相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。PVA fibre reinforced high-strength cementitious composite for 3D printing: Mechanical properties and durability
Xiaoyan Sun et al.
ADDITIVE MANUFACTURING (2022)
Strength and erosion resistance of mudbrick as an alternative local material for Australia's Northern Territory remote housing
Varuna Sumanasena et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2022)
Improving the Performances of a Mortar for 3D Printing by Mineral Modifiers
Valery Lesovik et al.
BUILDINGS (2022)
Foam 3D printing for construction: A review of applications, materials, and processes
Patrick Bedarf et al.
AUTOMATION IN CONSTRUCTION (2021)
Feasibility of glass/basalt fiber reinforced seawater coral sand mortar for 3D printing
L. G. Li et al.
ADDITIVE MANUFACTURING (2021)
Hardened properties and durability of large-scale 3D printed cement-based materials
Yu Zhang et al.
MATERIALS AND STRUCTURES (2021)
A systematic review and analysis of the viability of 3D-printed construction in remote environments
Steven J. Schuldt et al.
AUTOMATION IN CONSTRUCTION (2021)
SaltBlock as a 3D printed sustainable construction material in hot arid climates
Deena El-Mahdy et al.
JOURNAL OF BUILDING ENGINEERING (2021)
The effect of restrained early age shrinkage on the interlayer bond and durability of 3D printed concrete
G. M. Moelich et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Sustainability assessment, potentials and challenges of 3D printed concrete structures: A systematic review for built environmental applications
Shoukat Alim Khan et al.
JOURNAL OF CLEANER PRODUCTION (2021)
A critical review of 3D printing in construction: benefits, challenges, and risks
S. El-Sayegh et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Enhancing durability of 3D printed polymer structures by metallization
Arash Afshar et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
The Viability and Simplicity of 3D-Printed Construction: A Military Case Study
Jenee Jagoda et al.
INFRASTRUCTURES (2020)
3D printed medical parts with different materials using additive manufacturing
Abid Haleem et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2020)
Criteria development for sustainable construction manufacturing in Construction Industry 4.0 Theoretical and laboratory investigations
Faham Tahmasebinia et al.
CONSTRUCTION INNOVATION-ENGLAND (2020)
Aboriginal yards in remote Australia: Adapting landscapes for indigenous housing
Timothy O'Rourke et al.
LANDSCAPE AND URBAN PLANNING (2019)
Printability, accuracy and strength of geopolymer made using powder-based 3D printing for construction applications
Ming Xia et al.
AUTOMATION IN CONSTRUCTION (2019)
Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates
Joseph Ingaglio et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Low-carbon development in remote Indigenous communities: Applying a community-directed model to support endogenous assets and aspirations
J. Stewart et al.
ENVIRONMENTAL SCIENCE & POLICY (2019)
A Study into the Effect of Different Nozzles Shapes and Fibre-Reinforcement in 3D Printed Mortar
Pshtiwan Shakor et al.
MATERIALS (2019)
Industry 4.0 for the Construction Industry-How Ready Is the Industry?
Raihan Maskuriy et al.
APPLIED SCIENCES-BASEL (2019)
Print time vs. elapsed time: A temporal analysis of a continuous printing operation for additive constructed concrete
Brandy N. Diggs-McGee et al.
ADDITIVE MANUFACTURING (2019)
Fabrication and durability testing of a 3D printed facade for desert climates
Giulia Grassi et al.
ADDITIVE MANUFACTURING (2019)
State-of-the-art of 3D printing technology of cementitious material-An emerging technique for construction
GuoWei Ma et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
Applications of additive manufacturing in the construction industry - A forward-looking review
Daniel Delgado Camacho et al.
AUTOMATION IN CONSTRUCTION (2018)
Perspectives on a BIM-integrated software platform for robotic construction through Contour Crafting
Omid Davtalab et al.
AUTOMATION IN CONSTRUCTION (2018)
Additive manufacturing technology and its implementation in construction as an eco-innovative solution
Seyed Hamidreza Ghaffar et al.
AUTOMATION IN CONSTRUCTION (2018)
Construction automation: Research areas, industry concerns and suggestions for advancement
Qian Chen et al.
AUTOMATION IN CONSTRUCTION (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
Karen L. Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing of earth-based materials: Processing aspects
A. Perrot et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A review of 3D concrete printing systems and materials properties: current status and future research prospects
Suvash Chandra Paul et al.
RAPID PROTOTYPING JOURNAL (2018)
Large-scale 3D printing by a team of mobile robots
Xu Zhang et al.
AUTOMATION IN CONSTRUCTION (2018)
Particle-bed 3D printing in concrete construction - Possibilities and challenges
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2018)
Evaluation of workability parameters in 3D printing concrete
M. Papachristoforou et al.
1ST INTERNATIONAL CONFERENCE OF THE GREEK SOCIETY OF EXPERIMENTAL MECHANICS OF MATERIALS (GSEMM) (2018)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Fluctuations in money availability within an income cycle impacts diet quality of remote Indigenous Australians
Thomas P. Wycherley et al.
PUBLIC HEALTH NUTRITION (2017)
Housing and Overcrowding in Remote Indigenous Communities: Impacts and Solutions from a Holistic Perspective
Petra T. Buergelt et al.
IMPROVING RESIDENTIAL ENERGY EFFICIENCY INTERNATIONAL CONFERENCE, IREE 2017 (2017)
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing
F. Craveiro et al.
AUTOMATION IN CONSTRUCTION (2017)
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Mohsen Attaran
BUSINESS HORIZONS (2017)
Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing
Pshtiwan Shakor et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Toward site-specific and self-sufficient robotic fabrication on architectural scales
Steven J. Keating et al.
SCIENCE ROBOTICS (2017)
Additive construction: State-of-the-art, challenges and opportunities
Nathalie Labonnote et al.
AUTOMATION IN CONSTRUCTION (2016)
A critical review of the use of 3-D printing in the construction industry
Peng Wu et al.
AUTOMATION IN CONSTRUCTION (2016)
A cross-sectional survey of environmental health in remote Aboriginal communities in Western Australia
S. M. Melody et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL HEALTH RESEARCH (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
The future of construction automation: Technological disruption and the upcoming ubiquity of robotics
Thomas Bock
AUTOMATION IN CONSTRUCTION (2015)
Mechanical properties of structures 3D printed with cementitious powders
Peng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
“Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing”, 2nd Edition
Jonathan Edgar et al.
Johnson Matthey Technology Review (2015)
Geopolymer foam concrete: An emerging material for sustainable construction
Zuhua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effects of structural fibers on bonding mechanism changes in interface between GFRP bar and concrete
B. Kim et al.
COMPOSITES PART B-ENGINEERING (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
The dominant erosion processes supplying fine sediment to three major rivers in tropical Australia, the Daly (NT), Mitchell (Qld) and Flinders (Qld) Rivers
Gary G. Caitcheon et al.
GEOMORPHOLOGY (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
'Why isn't it solved?': Factors affecting improvements in housing outcomes in remote Indigenous communities in Australia
John Fien et al.
HABITAT INTERNATIONAL (2012)
BIM- and 4D-based integrated solution of analysis and management for conflicts and structural safety problems during construction: 1. Principles and methodologies
J. P. Zhang et al.
AUTOMATION IN CONSTRUCTION (2011)
Greening Project Management Practices for Sustainable Construction
Lauren Bradley Robichaud et al.
JOURNAL OF MANAGEMENT IN ENGINEERING (2011)
Metal filled resin for stereolithography metal part
P. J. Bartolo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)