4.6 Article

Transition Metal Vacancy in Layered Cathode Materials for Sodium-Ion Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Multidisciplinary

Cationic Vacancies in Anatase (TiO2): Synthesis, Defect Characterization, and Ion-Intercalation Properties

Damien Dambournet

Summary: This study explores the recent progress in solution-based synthesis of anatase, with a focus on the use of fluoride precursors to stabilize crystals with tailored facets. The findings highlight the influence of stabilized defect structures on the reactivity of titanium ions and the ion-intercalation properties, particularly the selective intercalation of polyvalent ions.

ACCOUNTS OF CHEMICAL RESEARCH (2022)

Article Chemistry, Multidisciplinary

Unusual Site-Selective Doping in Layered Cathode Strengthens Electrostatic Cohesion of Alkali-Metal Layer for Practicable Sodium-Ion Full Cell

Bo Peng et al.

Summary: The P2-type Na0.67Ni0.33Mn0.67O2 cathode material achieves stable cycling and moisture resistancy at a higher voltage through dual-site doping with Cu ion and unusual Zn ion. This unique dual-site-doped cathode exhibits excellent cyclic performance and capacity retention at high rates, demonstrating its potential for practical applications.

ADVANCED MATERIALS (2022)

Review Chemistry, Multidisciplinary

Unraveling Anionic Redox for Sodium Layered Oxide Cathodes: Breakthroughs and Perspectives

Haixia Ren et al.

Summary: This review systematically summarizes the development history and mechanism of anionic redox reaction in layered transition metal oxides. Challenges and strategies for triggering and stabilizing anionic redox are discussed, and different types of sodium layered oxide cathodes are classified and compared. The review also provides an overview of characterization techniques for anionic oxygen redox. Finally, the prospective and future development directions of sodium layered transition oxide with anionic redox reaction are analyzed and suggested.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Enabling Anionic Redox Stability of P2-Na5/6Li1/4Mn3/4O2 by Mg Substitution

Yangyang Huang et al.

Summary: In this study, stable anionic redox reactions were achieved by substituting sodium ions with magnesium ions in P2-type sodium-rich layered oxide. The density functional theory (DFT) calculations showed that magnesium substitution effectively decreased the oxygen chemical potential, leading to improved lattice oxygen stability. It was also found that at a highly desodiated state, the remaining magnesium ions in the lattice could interact with oxygen 2p orbitals, facilitating the reversibility of oxygen redox. Cycling tests demonstrated that Na0.773Mg0.03Li0.25Mn0.75O2 exhibited better cycle stability compared to Na0.83Li0.25Mn0.75O2. The experimental results also showed that Na0.773Mg0.03Li0.25Mn0.75O2 had a zero-strain cathode behavior.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Detection of trapped molecular O2 in a charged Li-rich cathode by Neutron PDF

Robert A. House et al.

Summary: By presenting neutron PDF data, it was demonstrated that the charged O-redox cathode material contains molecular O-2, which could potentially increase the energy density of Li-ion batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Chemistry, Multidisciplinary

Synergetic stability enhancement with magnesium and calcium ion substitution for Ni/Mn-based P2-type sodium-ion battery cathodes

Hongwei Fu et al.

Summary: The study successfully doped magnesium and calcium ions into Na0.67Ni0.33Mn0.67O2 to improve cycling endurance by reducing O-type stacking in the high-voltage region, leading to a decrease in capacity. Density functional theory studies showed that the introduction of Mg2+ and Ca2+ made high-voltage reactions less accessible.

CHEMICAL SCIENCE (2022)

Article Chemistry, Physical

Na2.4Al0.4Mn2.6O7 anionic redox cathode material for sodium-ion batteries - a combined experimental and theoretical approach to elucidate its charge storage mechanism

Cindy Soares et al.

Summary: In this study, a high-performance Mn-rich Na2.4Al0.4Mn2.6O7 oxygen-redox cathode material was synthesized using ceramic methods. The effects of Al substitution and Na excess on the high-capacity, anionic redox-based cathode material Na2Mn3O7 were studied using this material as a testbed. The material exhibited stable electrochemical performance, with a specific capacity of 215 mA h g(-1) in the 1.5-4.7 V voltage range at C/20 and a capacity retention of 90% after 40 cycles. By combining electrochemical and structural analysis with hybrid density functional theory calculations, the behavior of this material during electrochemical cycling and its comparison to Na2Mn3O7 were explained. These findings are expected to contribute to the advancement of Mn-rich cathode materials with oxygen redox activity for high-performance sodium-ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Effect of vacancy-tailored Mn3+ spinning on enhancing structural stability

Lu Yang et al.

Summary: This study introduced vacancy-containing and vacancy-free cathode materials to investigate how transition metal vacancies affect the spinning states of Mn3+ ions, leading to improved structural stability and performance. Density functional theory calculations and advanced physical characterizations provided insights into the mechanisms underlying the enhanced properties of the materials.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Unveiling the Complementary Manganese and Oxygen Redox Chemistry for Stabilizing the Sodium-Ion Storage Behaviors of Layered Oxide Cathodes

Junteng Jin et al.

Summary: This study reveals a complementary Mn and O redox mechanism in a novel P2-Na0.75Ca0.04[Li0.1Ni0.2Mn0.67]O-2 cathode. The partial oxygen release activates more Mn3+/Mn4+ redox capacities, leading to ultra-stable cycling performance and exceptional rate capability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Unraveling vacancy-induced oxygen redox reaction and structural stability in Na-based layered oxides

Mobinul Islam et al.

Summary: This study introduces vacancies into sodium manganese oxide cathode to oxidize manganese ion close to +4 oxidation state, overcoming the detrimental structural distortion and enabling oxygen redox reaction. The cathode with vacancies shows better cycling stability compared to the distorted pristine counterpart. Transition-metal vacancies play a critical role in triggering anionic redox reaction and manipulating phase transitions in layered cathodes.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Anionic Redox and Electrochemical Kinetics of the Na2Mn3O7 Cathode Material for Sodium-Ion Batteries

Charifa Hakim et al.

Summary: Manganese-based layered oxides, especially Na2Mn3O7, have shown promise as cathode materials for sodium-ion batteries due to their cost-effectiveness and non-toxicity. However, the charge compensation mechanisms during battery operation are still unclear.

ENERGY & FUELS (2022)

Article Chemistry, Physical

Reversible anionic redox chemistry in layered Li4/7[□1/7Mn6/7]O2 enabled by stable Li-O-vacancy configuration

Xin Cao et al.

Summary: The combination of anionic and cationic activities in Li-rich materials has achieved high-energy-density batteries by breaking through the traditional capacity limitation. However, the utilization of anionic oxygen redox reactions often leads to detrimental lattice oxygen release, which accelerates structural distortion and electrochemical performance deterioration. This study found that the introduction of Mn vacancy enables reversible oxygen redox behaviors within layered Li-4/7[square Mn-1/7(6/7)]O-2 with Li-O-vacancy configuration, effectively suppressing lattice oxygen loss and improving the output capacity and long-term cycling stability of batteries.
Article Chemistry, Physical

Stable electronic structure related with Mn4+-O-? coupling determines the anomalous nonhysteretic behavior in Na2Mn3O7

Chong Zhao et al.

Summary: Oxygen redox has both benefits and drawbacks for battery cathodes. This study focuses on Na2Mn3O7, which exhibits an abnormal small voltage hysteresis during oxygen redox. The stable electronic structure and dispersive oxygen redox in Na2Mn3O7 are proposed as the reasons for this abnormal behavior.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Low-cost layered oxide cathode involving cationic and anionic redox with a complete solid-solution sodium-storage behavior

Yao Wang et al.

Summary: The research presents a new approach to achieving high-energy and long-life layered oxide cathodes in sodium-ion batteries by developing a novel P2-NCLFMO material and realizing a complete solid-solution sodiation/desodiation behavior over a wide voltage range. The P2-NCLFMO cathode exhibits outstanding rate capability and cycling performance, and when paired with a hard carbon anode, it delivers a promising energy density for sodium-ion full batteries.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

π-type orbital hybridization and reactive oxygen quenching induced by Se-doping for Li-rich Mn-based oxide cathode

Jun Chen et al.

Summary: Electrochemically stable Li-rich Mn-based oxide cathode is successfully designed by manipulating molecular polarity within host structure through the introduction of Se, resulting in improved stability and reduced oxygen loss. This work provides a potential avenue for advanced electrodes in lithium-ion batteries.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Vacancy-enhanced oxygen redox and structural stability of spinel Li2Mn3O7-x

Lu Yang et al.

Summary: Vacancies have a similar effect on the cathode materials of both Na-ion and Li-ion batteries.

CHEMICAL COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

Synthesis, Structure, Electrochemical Mechanisms, and Atmospheric Stability of Mn-Based Layered Oxide Cathodes for Sodium Ion Batteries

Wenhua Zuo et al.

Summary: The commercialization of lithium ion batteries has revolutionized portable electronics and electric vehicles, while also offering potential as large-scale storage batteries in green electric grids. Sodium ion batteries have emerged as strong competitors for large-scale energy storage due to concerns about lithium depletion and fluctuating mineral prices. This article focuses on the investigation of layered sodium transition metal oxide as a leading cathode material for sodium ion batteries, particularly those based on manganese. The article highlights the challenges and strategies for enhancing atmospheric stability and electrochemical reversibility, as well as the synthesis, phase diversity, and charge-compensation mechanisms of these materials.

ACCOUNTS OF MATERIALS RESEARCH (2022)

Article Chemistry, Physical

Enhanced oxygen redox reversibility and capacity retention of titanium-substituted Na4/7[1/7Ti1/7Mn5/7]O2 in sodium-ion batteries

Stephanie F. Linnell et al.

Summary: Ti4+ substitution in Na-4/7[1/7Ti1/7Mn5/7]O-2 enhances its electrochemical performance by maintaining structural stability and increasing operating potential. This work provides insights and strategies for improving the performance of sodium layered oxides.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Mg-Pillared LiCoO2: Towards Stable Cycling at 4.6 V

Yangyang Huang et al.

Summary: Mg-pillared LiCoO2, doped with Mg ions to prevent unfavorable phase transitions at high voltages, exhibits high capacity and enhanced cycling stability compared to pristine LiCoO2.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Vacancy-Enabled O3 Phase Stabilization for Manganese-Rich Layered Sodium Cathodes

Biwei Xiao et al.

Summary: A high-capacity and stable O3 phase sodium cathode material has been developed by leveraging transition metal and oxygen vacancies, leading to increased kinetic barrier that prohibits a complete O3-P3 phase transition.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Electrochemistry

Probing the effect of Mg doping on triclinic Na2Mn3O7 transition metal oxide as cathode material for sodium-ion batteries

Dumindu P. Siriwardena et al.

Summary: The doping of Mg2+ can enhance the specific capacities and rate capabilities of triclinic Na2Mn3O7 cathode materials, leading to reversible phase transformations during Na+ intercalation. The electrochemical properties are mainly influenced by the Mn4+/3+ redox couple and the reversible O2-/n- redox reaction, with Mg2+ playing a role in reducing Na+ vacancy ordering and improving Na+ diffusion.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Activation of anion redox in P3 structure cobalt-doped sodium manganese oxide via introduction of transition metal vacancies

Eun Jeong Kim et al.

Summary: The study synthesized P3-structure Na0.67Co0.2Mn0.8O2, showing very stable cycling performance in the voltage range of 1.8-3.8 V where the redox couples of transition metals entirely dominate the electrochemical reaction.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Multidisciplinary

Delocalized Metal-Oxygen π-Redox Is the Origin of Anomalous Nonhysteretic Capacity in Li-Ion and Na-Ion Cathode Materials

Daniil A. Kitchaev et al.

Summary: The study presents the first consistent mechanism of nonhysteretic oxidation beyond the transition metal limit, explaining the electrochemical and structural evolution of Na2Mn3O7 and Li2IrO3 model materials. The source of anomalous nonhysteretic capacity is identified as a pi-bonded metal-d and O-p orbital network, enabled by a unique resistance to transition metal migration. Voltage, accessible capacity, and structural evolution upon oxidation are shown to be collective properties of the pi-network rather than local bonding environments.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Multidisciplinary Sciences

Pillar-beam structures prevent layered cathode materials from destructive phase transitions

Yuesheng Wang et al.

Summary: The lack of competent cathodes with large capacities and long cycle lives has hindered the commercialization of sodium-ion batteries. A new pillar-beam structured cathode with inert potassium ions has been developed to enhance energy density and cycle life by allowing free diffusion of sodium ions without structural degradation.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Nonpolarizing oxygen-redox capacity without O-O dimerization in Na2Mn3O7

Akihisa Tsuchimoto et al.

Summary: This study focuses on the origin of voltage hysteresis in oxygen-redox reactions, particularly exploring the stable O· oxygen atoms identified in the Na2-xMn3O7 material. The results indicate that the presence of O· oxygen atoms and the hole stabilization through a (sigma+) multiorbital Mn-O bond are key factors for its small polarization and large capacity.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Whole-Voltage-Range Oxygen Redox in P2-Layered Cathode Materials for Sodium-Ion Batteries

Xun-Lu Li et al.

Summary: The study demonstrates reversible oxygen-redox in a wide voltage range of 1.5-4.5 V in layered metal-oxide cathodes, attributing the stability to Mg-ions as pillars in the Na layer and the triggering of oxygen-redox to intrinsic vacancies in the TM layer. Charge compensation from Mn- and O-ions contributes to the whole voltage range, while Fe-ions only contribute to the high-voltage region. The reversible oxygen-redox is achieved by orphaned electrons in O's nonbonding 2p orbitals pointing toward TM-vacancy sites, while Mg-ions in Na sites effectively suppress oxygen release.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Coexistence of (O2)n- and Trapped Molecular O2 as the Oxidized Species in P2-Type Sodium 3d Layered Oxide and Stable Interface Enabled by Highly Fluorinated Electrolyte

Chong Zhao et al.

Summary: The study reveals the coexistence of oxidized oxygen species during the sodiation process of Na-ion layered oxide and introduces a highly fluorinated electrolyte to construct a stable interface, enabling a highly reversible oxygen redox reaction. The fluorinated CEI film significantly improves the cycling stability and Coulombic efficiency of the cathode material, highlighting the importance of managing oxidized oxygen species for stable interfacial behavior.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Tuning Sodium Occupancy Sites in P2-Layered Cathode Material for Enhancing Electrochemical Performance

Qin-Chao Wang et al.

Summary: The study successfully improved the sodium ion transport and electrochemical performance by adjusting the occupancy ratio of two different sodium sites in P2 layered cathode materials. In situ X-ray absorption spectroscopy revealed charge compensation provided by Mn and Ni redox couples. Sb substitution suppressed phase transition in the high voltage region, ensuring structural stability.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Boosting Reversibility of Mn-Based Tunnel-Structured Cathode Materials for Sodium-Ion Batteries by Magnesium Substitution

Xun-Lu Li et al.

Summary: A new strategy of introducing Mg ions into Mn-based tunnel-structured cathode materials is designed to improve the cycle stability and rate capability of sodium-ion batteries. The enhanced Na+ diffusion kinetics and lowered desodiation energy after Mg doping contribute to the improved performance. High reversible charge compensation and structure evolution are proved by synchrotron-based X-ray techniques.

ADVANCED SCIENCE (2021)

Article Multidisciplinary Sciences

Defect engineering on V2O3 cathode for long-cycling aqueous zinc metal batteries

Kefu Zhu et al.

Summary: Defect engineering is being used to modify battery active materials for improved cycling stability of electrodes. This study quantified vanadium-defective clusters in the V2O3 lattice and found that the defects lead to favorable sites for reversible Zn-ion storage in aqueous Zn coin cell configuration, resulting in 81% capacity retention after 30,000 cycles at 5 A g(-1). The findings suggest that aqueous Zn metal batteries with vanadium-defective V2O3 cathodes could be a promising system for high-power electrochemical energy storage.

NATURE COMMUNICATIONS (2021)

Article Energy & Fuels

The role of O2 in O-redox cathodes for Li-ion batteries

Robert A. House et al.

Summary: This study explores the mechanisms and impacts of oxygen redox in lithium-ion batteries, proposing a unified model to reduce instability caused by oxygen redox and provide strategies for achieving more reversible, high energy density cathodes.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Pinning Effect Enhanced Structural Stability toward a Zero-Strain Layered Cathode for Sodium-Ion Batteries

Shiyong Chu et al.

Summary: Layered oxides as cathode materials for sodium-ion batteries are being explored for their high capacity and flexible composition. The introduction of Fe3+-pinned Na sites has shown to inhibit slab sliding, resulting in exceptional cycle performance and high rate capability in Na storage layered cathodes.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Chenchen Wang et al.

Summary: In this study, a layered P2-Na0.612K0.056MnO2 with large-sized K+ riveted in the Na-layers enables 0.9 Na+ (de)insertion with a reversible phase transition of P2-P'2. This cathode material demonstrates the highest specific capacity and energy density based on the redox of Mn3+/Mn4+, with high capacity retention after 100 cycles. This research provides insights into tunable chemical environments of transition-metal oxides for advanced cathode materials and promotes the development of sodium-ion batteries. High capacity and structural stable cathode materials remain challenges for sodium-ion batteries.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Bulk O2 formation and Mg displacement explain O-redox in Na0.67Mn0.72Mg0.28O2

Edouard Boivin et al.

Summary: Redox processes involving O-2 formation and reduction were observed in compounds containing Mg2+ on the transition-metal layers (TML), similar to what occurs in compounds with Li+. However, there are differences in the behavior of the compounds during cycling. The re-appearance of the high-voltage plateau in P2-Na-0.(67)[Mn0.72Mg0.28]O-2 during the second charge is attributed to the partial reversibility of Mn and Mg migration and the local reformation of the honeycomb ordering.
Article Nanoscience & Nanotechnology

Insights of the Electrochemical Reversibility of P2-Type Sodium Manganese Oxide Cathodes via Modulation of Transition Metal Vacancies

Zhumei Xiao et al.

Summary: This study investigates the effects of transition metal vacancies on layered oxides by substituting Al into Na2/3MnO2. Results show that higher contents of TM vacancies help maintain P2 structure stability, while lower contents provide higher discharge capacity but with complicated phase transitions. Regulating the content of TM vacancies can effectively tune the structure stability and electrochemical performance of layered sodium oxide cathodes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Transition-Metal Vacancy Manufacturing and Sodium-Site Doping Enable a High-Performance Layered Oxide Cathode through Cationic and Anionic Redox Chemistry

Qiuyu Shen et al.

Summary: A novel P2-Na0.76Ca0.05[Ni0.230.08Mn0.69]O-2 cathode material with joint cationic and anionic redox activities has been developed, showing enhanced energy density and cycling stability. This research provides new opportunities for designing high-energy-density and high-stability layered sodium oxide cathodes through tuning local chemical environments.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Stabilizing Transition Metal Vacancy Induced Oxygen Redox by Co2+/Co3+ Redox and Sodium-Site Doping for Layered Cathode Materials

Xun-Lu Li et al.

Summary: Anionic redox can boost the energy density of metal-oxide cathodes, but TMO6 subunits are inherently rigid and may not tolerate inner strains induced by lattice glide. A designed material with vacancies in TM sites and Mg ions improves flexibility and stability, maintaining a long voltage plateau at 4.2 V during deep desodiation. The strategy paves the way for highly stable cathode materials with reversible anionic redox for sodium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

Covalency does not suppress O2 formation in 4d and 5d Li-rich O-redox cathodes

Robert A. House et al.

Summary: Recent findings suggest that Li-rich transition metal oxides undergo O-redox, forming molecular oxygen trapped in the particles during oxidation. This phenomenon occurs across 3d, 4d, and 5d transition metal oxides, indicating a greater covalency in the 4d and 5d compounds does not stabilize peroxo-like species. High resolution RIXS and XAS data for Li2IrO3 support a charge compensation mechanism associated primarily with Ir redox without evidence of O-O dimerization.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Applied

Ultralow-strain Ti substituted Mn-vacancy layered oxides with enhanced stability for sodium-ion batteries

Yanchen Liu et al.

Summary: Introducing Ti4+ to substitute partial Mn4+ in layered manganese-based oxide cathodes can enhance the structural stability, capacity retention, and cycling performance, providing insights for designing high-performance cathode materials for sodium-ion batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Electrochemistry

Sublimated Se-Induced Formation of Dual-Conductive Surface Layers for High-Performance Ni-Rich Layered Cathodes

Shi Chen et al.

Summary: The Se coating is a novel and simple method for modifying Ni-rich layered oxide cathode materials, preventing performance degradation while enhancing battery capacity and rate performance.

CHEMELECTROCHEM (2021)

Article Chemistry, Physical

Unveiling Oxygen Redox Activity in P2-Type NaxNi0.25Mn0.68O2 High-Energy Cathode for Na-Ion Batteries

Arianna Massaro et al.

Summary: This study dissects the oxygen redox activity mechanism in Mn-deficient NaxNi0.25Mn0.68O2 from first-principles and proposes partial substitution of Ni with Fe to improve cathode stability. These findings provide a solid scientific foundation for rational design of new anionic redox-active cathode materials.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Coulombically-stabilized oxygen hole polarons enable fully reversible oxygen redox

Iwnetim I. Abate et al.

Summary: This study investigates the stabilization mechanism of oxygen redox in layered Na2-xMn3O7, revealing that coulombic interactions between oxidized oxide-anions and interlayer Na vacancies can stabilize hole polarons on oxygen. These interactions provide significant thermodynamic energy savings and enable voltage hysteresis over multiple electrochemical cycles without voltage fade. The results highlight the role of coulombic interactions in stabilizing highly oxidized oxygen for applications in energy storage and beyond.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Towards controlling the reversibility of anionic redox in transition metal oxides for high-energy Li-ion positive electrodes†

Yang Yu et al.

Summary: Anionic redox in positive electrode materials of Li-ion batteries provides additional redox couple, but the reversible activity remains under debate. Different substituents have minimal effect on metal redox but introduce irreversible oxygen redox. Strong metal-oxygen covalency is crucial for enhancing reversible oxygen redox.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Mitigating the P2-O2 transition and Na+/vacancy ordering in Na2/3Ni1/3Mn2/3O2 by anion/cation dual-doping for fast and stable Na+ insertion/extraction

Qianjiang Mao et al.

Summary: In this study, a controlled F-/Ca2+ dual-doping strategy was proposed to mitigate the P2-O2 phase transition, significantly improving the structural stability and cycling performance. The doping of Ca2+ and F- facilitated electronic and ionic conductivity, enhancing the high-rate capability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

A comprehensive understanding of the anionic redox chemistry in layered oxide cathodes for sodium-ion batteries

Junteng Jin et al.

Summary: The strategy of activating anionic redox in the cathodes of sodium-ion batteries has been shown to significantly improve energy density, leading to new advancements in the field. The latest progress and challenges of anionic redox in layered oxide cathodes have been comprehensively reviewed and discussed, providing valuable insights for future research on high-energy cathode materials.

SCIENCE CHINA-CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Understanding Rechargeable Battery Function Using In Operando Neutron Powder Diffraction

Gemeng Liang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Constructing Na-Ion Cathodes via Alkali-Site Substitution

Chenglong Zhao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Recent Progress of P2-Type Layered Transition-Metal Oxide Cathodes for Sodium-Ion Batteries

Liu Zhengbo et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Article Chemistry, Physical

Rod -shaped monoclinic CoMo 2 S 4 with conversion for sodium storage exceptionally reversible phase

Xun-Lu Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Tunable Cationic Vacancies of Cobalt Oxides for Efficient Electrocatalysis in Li-O2Batteries

Xiaomeng Liu et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Multidisciplinary

Defect Chemistry on Electrode Materials for Electrochemical Energy Storage and Conversion

Yiqiong Zhang et al.

CHEMNANOMAT (2020)

Article Chemistry, Multidisciplinary

Redox Chemistry and the Role of Trapped Molecular O2 in Li-Rich Disordered Rocksalt Oxyfluoride Cathodes

Ryan Sharpe et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Unified picture of anionic redox in Li/Na-ion batteries

Mouna Ben Yahia et al.

NATURE MATERIALS (2019)

Article Chemistry, Physical

Understanding the Low-Voltage Hysteresis of Anionic Redox in Na2Mn3O7

Bohang Song et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Multidisciplinary

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries

Qin-Chao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Native Vacancy Enhanced Oxygen Redox Reversibility and Structural Robustness

Yejing Li et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Decreasing transition metal triggered oxygen redox activity in Na-deficient oxides

Chenglong Zhao et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Review Chemistry, Physical

Advanced Characterization Techniques for Sodium-Ion Battery Studies

Zulipiya Shadike et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Highly Reversible Oxygen-Redox Chemistry at 4.1 V in Na4/7-x[square 1/7Mn6/7]O2 (square: Mn Vacancy)

Benoit Mortemard de Boisse et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Iron migration and oxygen oxidation during sodium extraction from NaFeO2

Yejing Li et al.

NANO ENERGY (2018)

Article Chemistry, Physical

Na2Mn0.33+Mn2.74+O6.85: A cathode with simultaneous cationic and anionic redox in Na-ion battery

Qidi Wang et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Multidisciplinary

Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries

Chuze Ma et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Review Chemistry, Multidisciplinary

Anionic Redox in Rechargeable Lithium Batteries

Biao Li et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Physical

Na2Mn3O7: A Suitable Electrode Material for Na-Ion Batteries?

Evan Adamczyk et al.

CHEMISTRY OF MATERIALS (2017)

Article Nanoscience & Nanotechnology

P2 Orthorhombic Na0.7[Mn1-xLix]O2+y as Cathode Materials for Na-Ion Batteries

Mi-Sook Kwon et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Sodium and Manganese Stoichiometry of P2-Type Na2/3MnO2

Shinichi Kumakura et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Physical

Jahn-Teller Assisted Na Diffusion for High Performance Na Ion Batteries

Xin Li et al.

CHEMISTRY OF MATERIALS (2016)

Editorial Material Chemistry, Multidisciplinary

BATTERY MATERIALS Operating through oxygen

Claude Delmas

NATURE CHEMISTRY (2016)

Article Chemistry, Physical

Anionic redox processes for electrochemical devices

A. Grimaud et al.

NATURE MATERIALS (2016)

Article Chemistry, Physical

The Role of Metal Site Vacancies in Promoting Li-Mn-Ni-O Layered Solid Solutions

E. McCalla et al.

CHEMISTRY OF MATERIALS (2013)

Article Chemistry, Physical

Reversible anionic redox chemistry in high-capacity layered-oxide electrodes

M. Sathiya et al.

NATURE MATERIALS (2013)

Article Chemistry, Physical

Origin of additional capacities in metal oxide lithium-ion battery electrodes

Yan-Yan Hu et al.

NATURE MATERIALS (2013)

Article Chemistry, Multidisciplinary

Revisiting Prussian Blue Analogues with Solid-State MAS NMR Spectroscopy: Spin Density and Local Structure in [Cd-3{Fe(CN)(6)}(2)]center dot 15 H2O

Alexandrine Flambard et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2009)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Article Chemistry, Inorganic & Nuclear

Synthesis of NaxMnO2+δ by a reduction of aqueous sodium permanganate with sodium iodide

YU Jeong et al.

JOURNAL OF SOLID STATE CHEMISTRY (2001)