proposed to enhance stiffness and strength significantly, achieving a comprehensive weight reduction ratio of 40.88%. The optimized design is verified under various working conditions, highlighting the excellent reliability of the composite battery box compared to the traditional metal battery box.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Design and Manufacture of Automotive Hybrid Steel/Carbon Fiber Composite B-Pillar Component with High Crashworthiness

Dug-Joong Kim et al.

Summary: By utilizing design optimization and impact analysis, a composite B-pillar made of carbon-fiber-reinforced plastic (CFRP) was designed to improve impact performance and reduce weight compared to conventional steel B-pillars.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Stacking sequence optimization for maximum buckling load of simply supported orthotropic plates by enhanced permutation search algorithm

Zhao Jing et al.

Summary: The EPS algorithm decomposes the stacking sequence optimization into three phases, obtaining the optimal stacking sequence design through multiple-step searching and effectively controlling the bending-twisting coupling effects.

ENGINEERING OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

New blending constraints and a stack-recovery strategy for the multi-scale design of composite laminates

Marco Picchi Scardaoni et al.

Summary: This work proposes a new strategy for dealing with blending requirements in composite structures design, which is successfully implemented in the framework of the multi-scale two-level optimization strategy. By using the polar formalism, new analytical expressions of blending constraints are derived and blended stacking sequences are recovered. The results obtained using the MS2LOS based on the polar formalism outperform those reported in the literature.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Topology optimization of multiphase materials with dynamic and static characteristics by BESO method

Ning Gan et al.

Summary: This paper proposes a parallel topology optimization design method for dynamic and static characteristics of multiphase materials, which is effective, efficient and easy to implement.

ADVANCES IN ENGINEERING SOFTWARE (2021)

添加到收藏夹

Article Mechanics

Analysis and optimization for vibration of laminated rectangular plates with blended layers

Michio Innami et al.

Summary: An accurate and straightforward analytical method is proposed for the free vibration analysis of laminated composite rectangular plates with blended layers. The method is verified through numerical comparisons and tested in vibration optimization, showing that the introduction of blended layers is an effective approach to design the dynamic characteristics of laminated composite plates.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

A new method for simultaneous material and topology optimization of composite laminate structures using Hyperbolic Function Parametrization

Dzenan Hozic et al.

Summary: HFP introduces a novel way to parametrize candidate materials in optimization problems, using a filtering technique based on hyperbolic functions. Despite the additional non-linearity introduced, HFP has fewer optimization variables and constraints compared to DMTO and SFP, showing consistent performance in optimizing composite plates.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Rapid transformation of lamination parameters into stacking sequences

Moritz Sprengholz et al.

Summary: This paper presents a method for rapidly transforming lamination parameters into continuous stacking sequences, showing that multiple stacking sequences can share the same parameters, leading to the need for multiple layup solutions. By using primitive optimization techniques, the algorithm is able to find all stacking sequence solutions, making it applicable for stacking sequence retrieval in lamination parameter optimization.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

An efficient design methodology for graded surface-based lattice structures using free-size optimization and enhanced mapping method

Ugur Simsek et al.

Summary: This paper introduces a novel Free-size Optimization based Graded Lattice Generation method for generating functionally graded lattice structures and presents a reconstruction method suitable for Additive Manufacturing of 3D FGL structures. The effectiveness of the proposed algorithm is validated through laser vibrometer measurements, showing a reduction in overall acceleration spectrum compared to existing optimization algorithms. The study highlights the efficiency and validity of the FOGLG method for FGL generation.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Chemistry, Physical

Design of Center Pillar with Composite Reinforcements Using Hybrid Molding Method

Ji-Heon Kang et al.

Summary: This study aims to reduce vehicle weight by replacing existing steel reinforcements with composite reinforcements in an automobile center pillar to improve fuel efficiency. A hybrid molding method is proposed to reduce process time and production cost. Structural analyses confirmed that composite reinforcements can achieve weight reduction while maintaining the same or higher specific stiffness compared to steel reinforcements.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Machine learning based topology optimization of fiber orientation for variable stiffness composite structures

Yanan Xu et al.

Summary: This study introduces a machine learning approach for optimizing fiber orientations in variable stiffness CFRP structures, using neural networks to estimate objective functions and design variable sensitivities. By employing active learning and quasi-global search strategies, the ML-based method shows a 12.62% improvement in structural performance compared to conventional FEA-based methods, offering a new alternative for fiber-reinforced composite design.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Preliminary design of an injection-molded recycled-carbon fiber-reinforced plastic/metal hybrid automotive structure via combined optimization techniques

Joao Henrique Fonseca et al.

Summary: The study focuses on optimizing the design of a recycled-carbon fiber-reinforced plastic/metal hybrid engine cradle, achieving a 36% weight reduction while effectively balancing functionality and injection molding suitability. The results contribute to efficient multimaterial design in the automotive industry.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Mechanics

Effect of extension-twisting and extension-bending coupling on a compressed plate with a cut-out

Katarzyna Falkowicz et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Design considerations for variable stiffness, doubly curved composite plates

Matthew A. Thomas et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Diverse discrete material optimization for multi-patch laminates under vibration environment

Xiangtao Ma et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Polymer Science

Topology Optimization of Metal and Carbon Fiber Reinforced Plastic (CFRP) Laminated Battery-Hanging Structure

Jiaju Chen et al.

POLYMERS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimization of thickness and delamination growth in composite laminates under multi-axial fatigue loading using NSGA-II

Abbas Kamaloo et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Aeroelastic optimization of composite wings including fatigue loading requirements

D. Rajpal et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Construction & Building Technology

Simultaneous Shape and Stacking Sequence Optimization of Laminated Composite Free-Form Shells Using Multi-Island Genetic Algorithm

Bingbing San et al.

ADVANCES IN CIVIL ENGINEERING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Parametric modeling and multiobjective crashworthiness design optimization of a new front longitudinal beam

Libin Duan et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)

添加到收藏夹

Article Engineering, Mechanical

Multi-objective lightweight optimization and design for body-in-white frontal sub-module

Dengfeng Wang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An integrated optimization for laminate design and manufacturing of a CFRP wheel hub based on structural performance

Fei Lei et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Structure-material integrated multi-objective lightweight design of the front end structure of automobile body

Feng Xiong et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Discrete topology optimization of ply orientation for a carbon fiber reinforced plastic (CFRP) laminate vehicle door

Chi Wu et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Mechanics

Optimal design of laminated composite structures with ply drops using stacking sequence tables

F. -X. Irisarri et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Size Optimization of Stiffeners in Bending Plates

Adel Elsabbagh

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Article Engineering, Manufacturing

LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen

Paolo Feraboli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Full analytical sensitivities in NURBS based isogeometric shape optimization

Xiaoping Qian

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)

添加到收藏夹

Article Engineering, Aerospace

Unified Approach to the Characterization of Coupled Composite Laminates: Benchmark Configurations and Special Cases

C. B. York

JOURNAL OF AEROSPACE ENGINEERING (2010)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Combining grey relation and TOPSIS concepts for selecting an expatriate host country

MF Chen et al.

MATHEMATICAL AND COMPUTER MODELLING (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.