Dual modification of P2-Na0.67Ni0.33Mn0.67O2 by Co doping and Al1.8Co0.2O3 coating

Article Materials Science, Ceramics

Synthesis of Na ion-electron mixed conductor Na3Zr2Si2PO12 by doping with transition metal elements (Co, Fe, Ni)

Jing Luo et al.

Summary: NASICON solid electrolyte Na3Zr2Si2PO12 can be used as cladding materials for cathodes to improve battery cycle stability. The electronic conductivity of NZSP is improved by doping with Co, while the ionic conductivity remains stable.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Structural Evolution in P2-type Layered Oxide Cathode Materials for Sodium-Ion Batteries

Zhengbo Liu et al.

Summary: This Minireview summarizes the phase transitions and structural evolution of P2-type layered oxide cathodes during charge/discharge cycles, aiming to assist researchers in designing cathodes with lower strain.

CHEMNANOMAT (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecular engineering of s-triazine and its derivatives applied in surface modification strategy for enhancing photoelectric performance of all-inorganic perovskites

Yifei Yue et al.

Summary: This study develops an effective modification strategy based on molecular engineering of s-triazine and its derivatives to improve the photoelectric performance of all-inorganic perovskites (AIP) for the first time.

CHINESE CHEMICAL LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Suppressing the P2-O2 phase transformation and Na+/vacancy ordering of high-voltage manganese-based P2-type cathode by cationic codoping

Feng Li et al.

Summary: In this study, a novel dual cationic codoping strategy using Co and Li doping was proposed to improve the structural stability and performance of manganese-based P2-type oxides as cathodes for sodium-ion batteries (SIBs). Experimental results showed that the Li/Co codoped P2-type oxide exhibited outstanding cycling stability and high-rate capability. Furthermore, the full-cell composed of the codoped P2-type positive and hard carbon negative demonstrated high energy density, good lifespan, and high-rate property.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Electrochemistry

Precipitate-stabilized surface enabling high-performance Na0.67Ni0.33-xMn0.67ZnxO2 for sodium-ion battery

Kuan Wang et al.

Summary: The introduction of high-density dopant-enriched precipitates enhances the surface stability of P2 layered cathodes, effectively suppressing surface cracking and corrosion issues, improving surface/interface stability, and increasing the cycling stability of P2 layered cathodes for sodium-ion batteries.

ESCIENCE (2022)

添加到收藏夹

Article Electrochemistry

Stable Ni-rich layered oxide cathode for sulfide-based all-solid-state lithium battery

Yue Wang et al.

Summary: A sulfidation strategy is used to obtain a new type of Ni-rich cathode (NCM88-S) with an ultrathin surface layer, which significantly reduces interfacial side reactions/resistance and improves interfacial stability. The resulting NCM88-S/Li6PS5Cl/Li4Ti5O12 all-solid-state lithium-ion battery shows superior performance.

ESCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Electrochemical performances of P2-Na2/3Ni1/3Mn2/3O2 doped with Li and Mg for high cycle stability

Yu Chen et al.

Summary: Sodium-ion batteries have great potential in grid energy storage due to abundant sodium resources. The electrochemical performances are mainly determined by cathode materials, with P2-Na2/3Ni1/3Mn2/3O2 showing high capacity and stability when using Na2CO3 as Na source. Doping with Li and Mg can significantly improve cycle stability, but initial discharge capacity is reduced.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Multiple effects of Mg1-xNixO coating on P2-type Na0.67Ni0.33Mn0.67O2 to generate highly stable cathodes for sodium-ion batteries

Hyeongwoo Kim et al.

Summary: P2-type NaNiMnO2 (NNMO) is a high-energy and high-voltage cathode material in sodium-ion batteries, but surface degradation effects limit its electrochemical stability. By applying Mg1-xNixO (MgNiO) as a coating, cycling stability and rate capability of NNMO can be significantly improved.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Chemistry, Physical

Spatial and Temporal Analysis of Sodium-Ion Batteries

Dewen Hou et al.

Summary: This Review summarizes significant recent progress in SIBs exploiting in situ and operando techniques based on X-ray and electron analyses at different time and length scales. Through the combination of spectroscopy, imaging, and diffraction, local and global changes in SIBs can be elucidated for improving materials design. The fundamental principles and state-of-the-art capabilities of different techniques are presented, followed by elaborative discussions of major challenges and perspectives.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Sodium superionic conductor NaTi2(PO4)3 surface layer modified P2-type Na2/3Ni1/3Mn2/3O2 as high-performance cathode for sodium-ion batteries

Haiming Li et al.

Summary: The study shows that surface modification of NNMO with NTP solid-state electrolyte can enhance the structural and electrochemical stability of the electrode, improve Na+ diffusion rate and rate capability, thus increasing cycling stability. This coating strategy also has the potential to significantly impact the construction of other cathode materials for sodium-ion batteries.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Carbon coated NaLi0.2Mn0.8O2 as a superb cathode material for sodium ion batteries

Ngo Quy Quyen et al.

Summary: Adding carbon to the surface of P2-type sodium-lithium-manganese oxide material improves its rate capacity and specific capacity, making the carbon-coated NLM@C material a promising cathode material for sodium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of amorphous SeP2/C composite by plasma assisted ball milling for high-performance anode materials of lithium and sodium-ion batteries

Cheng Lin et al.

Summary: The SeP2/C composite synthesized by plasma-assisted milling method shows excellent lithium and sodium storage performances, with fast ion transfer kinetics and volume expansion inhibition mechanism, indicating great potential as a new type of anode material.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advanced cobalt-free cathode materials for sodium-ion batteries

Shiyong Chu et al.

Summary: This review comprehensively summarizes recent advances in high-performance cobalt-free cathode materials for advanced SIBs, analyzing the conflicts of structural/electrochemical stability with intrinsic insufficiencies of cobalt-free cathode materials, and discussing strategies for constructing stable cobalt-free cathode materials.

CHEMICAL SOCIETY REVIEWS (2021)

添加到收藏夹

Review Electrochemistry

Spinel/Post-spinel engineering on layered oxide cathodes for sodium-ion batteries

Yan-Fang Zhu et al.

Summary: This review highlights recent advances in spinel engineering on layered oxide cathodes for enhancing Na+ transport kinetics and providing structural stability to achieve high-performance SIBs.

ESCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mitigation of Jahn-Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution

Yanchen Liu et al.

Summary: Introducing lithium ions to partially substitute manganese ions in layered manganese-based oxides leads to a distorted structure which enhances the performance of cathode materials in sodium-ion batteries. This strategy improves specific capacity, cycling stability, and rate capability in SIBs.

CHEMICAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Progress of P2-Type Layered Transition-Metal Oxide Cathodes for Sodium-Ion Batteries

Liu Zhengbo et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Atomic layer deposition of Al2O3 on P2-Na0.5Mn0.5Co0.5O2 as interfacial layer for high power sodium-ion batteries

Hari Vignesh Ramasamy et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Vitalization of P2-Na2/3Ni1/3Mn2/3O2 at high-voltage cyclability via combined structural modulation for sodium-ion batteries

Yangyang Huang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Construction nasicon-type NaTi2(PO4)3 nanoshell on the surface of P2-type Na0 .67Co0.2Mn0.8O2 cathode for superior room/low-temperature sodium storage

Yong Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Environmental

Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67-xTixO2 cathode materials for high-performance sodium-ion batteries

Ke Tang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries

Qiang Xie et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Al2O3 coated Na0.44MnO2 as high-voltage cathode for sodium ion batteries

Yue Zhang et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Review Chemistry, Physical

Research and development of advanced battery materials in China

Yaxiang Lu et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A high energy-density P2-Na2/3[Ni0.3Co0.1Mn0.6]O2 cathode with mitigated P2-O2 transition for sodium-ion batteries

Peiyu Hou et al.

NANOSCALE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nature of the Z-phase in layered Na-ion battery cathodes

James W. Somerville et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Na+/Vacancy Disordered P2-Na0.67Co1-xTixO2: High-Energy and High-Power Cathode Materials for Sodium Ion Batteries

Seok Mun Kang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

A high-capacity P2 Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries with oxygen activity

Tim Risthaus et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Novel P2-type concentration-gradient Na0.67Ni0.167Co0.167Mn0.67O2 modified by Mn-rich surface as cathode material for sodium ion batteries

Shuo Bao et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Habit plane-driven P2-type manganese-based layered oxide as long cycling cathode for Na-ion batteries

Rui Luo et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Rate Capability and Cycle Performance of Titanium-Substituted P2-Type Na0.67Fe0.5Mn0.5O2 as a Cathode for Sodium-Ion Batteries

Joon-Ki Park et al.

ACS OMEGA (2018)

添加到收藏夹

Article Chemistry, Physical

P2-type Na0.67Ni0.33-x Cu x Mn0.67O2 as new high-voltage cathode materials for sodium-ion batteries

Sen Chen et al.

IONICS (2017)

添加到收藏夹

Article Chemistry, Physical

Efficient Method of Designing Stable Layered Cathode Material for Sodium Ion Batteries Using Aluminum Doping

Hari Vignesh Ramasamy et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

New Nanoconfined Galvanic Replacement Synthesis of Hollow Sb@C Yolk-Shell Spheres Constituting a Stable Anode for High-Rate Li/Na-Ion Batteries

Jun Liu et al.

NANO LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ilmenite Nanotubes for High Stability and High Rate Sodium-Ion Battery Anodes

Litao Yu et al.

ACS NANO (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Unveiling the Role of Co in Improving the High-Rate Capability and Cycling Performance of Layered Na0.7Mn0.7Ni0.3-xCoxO2 Cathode Materials for Sodium-Ion Batteries

Zheng-Yao Li et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

New insights into designing high-rate performance cathode materials for sodium ion batteries by enlarging the slab-spacing of the Na-ion diffusion layer

Zheng-Yao Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: The capacity decay mechanism and Al2O3 surface modification

Yihang Liu et al.

NANO ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A quinary layer transition metal oxide of NaNi1/4Co1/4Fe1/4Mn1/8Ti1/8O2 as a high-rate-capability and long-cycle-life cathode material for rechargeable sodium ion batteries

Ji-Li Yue et al.

CHEMICAL COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Stable Na-2/3(Mn0.54Ni0.13Co0.13)O-2 Cathode Modified by Atomic Layer Deposition for Sodium-Ion Batteries

Karthikeyan Kaliyappan et al.

CHEMSUSCHEM (2015)

添加到收藏夹

Article Chemistry, Physical

Hydrogen peroxide assisted synthesis of LiNi1/3Co1/3Mn1/3O2 as high-performance cathode for lithium-ion batteries

Chaohong Lin et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Review Electrochemistry

Review-Manganese-Based P2-Type Transition Metal Oxides as Sodium-Ion Battery Cathode Materials

Raphaele J. Clement et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Air-Stable Copper-Based P2-Na7/9Cu2/9Fe1/9Mn2/3O2 as a New Positive Electrode Material for Sodium-Ion Batteries

Yunming Li et al.

ADVANCED SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Unraveling the storage mechanism in organic carbonyl electrodes for sodium-ion batteries

Xiaoyan Wu et al.

SCIENCE ADVANCES (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layered NaxMnO2+z in Sodium Ion Batteries-Influence of Morphology on Cycle Performance

Nicolas Bucher et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

添加到收藏夹

Article Electrochemistry

P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery

Dingding Yuan et al.

ELECTROCHIMICA ACTA (2014)

添加到收藏夹

Article Electrochemistry

Carbon coated Na3V2(PO4)(3) as novel electrode material for sodium ion batteries

Zelang Jian et al.

ELECTROCHEMISTRY COMMUNICATIONS (2012)

添加到收藏夹

Review Multidisciplinary Sciences

Advanced technology paths to global climate stability: Energy for a greenhouse planet

MI Hoffert et al.

SCIENCE (2002)

添加到收藏夹

Dual modification of P2-Na0.67Ni0.33Mn0.67O2 by Co doping and Al1.8Co0.2O3 coating

相关参考文献

导出引文

分享论文