4.6 Article

Enhanced Performance of CsPbIBr2 Perovskite Solar Cell by Modified Zinc Oxide Nanorods Array with [6,6]-Phenyl C61 Butyric Acid

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Recent promise of lead-free halide perovskites in optoelectronic applications

Aili Wang et al.

Summary: Organic-inorganic halide perovskites have gained significant attention in emerging optoelectronic technologies due to their unique optical and electrical properties. However, the toxicity of lead halide perovskites is a major obstacle for their widespread application. Therefore, there is a high demand for developing lead-free (Pb-free) alternative perovskites with comparable performance and stability. This review provides a comprehensive summary of recent advances in Pb-free perovskites in various optoelectronic applications, including solar cells, photodetectors, light-emitting diodes, photocatalysis, and sensors. The challenges and future prospects for the development of Pb-free perovskite optoelectronics are also discussed, as they are essential for accelerating the commercial implementation of these emerging technologies.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Nanoscience & Nanotechnology

In-Depth Chemical and Optoelectronic Analysis of Triple-Cation Perovskite Thin Films by Combining XPS Profiling and PL Imaging

Stefania Cacovich et al.

Summary: The investigation combines XPS profiling and PL characterization to study the effects of Ar+ sputtering on the chemical composition and optoelectronic properties of perovskite layers. The results show that sputtering does not significantly impact the chemical and optoelectronic properties, validating the use of XPS profiling and PL characterization for studying multi-layered photovoltaic devices.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

Shan Tan et al.

Summary: The study demonstrates that phenyltrimethylammonium iodide (PTAI) and its corresponding low-dimensional perovskites exhibit excellent thermal stability and effectively suppress non-radiative recombination of CsPbI3, resulting in improved efficiency and stability of PSCs.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

Semi-Planar Non-Fullerene Molecules Enhance the Durability of Flexible Perovskite Solar Cells

Hairui Liu et al.

Summary: The introduction of Y6 as a buffer layer for SnO2-based flexible perovskite solar cells enhances charge extraction ability, bending stability, and reduces internal stress of perovskite films. It also improves interfacial charge extraction and reduces defect density.

ADVANCED SCIENCE (2022)

Article Chemistry, Multidisciplinary

Revealing Steric-Hindrance-Dependent Buried Interface Defect Passivation Mechanism in Efficient and Stable Perovskite Solar Cells with Mitigated Tensile Stress

Qian Zhou et al.

Summary: In this study, a novel and effective steric-hindrance-dependent buried interface defect passivation and stress release strategy is reported, which utilizes adamantane derivative molecules to modify the SnO2/perovskite interface. The experimental and theoretical results confirm the steric-hindrance-dependent defect passivation effect and interfacial chemical interaction strength. The device performance is enhanced by mitigating interfacial strain and passivating interfacial defects. The ADAA-modified device achieves an impressive efficiency of 23.18%.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Thermally Stable D2h Symmetric Donor-π-Donor Porphyrins as Hole-Transporting Materials for Perovskite Solar Cells

Chi-Lun Mai et al.

Summary: A new symmetric porphyrin MDA4 has been synthesized as a hole-transporting material for perovskite solar cells, showing impressive power-conversion efficiency and thermal stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Physical

Inverted planar heterojunction perovskite solar cells with high ultraviolet stability

Xueliang Zhu et al.

Summary: The study focuses on the UV-induced degradation of inverted perovskite solar cells and proposes a method to suppress it effectively by modifying the heterojunction with a self-assembled monolayer. The findings provide insights into the long-term stability of perovskite PVs and offer a potential solution to mitigate UV-ID issues.

NANO ENERGY (2022)

Article Materials Science, Multidisciplinary

Customizable solid-state batteries toward shape-conformal and structural power supplies

Lu Wei et al.

Summary: Customizable solid-state batteries, with their tailored shape, flexibility, functionality, and high safety, are essential for powering smart electronics and modern transportation systems. They have the potential to reduce device weight, extend lifespan, and even replace structural components in various applications through innovative material engineering and fabrication techniques.

MATERIALS TODAY (2022)

Article Chemistry, Applied

Surface passivation and hole extraction: Bifunctional interfacial engineering toward high-performance all-inorganic CsPbIBr2 perovskite solar cells with efficiency exceeding 12%

Qi Liu et al.

Summary: This study reports the use of an organic dye molecule as a bifunctional interlayer in CsPbIBr2 perovskite solar cells. The organic dye molecule effectively passivates trap states on the perovskite films and accelerates hole extraction. The treatment with the organic dye molecule leads to a significant enhancement of photovoltage and photocurrent density values, resulting in an improved power conversion efficiency.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %

Yuanjia Ding et al.

Summary: Among inorganic perovskites, CsPbI2Br shows great potential for single-junction perovskite solar cells (PSCs) and perovskite/organic tandem solar cells (TSCs) due to its intrinsic thermal stability, suitable bandgap, and superior phase-stability. This study demonstrates that using PTQ10 as a hole transport layer (HTL) for PSCs and an inter-connecting layer (ICL) for TSCs can significantly improve the power conversion efficiencies (PCEs) of CsPbI2Br-based devices. The PTQ10 HTL exhibits better energy level matching with CsPbI2Br and can passivate the perovskite surface, leading to enhanced performance in both PSCs and TSCs.

NANO TODAY (2022)

Article Physics, Applied

Dynamics of Internal Electric Field Screening in Hybrid Perovskite Solar Cells Probed Using Electroabsorption

Davide Moia et al.

Summary: This study demonstrates that electroabsorption measurements can track changes in the electric field within the active layer. The electric field strength decreases for externally applied low-frequency voltages or long times following voltage steps. This method has the potential to become a routine characterization tool for optimizing hybrid perovskite devices.

PHYSICAL REVIEW APPLIED (2022)

Review Engineering, Chemical

A Review of the Impact of Zinc Oxide Nanostructure Morphology on Perovskite Solar Cell Performance

Matshidiso Manabeng et al.

Summary: This review focuses on the impact of ZnO nanostructure morphologies on the performance of ZnO-based solar cells sensitized using methylammonium lead iodide perovskite. The synthesis routes and ways of controlling the morphology of ZnO nanostructures are discussed in detail, and it is found that one-dimensional structures show the most promise in increasing the photoconversion efficiency.

PROCESSES (2022)

Review Materials Science, Multidisciplinary

Strategies for high-performance perovskite solar cells from materials, film engineering to carrier dynamics and photon management

Huilin Li et al.

Summary: This review summarizes the recent research progress and the chemical-physical principles in the field of halide perovskite solar cells (HPSCs). The focus is on the latest developments in perovskite materials, technologies for perovskite films, charge transport materials, and photon management for preparing high-efficiency and long-term stability HPSCs.

INFOMAT (2022)

Article Chemistry, Multidisciplinary

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

Shan Tan et al.

Summary: The study revealed that phenyltrimethylammonium iodide (PTAI) and its corresponding LD perovskites demonstrate excellent thermal stability. Further investigation showed that PTAI-based LD perovskites are mainly distributed at grain boundaries, enhancing the phase stability of CsPbI3 and suppressing non-radiative recombination. As a result, the champion PSC device based on CsPbI3 achieved a record efficiency of 21.0% with high stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Review Chemistry, Multidisciplinary

Inorganic Electron Transport Materials in Perovskite Solar Cells

Liangyou Lin et al.

Summary: Over the past decade, there has been significant progress in the development of perovskite solar cells (PSCs), with improvements in power conversion efficiency and long-term stability making them competitive candidates for next-generation photovoltaics. This review focuses on the advancements in inorganic electron transport materials (ETMs) for PSCs, particularly the three most prevalent materials (TiO2, SnO2, and ZnO) and their applications in tandem devices. Strategies to optimize the performance of the electron transport layer (ETL) in PSCs and the impact of ETL on device stability and efficiency are also discussed.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Revealing Charge Carrier Mobility and Defect Densities in Metal Halide Perovskites via Space-Charge-Limited Current Measurements

Vincent M. Le Corre et al.

Summary: Space-charge-limited current (SCLC) measurements are widely used to study charge carrier mobility and trap density in semiconductors, but their application to metal halide perovskites is complicated by the mixed ionic and electronic nature of these materials. The presence of mobile ions strongly affects the measurements, requiring a refined analysis and interpretation of SCLC. Pulsed SCLC, combined with drift-diffusion simulations, offers a reliable method for simultaneously extracting mobility, trap, and ion densities in perovskite semiconductors.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Antisolvent- and Annealing-Free Deposition for Highly Stable Efficient Perovskite Solar Cells via Modified ZnO

Ziyu Wang et al.

Summary: A complexed ZnO material (E-ZnO) was developed as an improved electron selective layer in perovskite solar cells, showing higher electron mobility and better energy level matching compared to traditional ZnO. By utilizing E-ZnO and a new perovskite film fabrication process without annealing or antisolvent, the highest efficiency of 20.39% was achieved for PSCs. Additionally, unencapsulated PSCs with E-ZnO maintained 95% of their initial efficiency after exposure to ambient atmosphere for 3604 hours.

ADVANCED SCIENCE (2021)

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Article Nanoscience & Nanotechnology

Surface Engineering of Low-Temperature Processed Mesoporous TiO2 via Oxygen Plasma for Flexible Perovskite Solar Cells

Jiyoon Nam et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Engineering of the Electron Transport Layer/Perovskite Interface in Solar Cells Designed on TiO2 Rutile Nanorods

Fahimeh Shahvaranfard et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Improved Carrier Collection and Hot Electron Extraction Across Perovskite, C60, and TiO2 Interfaces

Jesus Jimenez-Lopez et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Toward Understanding Space-Charge Limited Current Measurements on Metal Halide Perovskites

Elisabeth A. Duijnstee et al.

ACS ENERGY LETTERS (2020)

Review Chemistry, Physical

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

Jingjing Tian et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Photoluminescence-Based Characterization of Halide Perovskites for Photovoltaics

Thomas Kirchartz et al.

ADVANCED ENERGY MATERIALS (2020)

Article Engineering, Environmental

Lead-free sodium bismuth halide Cs2NaBiX6 double perovskite nanocrystals with highly efficient photoluminesence

Chao Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Full Defects Passivation Enables 21% Efficiency Perovskite Solar Cells Operating in Air

Xixia Liu et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Materials Science, Multidisciplinary

Triple cation perovskite doped with the small molecule F4TCNQ for highly efficient stable photodetectors

Abbas Ahmad Khan et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Chemistry, Multidisciplinary

Surface Modification of TiO2 for Perovskite Solar Cells

Wanpei Hu et al.

TRENDS IN CHEMISTRY (2020)

Review Chemistry, Multidisciplinary

All-Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Jingru Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Review Chemistry, Inorganic & Nuclear

Mechanical properties of hybrid organic-inorganic perovskites

Li-Jun Ji et al.

COORDINATION CHEMISTRY REVIEWS (2019)

Article Chemistry, Physical

A thermally stable, barium-stabilized α-CsPbI3 perovskite for optoelectronic devices

Sandeep Kajal et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Jialong Duan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Editorial Material Chemistry, Physical

Hysteresis Index: A Figure without Merit for Quantifying Hysteresis in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ACS ENERGY LETTERS (2018)

Review Chemistry, Multidisciplinary

The Electrical and Optical Properties of Organometal Halide Perovskites Relevant to Optoelectronic Performance

Valerio Adinolfi et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Physical

The Potential of Multijunction Perovskite Solar Cells

Maximilian T. Horantner et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Multidisciplinary

Determination of Interfacial Charge-Transfer Rate Constants in Perovskite Solar Cells

Katarzyna Pydzinska et al.

CHEMSUSCHEM (2016)

Article Chemistry, Multidisciplinary

Stability Comparison of Perovskite Solar Cells Based on Zinc Oxide and Titania on Polymer Substrates

Yasmina Dkhissi et al.

CHEMSUSCHEM (2016)

Article Energy & Fuels

Performance Improvement of Perovskite Solar Cells Based on PCBM-Modified ZnO-Nanorod Arrays

Yang Xu et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2016)

Article Chemistry, Physical

Highly efficient low temperature solution processable planar type CH3NH3PbI3 perovskite flexible solar cells

Jin Hyuck Heo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO

Jinli Yang et al.

CHEMISTRY OF MATERIALS (2015)

Review Chemistry, Multidisciplinary

ZnO cathode buffer layers for inverted polymer solar cells

Zhiqiang Liang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

Lead-Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation

Mulmudi Hemant Kumar et al.

ADVANCED MATERIALS (2014)

Article Optics

Band filling with free charge carriers in organonietal halide perovskites

Joseph S. Manser et al.

NATURE PHOTONICS (2014)

Article Physics, Applied

Schottky solar cells based on CsSnI3 thin-films

Zhuo Chen et al.

APPLIED PHYSICS LETTERS (2012)

Article Chemistry, Physical

IR studies of EDTA alkaline salts interaction with the surface of inorganic oxides

J Ryczkowski

APPLIED SURFACE SCIENCE (2005)

Article Chemistry, Physical

Nanowire dye-sensitized solar cells

M Law et al.

NATURE MATERIALS (2005)

Article Thermodynamics

Phase transitions in ternary caesium lead bromide

M Rodova et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2003)