☆ 4.7 Article

Bis(fluorosulfonyl)imide- and allyl-functionalized electrolyte additive as an interface stabilizer for Li-metal batteries

APPLIED SURFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Electrochemistry

The effect of ionic liquid-based electrolytes for dendrite-inhibited and performance-boosted lithium metal batteries

Kun Yue et al.

Summary: The study demonstrates that IL-based additives significantly improve the electrochemical performance of Lithium metal batteries, enhancing cycle number and stability, suppressing Li dendrites growth, and providing important strategies for future development of high performance LMBs.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modification of Nitrate Ion Enables Stable Solid Electrolyte Interphase in Lithium Metal Batteries

Li-Peng Hou et al.

Summary: This study proposes and validates the use of modified nitrate ions (NO3-) to improve the homogeneity of the solid electrolyte interphase (SEI) in lithium metal batteries. By forming isosorbide dinitrate (ISDN), the resonant structure of NO3- is broken and its reducibility is improved. Lithium-sulfur batteries with ISDN additives show improved cycling performance and specific energy.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Construction of a LiF-Rich and Stable SEI Film by Designing a Binary, Ion-, and Electron-Conducting Buffer Interface on the Si Surface

Linze Lv et al.

Summary: This study develops a silver-decorated mucic acid buffer interface on the silicon surface, improving the electrochemical performance of silicon anodes by enhancing their capacity and rate capability during cycling. The improved performance is mainly attributed to the reduced volume effect of silicon particles, sustained integrity of the electrode laminate, enhanced lithium diffusion on the silicon surface, improved electronic conductivity of the silicon anode, and facilitated formation of inorganic components in the solid electrolyte interface film.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Physical

Long-life silicon anodes by conformal molecular-deposited polyurea interface for lithium ion batteries

Tiansheng Mu et al.

Summary: This study successfully establishes a stable artificial SEI on silicon anodes using molecular layer deposition, greatly improving the electrochemical performance and cycling stability of the anodes.

NANO ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unshackling the reversible capacity of SiOx/graphite-based full cells via selective LiF-induced lithiation

Jinran Sun et al.

Summary: In this study, a selective LiF-induced lithiation strategy was proposed to improve the cycling stability of composite anodes, leading to better rate and cycling performances without sacrificing specific capacity. This approach offers a new method for the development of silicon/graphite composite anodes with long cycling lifetimes.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

In-situ generated Li3N/Li-Al alloy in reduced graphene oxide framework optimizing ultra-thin lithium metal electrode for solid-state batteries

Jiaqi Zhu et al.

Summary: In this study, a 40 μm thin lithium composite anode based on the AlN-embedded reduced graphene oxide (rGO) scaffold was proposed for solid-state lithium metal batteries. The composite anode facilitated well oriented Li deposition and effectively inhibited dendrite growth, leading to improved cycling capability and rate performance.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Lanhui Gu et al.

Summary: A novel SiO2@Li3PO4@carbon shell coating design has been developed to address the challenges of silicon anode in high capacity and stable cycling performance. By optimizing interfacial chemistry and mechanical structure, stable solid electrolyte interface is achieved with improved cycling stability.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Design of inorganic/organic bi-layered Li protection layer enabled dendrite-free practical Li metal battery

Seho Sun et al.

Summary: In this study, an inorganic/organic bi-layered Li protection layer was developed for high energy density Li metal batteries. The layer consists of a robust inorganic layer to prevent dendritic Li growth and a porous polymer layer to maintain high Li-ion flux. The protection layer showed stable cycle performance and high electrochemical performance.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiOx Anode

Shiming Chen et al.

Summary: This study addresses the low initial coulombic efficiency and unstable solid-electrolyte interphase (SEI) of silicon oxide (SiOx) anode material for lithium-ion batteries. An optimized chemical prelithiation method is developed to improve prelithiation efficiency and form a stable artificial SEI layer on the surface of SiOx anode, leading to significant improvement in capacity retention.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Realizing the compatibility of a Li metal anode in an all-solid-state Li-S battery by chemical iodine-vapor deposition

Chun Duan et al.

Summary: Researchers have developed a chain-like LiI layer with excellent toughness and high mechanical strength through a smart chemical iodine-vapor deposition method, improving the stability and performance of the Li/SSE interface. The LiI layer not only prevents mechanical failures but also exhibits satisfactory ionic conductivity and stability against Li metal and SSE. This advancement enables all-solid-state Li-S batteries to achieve a high discharge capacity and long cycle life, even under harsh conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Thermodynamics

A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold plates

Sepehr Mousavi et al.

Summary: The paper introduces a novel battery thermal management system using phase change materials and mini-channel cold plates, showing that battery orientation significantly affects the cooling performance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Rationally design lithiophilic surfaces toward high-energy Lithium metal battery

Zhaohuai Li et al.

Summary: A universal and scalable approach for current collectors has been developed to enhance the performance of Li metal batteries, allowing for fast Li plating/stripping, stable cycling, and broadening commercialization. The interface design accelerates Li ions self-concentration, improves surface conduction, and suppresses Li concentration polarization.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrathin and Non-Flammable Dual-Salt Polymer Electrolyte for High-Energy-Density Lithium-Metal Battery

Xidong Lin et al.

Summary: By utilizing an ultrathin and non-flammable dual-salt polymer electrolyte, stable interfaces were formed between the anode and cathode, effectively preventing the formation of Li dendrites and promoting cyclic stability in Li-metal batteries with Ni-rich cathodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Li-ion battery technology for grid application

Daiwon Choi et al.

Summary: This review provides a comprehensive overview of the current status and challenges of Li-ion battery energy storage systems for grid application, emphasizing their key role in the future grid system and the need for further research and improvements.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Carbon nanotubes loaded with carbon nano fi bers as scaffold for Li metal battery anodes

Xinrui Song et al.

Summary: CNTs/CNFs scaffold can regulate lithium metal deposition and inhibit dendrite growth, providing ample space for lithium deposition and alleviating volumetric variation during discharge/charge cycles. The electrode shows highly reversible plating/stripping behavior at different current densities, maintaining stable capacity and prolonging battery life.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

Construction of 3D porous CeO2 ceramic hosts with enhanced lithiophilicity for dendrite-free lithium metal anode

Jiawen Sun et al.

Summary: By constructing a 3D porous CeO2 ceramic host, Li metal can be uniformly deposited into the voids, eliminating dendrite growth and volume change issues. The CeO2-Li anode shows high Coulombic efficiency and cycling stability, offering a new approach for the development of safe and reliable Li metal batteries.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Zinc-Doped High-Nickel, Low-Cobalt Layered Oxide Cathodes for High-Energy-Density Lithium-Ion Batteries

Zehao Cui et al.

Summary: In high-Ni layered oxides for Li-ion batteries, incorporating a small amount of Zn can enhance cell performance, reduce capacity loss, and improve voltage retention. Zn doping facilitates a smoother phase transition, suppresses lattice distortion, and maintains the mechanical integrity of cathode particles, leading to enhanced interphase stability and improved cycling performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Salt-in-Metal Anode: Stabilizing the Solid Electrolyte Interphase to Enable Prolonged Battery Cycling

Lin Fu et al.

Summary: The concept of salt-in-metal is proposed in this study, where a Li/LiNO3 composite foil is constructed to embed LiNO3 into the bulk structure of metallic Li. This helps in achieving a stable solid electrolyte interphase (SEI) and regulating the nucleation and growth processes of Li, reducing dendritic Li growth. This approach results in stable cycling and high capacity retention for rechargeable batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual-Solvent Li-Ion Solvation Enables High-Performance Li-Metal Batteries

Hansen Wang et al.

Summary: Novel electrolyte designs, including fluorinated 1,6-dimethoxyhexane and 1,2-dimethoxyethane as solvent molecules, along with lithium bis(fluorosulfonyl)imide, enable high-performance lithium metal batteries with improved stability and ionic conductivity. The use of a dual-solvent system contributes to the anion-derived solid-electrolyte interphase and enhances the overall battery performance.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Thermodynamics

Analysis of the unsteady thermal response of a Li-ion battery pack to dynamic loads

Ali Saeed et al.

Summary: The wide adoption of electric vehicles calls for advancements in battery technology, particularly in temperature sensitivity and thermal control. This study assesses the dynamics of battery cooling through high-fidelity modeling, revealing that the battery cooling system can be approximated as a linear dynamical system under short duration and relatively low amplitude disturbances.

ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Stable all-solid-state lithium metal batteries with Li3N-LiF-enriched interface induced by lithium nitrate addition

Zhao Zhang et al.

Summary: This research introduces stable Li3N-LiF enriched interface in-situ induced by lithium nitrate (LiNO3) between poly (ethylene oxide) (PEO)-based solid electrolyte and Li anode, to improve the interface contact between solid electrolyte and Li anode, leading to homogeneous Li deposition. When paired with LiFePO4 cathode, the all-solid-state LMBs demonstrate superior cycling stability and Coulombic efficiency, showing promising prospects for potential applications.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer

Feng Wu et al.

Summary: In this study, a self-reconstructive cathode/electrolyte interphase (CEI) layer with good interfacial stability was designed for Ni-rich cathode by incorporating dendritic mesoporous silica (DMS) as a multifunctional electrolyte additive. The sample with a self-reconstructive CEI layer exhibited significantly superior cyclic stability under extended cut-off voltage or elevated temperature, and the flame-retardant effect of DMS additive contributed towards the thermal stability of the electrolyte and electrode, improving the safety aspect of the battery. This work provides new insights into reducing undesired self-reinforced failure process in Ni-rich cathode and reconstructing a self-healing CEI layer for high-safety, high-voltage lithium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Calcium- and sulfate-functionalized artificial cathode-electrolyte interphases of Ni-rich cathode materials

Kwangeun Jung et al.

Summary: The addition of a calcium sulfate precursor during thermal treatment can create an artificial Ca- and SOx-functionalized CEI layer on the surface of Ni-rich NCM cathode materials, inhibiting electrolyte decomposition and improving cycling retention of lithium-ion batteries. The modified CEI layer effectively controls undesired surface reactions such as electrolyte decomposition and metal dissolution, leading to enhanced performance of the Ni-rich NCM cathodes.

RARE METALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanosecond Laser Cleaning Method to Reduce the Surface Inert Layer and Activate the Garnet Electrolyte for a Solid-State Li Metal Battery

Linhui Chen et al.

Summary: This study presents a method to reduce the Li2CO3 layer on the garnet electrolyte surface through laser cleaning, restoring lithiophilicity and decreasing the interfacial resistance between Li and garnet. The solid-state battery with the laser-treated electrolyte showed stable cycling performance, addressing challenges in garnet-based solid-state battery applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Hybrid Ionic and Electronic Conductive Coating Layer for Enhanced Electrochemical Performance of 4.6 V LiCoO2

Tao Cheng et al.

Summary: A new coating layer was successfully applied on the LiCoO2 surface to improve its electrochemical performance under high cut-off voltage. This layer enhances the kinetics of ionic and electronic transport and acts as a protective barrier against side reactions between the cathode and electrolyte.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Ni-rich LiNi0.8Co0.1Mn0.1O2 oxide functionalized by allyl phenyl sulfone as high-performance cathode material for lithium-ion batteries

Jungyoung Ahn et al.

Summary: Introducing allyl phenyl sulfone (APS) functional electrolyte additive can effectively enhance the cycling performance of nickel-rich layered lithium metal oxides at high temperature, leading to improved overall electrochemical performance of a cell.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Physical

In-situ thermal polymerization boosts succinonitrile-based composite solid-state electrolyte for high performance Li-metal battery

Chuankai Fu et al.

Summary: A novel succinonitrile-based composite solid-state electrolyte (SN-CSSE) with high room temperature ionic conductivity and favorable thermal stability was fabricated for practical use in all-solid-state lithium-metal batteries. The electrolyte demonstrated excellent interfacial stability, cycling reversibility, and rate capability, along with superior thermal stability during thermal shock testing.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy

G. Greczynski et al.

Summary: Chemical state analysis in X-ray photoelectron spectroscopy (XPS) relies on assigning well-defined binding energy values to core level electrons originating from atoms in particular bonding configurations. Here, direct evidence is presented for the violation of this paradigm, as the C 1s peak due to C-C/C-H bonded atoms from adventitious carbon (AdC) layers splits into two distinctly different contributions. This finding exposes fundamental problems with the reliability of reported XPS data and suggests discontinuing the use of adventitious carbon in XPS.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Chemistry, Physical

Achievement of high-cyclability and high-voltage Li-metal batteries by heterogeneous SEI film with internal ionic conductivity/external electronic insulativity hybrid structure

Shao-Jian Zhang et al.

Summary: The construction of heterogeneous SEI via selective reduction of electrolytes components improves Li stability and suppresses dendrite growth. The N-rich inner layer enables fast Li+ transportation, while the C-rich outer layer exhibits an electronic insulation property. This hybrid SEI provides LMA with high Coulombic efficiency, long lifespan, and dendrite suppression.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Enabling the thermal stability of solid electrolyte interphase in Li-ion battery

Chenxi Zu et al.

Summary: The thermal safety of lithium-ion batteries is crucial for various applications, and thermal runaway can lead to hazardous incidents and battery pack failures. To enhance the thermal stability of battery systems, building a thermally stable solid/cathode electrolyte interface and incorporating functional components such as stable lithium salts and high boiling point solvents are key measures. In addition, techniques like in-situ polymerization/solidification can enhance the overall stability of the battery system.

INFOMAT (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advances of polymer binders for silicon-based anodes in high energy density lithium-ion batteries

Yu-Ming Zhao et al.

Summary: Polymer binders play a critical role in alleviating volume expansion and maintaining the integrity and stable cycling of Si-based anodes, contributing to the practical application of high-capacity anodes in lithium-ion batteries.

INFOMAT (2021)

添加到收藏夹

Article Chemistry, Physical

Porous Metals from Chemical Dealloying for Solid-State Battery Anodes

Sang Yun Han et al.

CHEMISTRY OF MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

The Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength?

Xin Shen et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Quaternized polymer binder for lithium-sulfur batteries: The effect of cation structure on battery performance

Fang Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Applied

Ion association tailoring SEI composition for Li metal anode protection

Yitao He et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Adaptive formed dual-phase interface for highly durable lithium metal anode in lithium-air batteries

Wei Liang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

High-performance lithium-ion batteries combined with bi-functionalized electrolyte additive and nickel-rich layered oxides

Kwangeun Jung et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Analytical

The synergistic effect of lithium bis(fluorosulfonyl)imide and lithium nitrate for high-performance lithium metal anode

Han Jin et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulating the Inner Helmholtz Plane for Stable Solid Electrolyte Interphase on Lithium Metal Anodes

Chong Yan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Lithiophilic CuO Nanoflowers on Ti-Mesh Inducing Lithium Lateral Plating Enabling Stable Lithium-Metal Anodes with Ultrahigh Rates and Ultralong Cycle Life

Kai Huang et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulating Lithium Nucleation via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Fanfan Liu et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

Synergistic Effect of 3D Current Collectors and ALD Surface Modification for High Coulombic Efficiency Lithium Metal Anodes

Kuan-Hung Chen et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Regulating Anions in the Solvation Sheath of Lithium Ions for Stable Lithium Metal Batteries

Xue-Qiang Zhang et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Surface Restraint Synthesis of an Organic-Inorganic Hybrid Layer for Dendrite-Free Lithium Metal Anode

Jijin Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Spatially uniform deposition of lithium metal in 3D Janus hosts

Bo Hong et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Reactivity-Guided Interface Design in Na Metal Solid-State Batteries

Yaosen Tian et al.

JOULE (2019)

添加到收藏夹

Article Electrochemistry

SEI Grown on MCMB-Electrode with Fluoroethylene Carbonate and Vinylene Carbonate Additives as Probed by In Situ DRIFTS

Yonas Beyene Yohannes et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polar polymer-solvent interaction derived favorable interphase for stable lithium metal batteries

Jiwoong Bae et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stabilizing Lithium Plating by a Biphasic Surface Layer Formed InSitu

Quan Pang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Physical

Ethoxy (pentafluoro) cyclotriphosphazene (PFPN) as a multi-functional flame retardant electrolyte additive for lithium-ion batteries

Xi Li et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional, Solid-State Mixed Electron-Ion Conductive Framework for Lithium Metal Anode

Shaomao Xu et al.

NANO LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controllable synthesis of graphene scrolls and their performance for supercapacitors

Lianlian Gao et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Chemistry, Physical

3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries

Chengbin Jin et al.

NANO ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Electrolyte additive enabled fast charging and stable cycling lithium metal batteries

Jianming Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes

Rui Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Chemistry, Physical

Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation

Alison L. Michan et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement

Wei Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Article Energy & Fuels

Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth

Kai Yan et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries

Meifen Wu et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Electrochemistry

Comparative Study on Surface Films from Ionic Liquids Containing Saturated and Unsaturated Substituent for LiCoO2

Junyoung Mun et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

添加到收藏夹

Article Chemistry, Physical

Surface film formation on a graphite electrode in Li-ion batteries:: AFM and XPS study

S Leroy et al.

SURFACE AND INTERFACE ANALYSIS (2005)

添加到收藏夹

Article Chemistry, Physical

The study of capacity fading processes of Li-ion batteries: major factors that play a role

B Markovsky et al.

JOURNAL OF POWER SOURCES (2003)

添加到收藏夹

Article Electrochemistry

Electrochemical and infrared studies of the reduction of organic carbonates

XR Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.