☆ 4.7 Article

Moisture-assistant chlorinated separator with dual-protective interface for ultralong-life and high-rate lithium metal batteries

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

An Ion-Dipole-Reinforced Polyether Electrolyte with Ion-Solvation Cages Enabling High-Voltage-Tolerant and Ion-Conductive Solid-State Lithium Metal Batteries

Kun Zhang et al.

Summary: Solid-state electrolytes with enhanced properties play a crucial role in the development of energy-dense solid-state lithium metal batteries. The use of ion-dipole-reinforced poly-3-hydroxymethyl-3-methyloxetane as a novel SSE shows promising results in terms of high voltage tolerance, ion conduction, and mechanical properties when further composited with a polypropylene skeleton.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Progress of carbon and Metal-Based Three-Dimensional materials for Dendrite-Proof and Interface-Compatible lithium metal anode

Yuheng Sun et al.

Summary: With the increasing demand for high energy storage devices, lithium metal batteries (LMBs) have attracted wide interest due to their high theoretical energy density and specific capacity. However, the growth of Li dendrites has hindered the application and development of Li metal anodes. Rational design of the electrode-electrolyte interface is crucial for dendrite-proof and interface-compatible LMBs. Three-dimensional (3D) materials, with their excellent structural stability and easy-to-control hierarchical structure, have been focused on to address the interface problems of Li metal anodes.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Structural, thermal and electrochemical characterization of cellulose acetate-based solid biopolymer electrolyte for zinc ion batteries

B. Bhuvaneswari et al.

Summary: A zinc ion conducting biopolymer electrolyte was prepared using cellulose acetate and zinc nitrate. Various tests were conducted to study the characteristics of the electrolyte, including amorphous nature, complex creation, and conductivity. A primary zinc battery was constructed and the open circuit voltage was measured.

IONICS (2022)

添加到收藏夹

Article Chemistry, Physical

8.5 μm-Thick Flexible-Rigid Hybrid Solid-Electrolyte/Lithium Integration for Air-Stable and Interface-Compatible All-Solid-State Lithium Metal Batteries

Kun Zhang et al.

Summary: This paper proposes an air-stable and interface-compatible solid electrolyte/lithium integration method for high-performance all-solid-state lithium batteries. The in situ copolymerization technique ensures the stability and efficiency of the batteries, with enhanced cycle stability and dendrite suppression.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Li4Ti5O12 Coating on Copper Foil as Ion Redistributor Layer for Stable Lithium Metal Anode

Xiaosong Xiong et al.

Summary: The inverse concentration gradient design improves the performance of lithium metal anodes, especially at high current density. By fabricating an artificial coating layer on copper foil and forming a high concentration Li+ ions region near the electrode interface during the initial activation process, the effects caused by ion depletion are alleviated, leading to stable dendrite-free cycling.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Regulated lithium deposition behavior by chlorinated hybrid solid-electrolyte-interphase for stable lithium metal anode

Wencheng Ma et al.

Summary: This study reveals, for the first time, the rationality of Li deposition beneath the chlorinated hybrid layer and fast ion transport kinetics at LiCl/Li interface through density functional theory estimation. An artificial SEI layer enriched with LiCl is constructed on lithium metal surface, which exhibits excellent cycle performance and lower overpotential.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Energy & Fuels

Recent progress of sulfide electrolytes for all-solid-state lithium batteries

Han Su et al.

Summary: This article presents recent progress in sulfide electrolytes, focusing on electrolyte synthesis mechanisms, stability, and their relationship with high-energy-density all-solid-state lithium batteries.

ENERGY MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Perspective of polymer-based solid-state Li-S batteries

Julen Castillo et al.

Summary: This perspective article briefly summarizes the recent progress on polymer-based solid-state Li-S batteries, with a special focus on electrolytes, and proposes future work based on the existing development and current challenges.

ENERGY MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Semi-interpenetrating gel polymer electrolyte based onPVDF-HFPfor lithium ion batteries

Kaili Luo et al.

Summary: The semi-interpenetrating GPE based on PVDF-HFP is designed and synthesized through UV-irradiation technique, showing relatively high ionic conductivity and electrochemical window, demonstrating promising potential for application in rechargeable LIBs.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elevated Lithium Ion Regulation by a Natural Silk Modified Separator for High-Performance Lithium Metal Anode

Xiang Li et al.

Summary: This research developed a functional modification layer from a derivant of natural silk to protect the lithium anode, offering abundant functional group sites for efficient uniform Li-ion flux and in situ formation of a Li3N-rich solid electrolyte interphase film. The high-performance lithium metal anode achieved dendrite-free morphology and significantly enhanced cycle stability, showing long-term cycling stability of 3000 cycles when paired with LiFePO4 cathodes and over 400 cycles with sulfur cathodes. This study provides a facile and practical approach for interface modification of the high-performance lithium anode and explores the application of biomass-based materials in advanced batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase

Jian Tan et al.

Summary: Rechargeable lithium batteries have transformed energy storage technology, but their further commercialization is hindered by short lifetime and safety issues, mainly due to the unstable solid-electrolyte interphase (SEI) and uncontrolled lithium dendrite growth. Research on SEI worldwide has focused on its debated structure and composition, particularly the role of the main component LiF. This review covers the development history of the SEI model, fundamental understanding of SEI, categorization of anode materials generating LiF in SEI, characterization techniques of SEI layers, transport mechanism of Li+ ions within SEI, physical properties of LiF, and analysis of LiF sources, offering insights for future research directions to promote large-scale applications of lithium metal batteries.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Designing Polymer-in-Salt Electrolyte and Fully Infiltrated 3D Electrode for Integrated Solid-State Lithium Batteries

Wenyi Liu et al.

Summary: A solid-state lithium battery with high room-temperature ionic conductivity was designed, achieving faster Li+ transport and superior electrochemical performance through the construction of an integrated model SSLB.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Chlorinated dual-protective layers as interfacial stabilizer for dendrite-free lithium metal anode

Ke Zhang et al.

Summary: The study proposes a dual-protective layer structure to effectively suppress uncontrollable dendrite growth in lithium metal batteries, enhancing their stability and cycle lifespan. Through synergy, dendrite-proof lithium deposition, high Li+ diffusion rate, and long-term stability have been achieved.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In-Built Quasi-Solid-State Poly-Ether Electrolytes Enabling Stable Cycling of High-Voltage and Wide-Temperature Li Metal Batteries

Yong Chen et al.

Summary: The study introduces an advanced solid-state electrolyte with enhanced compatibility at the electrode/electrolyte interface, resulting in excellent cyclic stability in batteries operating over a wide temperature range and high voltage. This lays the foundation for the development of practical solid-state metal batteries (SSMBs) meeting the demands for wide-temperature applicability, high-energy density, long lifespan, and mass production.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Review Chemistry, Applied

Lithium metal batteries for high energy density: Fundamental electrochemistry and challenges

Mingda Gao et al.

Summary: The dependence on portable devices and electric vehicles has led to a growing awareness of energy storage systems with high energy density, leading to a revival of interest in lithium metal batteries (LMBs). However, the growth of lithium dendrite during the electro-chemical process presents challenges for LMBs application, limiting Coulombic efficiency and causing safety issues. Understanding the mechanisms of lithium nucleation and dendrite growth is essential for addressing these challenges.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Review Physics, Applied

Reviewing the Safe Shipping of Lithium-Ion and Sodium-Ion Cells: A Materials Chemistry Perspective

Ashish Rudola et al.

Summary: This article discusses the safety issues of high energy density lithium-ion and sodium-ion batteries during storage and transportation. While lithium-ion batteries require shipping at 30% SOC or lower, sodium-ion batteries can be safely discharged to 0V. The difference in storage and transportation requirements between the two types of batteries is highlighted, with sodium-ion batteries benefitting from the use of aluminum current collectors for safer transportation.

ENERGY MATERIAL ADVANCES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Interface issues of lithium metal anode for high-energy batteries: Challenges, strategies, and perspectives

Yiyao Han et al.

Summary: Lithium metal is considered one of the most promising materials for future high-energy-density storage systems, but its practical application is hindered by interfacial and air instabilities. Recent efforts have overcome many bottlenecks and accelerated the application of high-energy-density lithium metal batteries.

INFOMAT (2021)

添加到收藏夹

Review Physics, Applied

Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect

Xin Shen et al.

Summary: This article summarizes the historical developments of practical electrode materials in lithium-ion batteries, discusses the emerging electrode materials for next-generation batteries, and presents the future scenario of high-energy-density rechargeable batteries. The combination of theory and experiment under multiscale is highlighted to promote the development of emerging electrode materials.

ENERGY MATERIAL ADVANCES (2021)

添加到收藏夹

Article Engineering, Environmental

Phosphorus-sulfur/graphene composites as flexible lithium-sulfur battery cathodes with super high volumetric capacity

Cheng-Chieh Chuang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

Junfan Ding et al.

CHINESE CHEMICAL LETTERS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries

Song Li et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Lithium ion conducting biopolymer membrane based on K-carrageenan with LiNO3

I. Arockia Mary et al.

IONICS (2020)

添加到收藏夹

Article Electrochemistry

Interface stability of LiCl-rich argyrodite Li6PS5Cl with propylene carbonate boosts high-performance lithium batteries

Yang Li et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Physical

[BMIM]BF4-modified PVDF-HFP composite polymer electrolyte for high-performance solid-state lithium metal battery

Kaixiong Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Physical

Interlayer design based on carbon materials for lithium-sulfur batteries: a review

Lei Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Energy & Fuels

Pathways for practical high-energy long-cycling lithium metal batteries

Jun Liu et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Dendrite-free lithium metal anode enabled by separator engineering via uniform loading of lithiophilic nucleation sites

Yangyang Liu et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Solid polymer electrolytes based on lithium bis(trifluoromethanesulfonyl)imide/poly(vinylidene fluoride -co-hexafluoropropylene) for safer rechargeable lithium-ion batteries

R. Goncalves et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Progress and Perspective of Solid-State Lithium-Sulfur Batteries

Danni Lei et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes

Nian-Wu Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Armored Mixed Conductor Interphase on a Dendrite-Free Lithium-Metal Anode

Chong Yan et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress on sodium ion batteries: potential high-performance anodes

Li Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Review Chemistry, Physical

Nanoscale perspective: Materials designs and understandings in lithium metal anodes

Dingchang Lin et al.

NANO RESEARCH (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

添加到收藏夹

Article Construction & Building Technology

Factors governing mass transfer during membrane electrodialysis regeneration of LiCl solution for liquid desiccant dehumidification systems

Ali Al-Jubainawi et al.

SUSTAINABLE CITIES AND SOCIETY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

M. Premalatha et al.

IONICS (2016)

添加到收藏夹

Article Energy & Fuels

Design principles for electrolytes and interfaces for stable lithium-metal batteries

Mukul D. Tikekar et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Mesoporous Carbon Inter layers with Tailored Pore Volume as Polysulfide Reservoir for High-Energy Lithium-Sulfur Batteries

Juan Balach et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism

Fei Ding et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

添加到收藏夹

Article Chemistry, Physical

A free-standing, self-assembly ternary membrane with high conductivity for lithium-ion batteries

Ting Feng et al.

SOLID STATE IONICS (2012)

添加到收藏夹

Article Chemistry, Analytical

FTIR studies of PEMA/PVdF-HFP blend polymer electrolyte system incorporated with LiCF3SO3 salt

L. N. Sim et al.

VIBRATIONAL SPECTROSCOPY (2012)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives

Eliana Quartarone et al.

CHEMICAL SOCIETY REVIEWS (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.