☆ 4.5 Article

Laser waterless cleaning of residual organic solvents on the surface of polyurethane coatings

APPLIED OPTICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Optics

Surface quality of laser paint removal of marine steel: a comparative study using a Gaussian beam and a flat-top beam

Yanqun Tong et al.

Summary: This paper studies the influence of Gaussian beam and flat-top beam on surface quality in laser paint removal. The results show that Gaussian beam significantly improves the surface hardness and paint adhesion of marine steel, while the flat-top beam has higher cleaning efficiency.

APPLIED OPTICS (2022)

添加到收藏夹

Article Environmental Sciences

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach

Naila Sattar et al.

Summary: This study explores the sensitivity and selectivity of twisted nanographene analogues towards toxic chemical warfare agents. The interaction between them is analyzed through molecular structure and energy analysis. The results show that twisted nanographenes have high sensitivity and can work effectively even under humid conditions.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Optics

Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion

Gan Li et al.

Summary: The study found that optimizing processing parameters can achieve higher relative density, but cannot fully eliminate the problem of hot cracks. Surface quality issues are related to severe balling phenomenon and large gaps between tracks. In terms of low-melting-point elements content, there is a linear relationship between VED and the loss of zinc and magnesium, but no influence on the loss of copper and chromium.

OPTICS AND LASER TECHNOLOGY (2022)

添加到收藏夹

Article Optics

CO2 laser cleaning of cross-linked polymer coating on metal mesh

Yating Shi et al.

Summary: The pollution caused by chemical cleaning of polymer coatings during the recycling of printing screens can be reduced through laser cleaning. The study analyzes the interaction mechanism between laser beams and polymer coatings, constructs a laser ablation threshold model for cross-linked polymers, and discusses the principles of laser bonding and photoionization. The research findings provide a theoretical basis for further studies and serve as a reference for experiments and industrial applications.

APPLIED OPTICS (2022)

添加到收藏夹

Article Optics

Influence of surface roughness on nanosecond laser-induced shock wave enhancement effects

Lei Chen et al.

Summary: This paper proposes an effective method to improve the energy of shock waves generated by plasma diffusion and collision with gas. Experimental results using silicon targets with different roughnesses show that the intensity and energy of the shock waves increase with increasing target roughness.

APPLIED OPTICS (2022)

添加到收藏夹

Article Optics

Prediction of surface roughness in different machining methods using a texture mask feature extraction method

Hsu-Chia Pan et al.

Summary: In this study, a texture mask (TM) machine learning method is proposed for predicting metal surface roughness produced by different machining methods. Compared with other methods, the TM method is more accurate and has a shorter training time in the presence of angle deviation. The experimental results demonstrate that the TM method is suitable for texture extraction in an automatic system.

APPLIED OPTICS (2022)

添加到收藏夹

Article Chemistry, Applied

Application of Raman spectroscopy in the rapid detection of waste cooking oil

Haoquan Jin et al.

Summary: Raman spectroscopy can distinguish waste cooking oil from edible vegetable oils by utilizing specific signals at certain wavelengths, and can detect adulteration in vegetable oils when the proportions reach certain levels. This study highlights the potential of Raman spectroscopy in detecting waste cooking oil.

FOOD CHEMISTRY (2021)

添加到收藏夹

Article Optics

A state-of-the-art direct metal laser sintering of Ti6Al4V and AlSi10Mg alloys: Surface roughness, tensile strength, fatigue strength and microstructure

Kashif Ishfaq et al.

Summary: Direct metal laser sintering (DMLS) is a 3D printing technique capable of producing high strength and corrosion-resistant parts, with titanium (Ti6Al4V) and aluminum (AlSi10Mg) alloys showing promise in biomedical and automotive applications. Operating process parameters and post-processing treatments significantly impact microstructure, hardness, and fatigue strength, with pores, voids, and satellite objects being common reasons for part failure.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

UV laser decontamination of chemical warfare agent simulants CEPS and malathion

Seong-Yeon Lee et al.

Summary: UV laser irradiation was applied for decontamination of CEPS and malathion simulants, with 266 nm laser showing efficient decontamination for CEPS by producing the byproduct diphenyl disulfide. However, decontamination with 355 and 532 nm on CEPS, as well as 266 nm on malathion, was relatively inefficient. The study emphasized the importance of selecting proper laser wavelengths and supported the photochemical mechanism of UV laser decontamination.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2021)

添加到收藏夹

Article Optics

Raman lidar for remote sensing of oil in water

Toshihiro Somekawa et al.

Summary: A portable Raman lidar system has been developed for remotely detecting oil leakages in water, utilizing a frequency-doubled, Q-switched Nd:YAG laser at 532 nm. Stand-off detection of oil is achieved in a 6-m-long water tank, significantly increasing survey capability of subsea infrastructures.

APPLIED OPTICS (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Experimental Study on the Surface Property Changes of Aluminum Alloy and Stainless Steel after Impingement with Submerged Cavitation Jet

Y. F. Yang et al.

Summary: With the development of green manufacturing technology, high-pressure cavitation water jet cleaning and shot peening technologies are gradually replacing traditional high-pollution processes. Study on the impact effects of high-pressure water cavitation jets on three types of metal alloys found that different processing parameters significantly affect the mechanical properties of the alloys, improving hardness and inducing residual compressive stress in the metal surface layer under proper control of processing time and other parameters.

STRENGTH OF MATERIALS (2021)

添加到收藏夹

Article Optics

Spectrophotometric detection of fenthion in foods after extraction by magnetic zirconia

Zhengzhong Lin et al.

APPLIED OPTICS (2020)

添加到收藏夹

Article Engineering, Chemical

Use of metal oxides for the adsorptive removal of toxic organic pollutants

Mudita Nagpal et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Rapid Laser-Induced Temperature Jump Decomposition of the Nerve Agent Simulant Diisopropyl Methylphosphonate under Atmospheric Conditions

Rebecca S. Thompson et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Emission characteristics and probabilistic health risk of volatile organic compounds from solvents in wooden furniture manufacturing

Ruipeng Tong et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Clinical Neurology

Organic solvents and MS susceptibility Interaction with MS risk HLA genes

Anna Karin Hedstrom et al.

NEUROLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Pharmaceutical concentration using organic solvent forward osmosis for solvent recovery

Yue Cui et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Fate of Some Chemical Warfare Simulants Adsorbed on an Inert Surface when Exposed to Rapid Laser Initiated Heating

K. D. Gibson et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Review Biochemical Research Methods

Lipase catalysis in organic solvents: advantages and applications

Ashok Kumar et al.

BIOLOGICAL PROCEDURES ONLINE (2016)

添加到收藏夹

Article Optics

Improving the performance of high-laser-damage-threshold, multilayer dielectric pulse-compression gratings through low-temperature chemical cleaning

Heather P. Howard et al.

APPLIED OPTICS (2013)

添加到收藏夹

Article Public, Environmental & Occupational Health

Farmer Exposure to Organic Solvents During the Maintenance and Repair of Farm Machinery: A Pilot Study

Terry L. Bunn et al.

AMERICAN JOURNAL OF INDUSTRIAL MEDICINE (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Environmental assessment of chemicals: methods and application to a case study of organic solvents

S Hellweg et al.

GREEN CHEMISTRY (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.