☆ 4.7 Article

A novel thermal management system for lithium-ion battery modules combining direct liquid-cooling with forced air-cooling

APPLIED THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system

Hasan Najafi Khaboshan et al.

Summary: This study aims to design a high-performance battery thermal management system utilizing phase change material, metal foam, and fins to keep the lithium-ion battery temperature at the lowest level under discharging with a 3C current rate. Four different cases of BTMS and five different fin shapes are designed and analyzed using a two-equation local non-equilibrium thermal model. The numerical results show that the optimum BTMS can reduce the battery surface temperature by 3K and has a maximum delay of about 470s in PCM melting.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Internal Heating Strategy for Lithium-Ion Batteries Without Lithium Plating Based on Self-Adaptive Alternating Current Pulse

Wei Li et al.

Summary: AC pulse heating is a low-energy and high-efficiency preheating method for lithium-ion batteries. In this study, a dual RC model and a thermal model were used to predict the battery temperature and negative electrode potential. The upper bound of heating current (UBHC) was determined by the criteria of negative electrode potential reaching 0 V, indicating lithium plating. The proposed self-adaptive AC pulse heating strategy improved the heating efficiency compared to constant amplitude pulse heating.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2023)

添加到收藏夹

Article Thermodynamics

Feasibility study of a novel oil-immersed battery cooling system: Experiments and theoretical analysis

Jiahao Liu et al.

Summary: This paper investigates the feasibility of using transformer oil to develop an oil-immersed battery thermal management system. Through model-scale experiments and theoretical analysis, it is found that stationary transformer oil can effectively cool the battery and reduce temperature inhomogeneity. Increasing oil flow rate can improve the cooling performance, but excessive flow rate will increase power consumption.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Experimental study on the hybrid carbon based phase change materials for thermal management performance of lithium-ion battery module

Mingyi Chen et al.

Summary: The thermal conductivity of phase change material (PCM) is improved by adding hybrid thermal conductivity filler, resulting in better cooling effect in lithium-ion battery (LIB) thermal management. The addition of 1% few-layer graphene and 2% graphite nanoplatelet to the PCM composite materials can effectively decrease the maximal temperature of the battery module under different conditions.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

An energy-saving battery thermal management strategy coupling tubular phase-change-material with dynamic liquid cooling under different ambient temperatures

Jingwen Wng et al.

Summary: This study investigates the thermal behaviors of liquid cooling and phase-change material cooling in advanced battery thermal management systems for electric vehicles. The results show the superior cooling effect of a thermal management module coupling the two methods. Additionally, a dynamic liquid cooling mode is proposed to reduce energy consumption.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A review on recent key technologies of lithium-ion battery thermal management: External cooling systems

Marwa Mahmoud Hamed et al.

Summary: Lithium-ion batteries are widely used for energy storage due to their high energy density, efficiency, capacity, and long-life cycle. However, abnormal temperature increment in the batteries can lead to performance degradation and safety issues. Therefore, an appropriate battery thermal management system is required to reduce the maximum temperature of the battery. This article provides a comprehensive review of recent research on external thermal management strategies for lithium-ion batteries, aiming to enhance understanding of key technologies and provide practical guidelines for their application.

RESULTS IN ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Enhanced optimization algorithm for the structural design of an air-cooled battery pack considering battery lifespan and consistency

Yi Xie et al.

Summary: This study proposes a method for optimizing the air channels in a scooter battery pack and demonstrates its ability to improve the thermal performance, SOC distribution, and lifespan of the battery pack through experiments.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Thermodynamics

Investigation of thermal runaway propagation characteristics of lithium-ion battery modules under different trigger modes

Xin Lai et al.

Summary: This study investigates and compares the TRP behavior of lithium-ion battery modules under three typical triggering modes, with findings that differences in TRP time and triggering temperature are significant in the early stages but diminish later on, and that energy flow distribution shows a large portion of energy used for self-heating and emitted during cell explosions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

A novel sandwich structured phase change material with well impact energy absorption performance for Li-ion battery application

Yafang Zhang et al.

Summary: This study effectively addresses the safety issues of thermal runaway in batteries induced by rapid charging/discharging and collision by designing phase change materials (PCM) with collision energy absorption properties. The results demonstrate that applying PCM to batteries significantly reduces temperature and improves temperature distribution, while also providing good impact energy absorption performance to protect the battery from collisions. Additionally, a finite element model was developed to analyze the impact process of the battery, showing good agreement with experimental results and providing a new approach to design PCM for battery applications.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

Battery thermal management system based on the forced-air convection: A review

Peng Qin et al.

Summary: This paper reviews the developments on the application of forced-air convection into BTMS and summarizes the main optimization routes which include pure forced-air convection, combination with phase change material and heat pipe, and outlooks for future development.

ETRANSPORTATION (2021)

添加到收藏夹

Article Energy & Fuels

Facile preparation of flexible eicosane/SWCNTs phase change films via colloid aggregation for thermal energy storage

Renjie Chen et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance predictions for an HFE-7000 direct flow boiling cooled battery thermal management system for electric vehicles

Yan-Feng Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling

Wen Yang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Review Chemistry, Physical

Mitigating Thermal Runaway of Lithium-Ion Batteries

Xuning Feng et al.

JOULE (2020)

添加到收藏夹

Review Thermodynamics

A critical review of battery thermal performance and liquid based battery thermal management

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Review Energy & Fuels

A review on various temperature-indication methods for Li-ion batteries

L. H. J. Raijmakers et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Numerical study on a water cooling system for prismatic LiFePO4 batteries at abused operating conditions

Xinhai Xu et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger

Lei Sheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Review Energy & Fuels

A review of novel thermal management systems for batteries

Maan Al-Zareer et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

A more realistic approach to electric vehicle contribution to greenhouse gas emissions in the city

Roberto Alvarez Fernandez

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Review Chemistry, Physical

Li plating as unwanted side reaction in commercial Li-ion cells - A review

Thomas Waldmann et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Thermodynamics

Numerical simulation of flow and heat transfer in composite PCM on the basis of two different models of open-cell metal foam skeletons

Zhuqian Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Energy & Fuels

Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system

Suman Basu et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite

Abid Hussain et al.

ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles

Jiateng Zhao et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Thermal management of a Li-ion battery using carbon fiber-PCM composites

A. Babapoor et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements

Naixing Yang et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of thermal behaviors in lithium-ion battery stack discharge

Rui Liu et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies

Tao Wang et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles

L. H. Saw et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Chemistry, Physical

Battery cell arrangement and heat transfer fluid effects on the parasitic power consumption and the cell temperature distribution in a hybrid electric vehicle

Sungjin Park et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity

Rajib Mahamud et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Design optimization of electric vehicle battery cooling plates for thermal performance

Anthony Jarrett et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Energy analysis of electric vehicles using batteries or fuel cells through well-to-wheel driving cycle simulations

Stefano Campanari et al.

JOURNAL OF POWER SOURCES (2009)

添加到收藏夹

Article Chemistry, Physical

Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution

Rami Sabbah et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Battery thermal models for hybrid vehicle simulations

AA Pesaran

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.