☆ 4.7 Article

Minimizing makespan in two-stage assembly additive manufacturing: A reinforcement learning iterated greedy algorithm

APPLIED SOFT COMPUTING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Management

A multi-objective optimization approach for exploring the cost and makespan trade-off in additive manufacturing

F. Tevhide Altekin et al.

Summary: This paper addresses the production planning problem in multi-machine additive manufacturing (AM) systems by proposing a unified model that minimizes cost and makespan objectives while considering part and job assignments. Experimental results demonstrate that when identical machines are used, the trade-off between objectives is relatively small; however, when non-identical machines are used, considering both objectives simultaneously becomes important.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

添加到收藏夹

Article Automation & Control Systems

Part-grouping and build-scheduling with sequence-dependent setup time to minimize the makespan for non-identical parallel additive manufacturing machines

Yong Jae Kim et al.

Summary: This paper addresses a part-grouping and build-scheduling problem for an additive manufacturing process with non-identical parallel additive manufacturing machines. Mixed integer linear programming model and three meta-heuristic algorithms are presented to find optimal and near-optimal solutions for the problem. Performance comparison is conducted for both small and large problem instances.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

The collaborative batching problem in multi-site additive manufacturing

Dominik Zehetner et al.

Summary: Additive Manufacturing (AM) has the potential to disrupt supply chains, and researchers have been focused on improving its operational efficiency. Collaborative production (CP) has not been sufficiently studied in the context of AM. This study aims to close this research gap by demonstrating the impact of collaborative planning in the field of AM. The proposed approach combines mixed integer programming with Genetic Algorithms to solve the collaborative multi-site batching problem, and the results show that it can significantly decrease the overall costs of AM operations.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2022)

添加到收藏夹

Article Automation & Control Systems

Sustainable negotiation-based nesting and scheduling in additive manufacturing systems: A case study and multi-objective meta-heuristic algorithms

Keivan Tafakkori et al.

Summary: This paper proposes a novel integrated framework for optimizing nesting and scheduling of parts on additive manufacturing machines. The model considers three sustainability criteria and suggests action plans and algorithms. The applicability of the model is validated through sensitivity analysis and a case study.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2022)

添加到收藏夹

Article Engineering, Industrial

Online order scheduling of multi 3D printing tasks based on the additive manufacturing cloud platform

Qiao Wu et al.

Summary: This paper studies cloud-based additive manufacturing, proposes a realistic online scheduling scenario, and constructs a mixed integer linear programming model to solve the 3D printing online scheduling problem. Simulation results show that the proposed algorithm can effectively solve this problem.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

添加到收藏夹

Article Operations Research & Management Science

Additive manufacturing scheduling problem considering assembly operations of parts

Oguzhan Ahmet Arik

Summary: Additive manufacturing (AM) is a promising general-purpose technology mainly used for producing small batch customized products. While most research focuses on reducing costs and increasing speed and availability of AM machines, there is limited investigation into scheduling problems related to AM machines.

OPERATIONAL RESEARCH (2022)

添加到收藏夹

Article Engineering, Manufacturing

Single batch processing machine scheduling with sequence-dependent setup times and multi-material parts in additive manufacturing

M. Duran Toksari et al.

Summary: This study analyzes the scheduling problem of printing multi-material parts using a single additive manufacturing machine and investigates the effects of different numbers of materials on the completion time. A mathematical model is developed to minimize the makespan of the production schedule and material changeovers.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Scheduling unrelated additive manufacturing machines with practical constraints

Kanxin Hu et al.

Summary: This paper investigates the application of additive manufacturing (AM) technology in customized production and limited human resources in the context of Industry 4.0 and the COVID-19 pandemic. It proposes a new AM scheduling problem considering unrelated parallel machines, two-dimensional packing constraints, and unequal part release times. A mixed integer linear programming model is presented to minimize the makespan, and an adaptive large neighborhood search algorithm is proposed to solve the NP-hard problem. The efficiency of the algorithm is verified using different datasets, and insights on the effects of release times and orientation selection are discussed.

COMPUTERS & OPERATIONS RESEARCH (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Adjusted Iterated Greedy for the optimization of additive manufacturing scheduling problems

Kuo-Ching Ying et al.

Summary: Additive manufacturing (AM) is revolutionizing manufacturing supply chains as a disruptive technology. This study extends the Iterated Greedy algorithm to solve the Additive Manufacturing Scheduling Problems (AMSPs) and provides a superior algorithm in terms of solution quality and stability. The study also offers directions for future development of AM and AMSPs.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

添加到收藏夹

Article Engineering, Industrial

Parallel machine scheduling with multiple processing alternatives and sequence-dependent setup times

Jun Kim et al.

Summary: This paper explores a parallel machine scheduling problem where jobs can be processed in multiple parts or in complete form, with various job splitting alternatives. By proposing a mixed integer programming model and a hybrid genetic algorithm, the study shows significant improvement in processing jobs with multiple alternatives compared to a CPLEX solution or a lower bound.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy-aware production scheduling for additive manufacturing

Sajad Karimi et al.

Summary: This study focuses on energy-aware production scheduling in additive manufacturing, aiming to minimize energy costs by analyzing process parameters and formulating scheduling decisions.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Industrial

Towards sustainable industry 4.0: A green real-time IIoT multitask scheduling architecture for distributed 3D printing services

Lamis R. Darwish et al.

Summary: The combination of Industrial Internet of Things (IIoT) and 3D printing technologies opens up new opportunities for customized manufacturing in the era of Industry 4.0. However, the challenge lies in optimizing the allocation and scheduling of personalized 3D printing tasks while respecting customized attributes and balancing workload in real-time requirements.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A reinforcement learning iterated local search for makespan minimization in additive manufacturing machine scheduling problems

Mirko Alicastro et al.

Summary: The paper proposes a Reinforcement Learning Iterated Local Search heuristic method for scheduling multiple additive manufacturing machines, which outperforms other solution approaches significantly in computational experiments.

COMPUTERS & OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A heuristic approach for a scheduling problem in additive manufacturing under technological constraints

Aymen Aloui et al.

Summary: This research focuses on the scheduling and nesting problem in additive manufacturing, aiming to minimize total delay of parts and maximize the use rate of machines. Two models for estimating production time are proposed using mixed linear programming. A heuristic approach is developed to solve large instances, providing better solutions within a reasonable time. The heuristic performances are evaluated on large instances by comparing with lower bounds obtained by relaxing the model, showing solutions found are near to the proposed lower bounds.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Machine scheduling with orientation selection and two-dimensional packing for additive manufacturing

Yuxin Che et al.

Summary: Additive manufacturing (AM) has gained increasing attention in recent years, leading to a new batch processing machine scheduling problem. This study presents a mixed integer linear programming model, a simulated annealing algorithm, and other methods to address the issue, demonstrating the advantages of considering multiple part orientations in machine scheduling.

COMPUTERS & OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Game theory based multi-task scheduling of decentralized 3D printing services in cloud manufacturing

Sicheng Liu et al.

Summary: The proposed non-cooperative game model and two-layer nested method based on genetic algorithm improve the multi-task scheduling efficiency of distributed 3D printing services in cloud manufacturing, achieving the goal of enhancing service quality and reducing costs. The experimental results demonstrate that this method outperforms traditional scheduling methods.

NEUROCOMPUTING (2021)

添加到收藏夹

Article Engineering, Industrial

Improved evolutionary algorithm for parallel batch processing machine scheduling in additive manufacturing

Jianming Zhang et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Examining additive manufacturing in supply chain context through an optimization model

Omer Faruk Yilmaz

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Decision-Support Model for Additive Manufacturing Scheduling Using an Integrative Analytic Hierarchy Process and Multi-Objective Optimization

Kasin Ransikarbum et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Genetic Algorithms for the Scheduling in Additive Manufacturing

S. Castillo-Rivera et al.

INTERNATIONAL JOURNAL OF PRODUCTION MANAGEMENT AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Production planning in 3D Printing factories

J. De Anton et al.

INTERNATIONAL JOURNAL OF PRODUCTION MANAGEMENT AND ENGINEERING (2020)

添加到收藏夹

Review Management

Deterministic assembly scheduling problems: A review and classification of concurrent-type scheduling models and solution procedures

Jose M. Framinan et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2019)

添加到收藏夹

Article Engineering, Industrial

Minimising makespan in distributed mixed no-idle flowshops

Chen-Yang Cheng et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)

添加到收藏夹

Article Engineering, Industrial

Job sizing and sequencing in additive manufacturing to control process deterioration

Yossi Luzon et al.

IISE TRANSACTIONS (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

MILP models to minimise makespan in additive manufacturing machine scheduling problems

Ibrahim Kucukkoc

COMPUTERS & OPERATIONS RESEARCH (2019)

添加到收藏夹

Article Automation & Control Systems

A dynamic order acceptance and scheduling approach for additive manufacturing on-demand production

Qiang Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Order acceptance and scheduling in direct digital manufacturing with additive manufacturing

Qiang Li et al.

IFAC PAPERSONLINE (2019)

添加到收藏夹

Article Engineering, Manufacturing

Investigating the effect of scale and scheduling strategies on the productivity of 3D managed print services

James A. Gopsill et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)

添加到收藏夹

Article Automation & Control Systems

Multi-task scheduling of distributed 3D printing services in cloud manufacturing

Longfei Zhou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Production scheduling and nesting in additive manufacturing

Akram Chergui et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2018)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Planning and Scheduling in Additive Manufacturing

Filip Dvorak et al.

INTELIGENCIA ARTIFICIAL-IBEROAMERICAL JOURNAL OF ARTIFICIAL INTELLIGENCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Action-Selection Method for Reinforcement Learning Based on Cuckoo Search Algorithm

Bilal H. Abed-alguni

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Engineering, Industrial

Minimising total cost for training and assigning multiskilled workers in seru production systems

Kuo-Ching Ying et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)

添加到收藏夹

Article Engineering, Industrial

Multi-objective optimization analysis for part-to-Printer assignment in a network of 3D fused deposition modeling

Kasin Ransikarbum et al.

JOURNAL OF MANUFACTURING SYSTEMS (2017)

添加到收藏夹

Article Computer Science, Information Systems

Minimizing Makespan in Distributed Blocking Flowshops Using Hybrid Iterated Greedy Algorithms

Kuo-Ching Ying et al.

IEEE ACCESS (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Production planning in additive manufacturing and 3D printing

Qiang Li et al.

COMPUTERS & OPERATIONS RESEARCH (2017)

添加到收藏夹

Article Engineering, Industrial

Heuristics and metaheuristics for the distributed assembly permutation flowshop scheduling problem with sequence dependent setup times

Sara Hatami et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2015)

添加到收藏夹

Article Automation & Control Systems

Metaheuristics for scheduling a no-wait flowshop manufacturing cell with sequence-dependent family setups

Kuo-Ching Ying et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.