☆ 4.7 Article

Femtosecond laser surface modification of 4H-SiC improves machinability

APPLIED SURFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic

Zhelun Ma et al.

Summary: In this study, a predictive model for grinding force during laser-assisted grinding (LAG) process is established, taking into account the mechanical properties of the material, micro interaction between grit and material, and random shapes and distributions of abrasive grits. The model explains the mechanism of reduction in grinding force during LAG. Experimental validation and investigation of grinding parameters show that optimal parameters can significantly reduce grinding force and improve surface integrity.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

300 fs pulsed laser ablation of Al2O3 ceramic and introduction of a predictive model

Jodok Weixler et al.

Summary: In this study, a calculation routine for predicting the ablation topography considering the angle of incidence and pulse-by-pulse evolution of the ablated surface is presented. The laser processing of Al2O3 ceramic is investigated, and the threshold fluence is compared for different process configurations, showing that lower scanspeed leads to a higher removal rate. The method's accuracy is evaluated through an ablation experiment.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

All laser-based fabrication of microchannel heat sink

Haoyu Zhou et al.

Summary: In this study, an all-laser fabrication method is proposed to fabricate a microfluidic heat sink for silicon devices. The microchannels are engraved on a silicon wafer using lasers, and inlet/outlet holes are drilled on a quartz glass cover. The heat generated by the device is successfully removed by the fabricated microfluidic channel.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Chemistry, Physical

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Gaopan Chen et al.

Summary: This study improved the ultra-precision machining of silicon carbide Si-face through nanosecond laser modulation, leading to increased surface smoothness and removal efficiency. The increase in oxygen content and formation of oxide coating played a positive role in reducing scratches and other issues during polishing.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Femtosecond laser modification of silicon carbide substrates and its influence on CMP process

Xiaozhu Xie et al.

Summary: This paper focuses on enhancing the efficiency of chemical mechanical polishing (CMP) of hard-to-process SiC substrates by irradiating them with femtosecond laser. The effects of different laser processing parameters on the surface morphology of SiC were discussed, along with the influences of surrounding conditions. It was found that the formation of Si-O compound on the laser-irradiated SiC surfaces and the creation of uniform periodic ripple structures can improve surface flatness.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Industrial

Laser microplasma as a spot tool for glass processing: Focusing conditions

Vladimir S. Rymkevich et al.

Summary: This study discusses the laser-based surface nano- and micropmcessing of optical materials, focusing on improving processing quality and repeatability of the LIMP method. Experimental methodologies and calculations were used to analyze the plasma plume expansion and laser beam distortion, highlighting the importance of experimental conditions for robust, low-cost implementation in the industry.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

MD simulation of two-temperature model in ion irradiation of 3C-SiC: Effects of electronic and nuclear stopping coupling, ion energy and crystal orientation

Jintong Wu et al.

Summary: The numerical study investigated swift ion induced effects in crystalline 3C silicon carbide by the two-temperature model, revealing that only a minority of defects formed in the system during the ionization dominance stage, while a dramatic increase of damage occurred in the nuclear stopping stage. Sparse atomic arrangement perpendicular to the implantation direction reduces the response of the atomic subsystem during low-energy ion implantation.

JOURNAL OF NUCLEAR MATERIALS (2021)

添加到收藏夹

Article Optics

Physical study of spatter and melt pool dynamics during millisecond laser metals drilling

Tingzhong Zhang et al.

Summary: Studying spatter dynamics during laser drilling using shadow mapping and simulating laser material processing with COMSOL software are important methods to understand the quality of processed materials. The results can explain material properties changes during laser processing and provide theoretical references for optimizing processing parameters.

OPTICS COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Centimeter-scale low-damage micromachining on single-crystal 4H-SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Jiangyou Long et al.

Summary: This study achieved centimeter-scale low-damage micromachining on single-crystal 4H-SiC substrates using a diffractive optical element, while systematically investigating the effects of processing parameters on surface morphology and composition. The distribution of subsurface defects caused by fs laser processing was examined through chemical mechanical polishing.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Optics

Maxwell Meets Marangoni-A Review of Theories on Laser-Induced Periodic Surface Structures

Joern Bonse et al.

LASER & PHOTONICS REVIEWS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Numerical and experimental investigation on formation of surface structures in laser remelting for additive-manufactured Inconel 718

A. Temmler et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Highly efficient planarization of sliced 4H-SiC (0001) wafer by slurryless electrochemical mechanical polishing

Xu Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Article Physics, Applied

Low damage electrical modification of 4H-SiC via ultrafast laser irradiation

Minhyung Ahn et al.

JOURNAL OF APPLIED PHYSICS (2018)

添加到收藏夹

Article Instruments & Instrumentation

Comparison of subsurface damages on mono-crystalline silicon between traditional nanoscale machining and laser-assisted nanoscale machining via molecular dynamics simulation

Houfu Dai et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2018)

添加到收藏夹

Article Optics

Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser

Maolu Wang et al.

OPTICS AND LASER TECHNOLOGY (2018)

添加到收藏夹

Review Crystallography

High-Pressure, High-Temperature Behavior of Silicon Carbide: A Review

Kierstin Daviau et al.

CRYSTALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Catalysts based on Fenton reaction for SiC wafer in chemical magnetorheological finishing

Huazhuo Liang et al.

AIMS MATERIALS SCIENCE (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Laser-Induced Periodic Surface Structures-A Scientific Evergreen

Joern Bonse et al.

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Photocatalysis assisting the mechanical polishing of a single-crystal SiC wafer utilizing an anatase TiO2-coated diamond abrasive

Jing Lu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Structural transformations in femtosecond laser-processed n-type 4H-SiC

Z. U. Rehman et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Laser-induced phase separation of silicon carbide

Insung Choi et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A complete model of keyhole and melt pool dynamics to analyze instabilities and collapse during laser welding

Mickael Courtois et al.

JOURNAL OF LASER APPLICATIONS (2014)

添加到收藏夹

Article Engineering, Industrial

Atomic-scale flattening mechanism of 4H-SiC (0001) in plasma assisted polishing

H. Deng et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Physics, Condensed Matter

Electron-ion coupling effects on radiation damage in cubic silicon carbide

Chao Zhang et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2013)

添加到收藏夹

Article Optics

Growth of high spatial frequency periodic ripple structures on SiC crystal surfaces irradiated with successive femtosecond laser pulses

Go Obara et al.

OPTICS EXPRESS (2013)

添加到收藏夹

Article Physics, Applied

Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure

Koji Hirano et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Characterization & Testing

Debye temperature of 4H-SiC determined by X-ray powder diffraction

T. H. Peng et al.

POWDER DIFFRACTION (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cross-sectional TEM analysis of laser-induced ripple structures on the 4H-SiC single-crystal surface

T. Okada et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Theory of shear banding in metallic glasses and molecular dynamics calculations

Futoshi Shimizu et al.

MATERIALS TRANSACTIONS (2007)

添加到收藏夹

Article Physics, Condensed Matter

Including the effects of electronic stopping and electron-ion interactions in radiation damage simulations

D. M. Duffy et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2007)

添加到收藏夹

Article Thermodynamics

A semiclassical two-temperature model for ultrafast laser heating

JK Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide

P Erhart et al.

PHYSICAL REVIEW B (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.