4.8 Article

Engineered yeast for the efficient hydrolysis of polylactic acid

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Agricultural Engineering

Bioaugmentation with a defined bacterial consortium: A key to degrade high molecular weight polylactic acid during traditional composting

Avnish Nitin Mistry et al.

Summary: This study aimed to degrade high molecular weight PLA films during traditional composting by adding a PLA-degrading bacterial consortium (EAc). With EAc bioaugmentation, PLA films had complete disintegration in 35 days, 77-82% molecular weight reduction in 16 days, and higher CO2 liberation and mineralization compared to non-bioaugmented composting. The bacterial community analysis showed that EAc bioaugmentation increased the relative abundance of the polymer degrader Schlegelella and interacted positively with beneficial indigenous microbes. The bioaugmentation also decreased compost phytotoxicity.

BIORESOURCE TECHNOLOGY (2023)

Article Green & Sustainable Science & Technology

Triticale and sorghum as feedstock for bioethanol production via consolidated bioprocessing

Sarel J. M. Malherbe et al.

Summary: Corn starch is the main feedstock for bioethanol production, but alternative cereals like triticale and sorghum grown on marginal farming land and used as animal feed have been evaluated due to concerns about food security. This study used a consolidated bio-processing approach to assess the potential of triticale and sorghum grains as bioethanol feedstocks and found that an amylolytic strain achieved high ethanol conversion efficiencies from both substrates. The study also showed that supplementation with specific enzymes can reduce fermentation time and different fermentation configurations may be required for each substrate.

RENEWABLE ENERGY (2023)

Article Agricultural Engineering

Biodegradation of bioplastics under aerobic and anaerobic aqueous conditions: Kinetics, carbon fate and particle size effect

Octavio Garcia-Depraect et al.

Summary: This study compared the biodegradation of various bioplastics in different aerobic and anaerobic conditions, showing that particle size significantly affects the degradation rate. The increase in biomass accounted for a varying proportion of the total carbon, highlighting the importance of analyzing biodegradation kinetics and carbon fate in improving the development and testing of biodegradable materials.

BIORESOURCE TECHNOLOGY (2022)

Review Engineering, Environmental

A Critical Review of the Performance and Soil Biodegradability Profiles of Biobased Natural and Chemically Synthesized Polymers in Industrial Applications

Preeti Tyagi et al.

Summary: This review explores biobased polymers for industrial applications, their end fate, and most importantly, origin and key aspects enabling soil biodegradation. The physicochemical properties of biobased synthetic and natural polymers and the primary factors governing degradation are explored. Factors impacting ultraviolet (UV) stability of biopolymers have been described including methods to enhance photoresistance and impact on biodegradation. It discusses end-fate of biopolymers in soil and impact of residues on soil health. A limited number of studies examine side effects (e.g., microbial toxicity) from soil biodegradation of composites and biopolymers. Currently available standards for biodegradation and composting have been described with limitations and scope for improvements. Finally, design considerations and implications for sustainable polymers used, under consideration, and to be considered within the context of a rational biodegradable strategy are elaborated.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Review Nanoscience & Nanotechnology

Bioplastics for a circular economy

Jan-Georg Rosenboom et al.

Summary: Bioplastics have the potential to contribute to a more sustainable and circular economy by reducing carbon footprint and offering advantageous material properties. However, they also face challenges such as negative agricultural impacts, competition with food production, unclear end-of-life management, and higher costs. Emerging chemical and biological methods can enable the upcycling of plastic waste into higher-quality materials. Standardization and guidelines are needed to guide purchasing choices, and clear regulations and financial incentives are essential for the large-scale adoption of bioplastics in a truly sustainable manner.

NATURE REVIEWS MATERIALS (2022)

Article Agricultural Engineering

Assessing the anaerobic degradability and the potential recovery of biomethane from different biodegradable bioplastics in a full-scale approach

Mirko Cucina et al.

Summary: The aim of this study was to evaluate the anaerobic degradability and potential recovery of biomethane from different bioplastics. The results showed that certain polylactic acid-based items can degrade completely and contribute positively to biomethane production. Starch-based items showed a faster degradation of the starch component compared to the polyester component. Anaerobic digestion and/or anaerobic digestion coupled to digestate composting may be the best strategy for disposing of these wastes while meeting the principles of Circular Economy.

BIORESOURCE TECHNOLOGY (2022)

Article Agricultural Engineering

Anaerobic digestion and aerobic composting of rigid biopolymers in bio-waste treatment: fate and effects on the final compost

Francesca Bandini et al.

Summary: This study evaluated the degradability of polylactic acid (PLA) and starch-based bioplastics (SBB) under industrial conditions. The results showed that the disintegration of these bioplastics did not meet the standard requirements, with residues found in compost. Phytotoxicity tests indicated that PLA elutriate had the lowest Germination Index, while SBB had a potential negative effect on soil fauna. Further investigation is needed to understand the fate of these materials in industrial conditions and assess the effects of residues in compost.

BIORESOURCE TECHNOLOGY (2022)

Article Materials Science, Characterization & Testing

Future trends of plastic bottle recycling: Compatibilization of PET and PLA

D. Gere et al.

POLYMER TESTING (2020)

Article Multidisciplinary Sciences

An engineered PET depolymerase to break down and recycle plastic bottles

V. Tournier et al.

NATURE (2020)

Article Engineering, Environmental

Life cycle assessment of recycling options for polylactic acid

Daniel Maga et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Article Microbiology

The Degradative Capabilities of New Amycolatopsis Isolates on Polylactic Acid

Francesca Decorosi et al.

MICROORGANISMS (2019)

Article Biochemistry & Molecular Biology

Stabilizing Leaf and Branch Compost Cutinase (LCC) with Glycosylation: Mechanism and Effect on PET Hydrolysis

Abhijit N. Shirke et al.

BIOCHEMISTRY (2018)

Article Green & Sustainable Science & Technology

Impact of Bio-Based Plastics on Current Recycling of Plastics

Luc Alaerts et al.

SUSTAINABILITY (2018)

Review Engineering, Environmental

Anaerobic degradation of bioplastics: A review

Veronika Batori et al.

WASTE MANAGEMENT (2018)

Review Microbiology

Comparison of Yeasts as Hosts for Recombinant Protein Production

Antonio Milton Vieira Gomes et al.

MICROORGANISMS (2018)

Article Engineering, Environmental

Optimization of Poly(DL-Lactic Acid) Degradation and Evaluation of Biological Re-polymerization

Anupan Youngpreda et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)

Review Biotechnology & Applied Microbiology

New advances in the biodegradation of Poly(lactic) acid

Xiang Qi et al.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2017)

Review Polymer Science

Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review

Mehlika Karamanlioglu et al.

POLYMER DEGRADATION AND STABILITY (2017)

Article Polymer Science

Studies on the thermal and mechanical behavior of PLA-PET blends

Andrew R. McLauchlin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Article Engineering, Environmental

Life Cycle Assessment of Poly(Lactic Acid) (PLA): Comparison Between Chemical Recycling, Mechanical Recycling and Composting

Marina F. Cosate de Andrade et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2016)

Article Polymer Science

Comparative assessment of miscibility and degradability on PET/PLA and PET/chitosan blends

A. M. Torres-Huerta et al.

EUROPEAN POLYMER JOURNAL (2014)

Article Biotechnology & Applied Microbiology

Characterization of poly(L-lactide)-degrading enzyme produced by thermophilic filamentous bacteria Laceyella sacchari LP175

Srisuda Hanphakphoom et al.

JOURNAL OF GENERAL AND APPLIED MICROBIOLOGY (2014)

Article Biotechnology & Applied Microbiology

Development of fermentation process for PLA-degrading enzyme production by a new thermophilic Actinomadura sp T16-1

Sukhumaporn Sukkhum et al.

BIOTECHNOLOGY AND BIOPROCESS ENGINEERING (2009)

Article Biotechnology & Applied Microbiology

Production of poly(L-lactide)-degrading enzyme by Amycolatopsis orientalis for biological recycling of poly(L-lactide)

Amnat Jarerat et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2006)

Article Biotechnology & Applied Microbiology

Construction of cellobiose-growing and fermenting Saccharomyces cerevisiae strains

R van Rooyen et al.

JOURNAL OF BIOTECHNOLOGY (2005)

Article Biotechnology & Applied Microbiology

Cutinase-like enzyme from the yeast Cryptococcus sp strain S-2 hydrolyzes polylactic acid and other biodegradable plastics

K Masaki et al.

APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2005)

Article Biotechnology & Applied Microbiology

Purification and characterization of an extracellular poly(L-lactic acid) depolymerase from a soil isolate, Amycolatopsis sp strain K104-1

K Nakamura et al.

APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2001)